Menu
EUR

Case IH Quantum 100 tractor parts & technical data

When the brakes or steering on a Case IH Quantum 100 need attention, this page helps with more than 40 parts for the Quantum series, trailer couplings included.

39 parts found for Case IH Quantum 100
Show:
LUK Thrust bearing PTO clutch 75 x 115 x 20 mm
8%
LUK
Thrust bearing PTO clutch 75 x 115 x 20 mm
Dimensions (mm): 75 x 115 x 20
€183,54 €151,69 €168,86 €139,55
 
Thrust bearing single PTO clutch 75 x 115 x 20 mm
Thrust bearing single PTO clutch 75 x 115 x 20 mm
Dimensions (mm): 75 x 115 x 20
€30,45 €25,17
 
Scharmüller Automatic hitch adjustable, rail 390 mm, pin 31 mm, 120 kN
8%
Scharmüller
Automatic hitch adjustable, rail 390 mm, pin 31 mm, 120 kN
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail width (mm...
€1.157,46 €956,58 €1.064,86 €880,05
 
Mirror Case IH, New Holland
8%
Mirror Case IH, New Holland
€54,37 €44,93 €50,02 €41,34
 
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
9%
Scharmüller
Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.422,99 €1.176,02 €1.297,49 €1.072,31
 
Airco compressor 12 V, R 134a, pulley Ø 112 mm, PV4, 190 ccm oil
8%
Airco compressor 12 V, R 134a, pulley Ø 112 mm, PV4, 190 ccm oil
Nominal voltage (V): 12 | Refrigerant: R 134a | Suitable oil: PAG 46 | No. of gr...
€443,40 €366,45 €407,93 €337,13
 
Ball and axial joint 300 mm, taper 20 - 22 mm, M18 x 1,5
8%
Ball and axial joint 300 mm, taper 20 - 22 mm, M18 x 1,5
A: 300 mm. C: M18 x 1,5 mm. D: M22 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 ...
€136,81 €113,07 €125,87 €104,02
 
LUK Thrust bearing 50 x 90 x 21,6 mm
8%
LUK
Thrust bearing 50 x 90 x 21,6 mm
Dimensions (mm): 50 x 90 x 21.6
€88,70 €73,31 €81,60 €67,44
 
Steering cylinder S1 Case IH, New Holland, Steyr
8%
Steering cylinder S1 Case IH, New Holland, Steyr
Reference no.: 47136495
€760,11 €628,19 €699,30 €577,93
 
LUK Clutch plate 280UKC 22 x 25 mm, 10 splines, sintered
8%
LUK
Clutch plate 280UKC 22 x 25 mm, 10 splines, sintered
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Sintered clutch l...
€162,99 €134,70 €149,95 €123,93
 
LUK Double clutch 280/280KGS6 35 x 40 mm, 14 splines, 6 lining
8%
LUK
Double clutch 280/280KGS6 35 x 40 mm, 14 splines, 6 lining
Dimensions (mm): 35 x 40 14 grooves
€813,04 €671,93 €748,00 €618,18
 
Clutch plate 280 sintered, 22 x 25 mm, 10 splines
8%
Clutch plate 280 sintered, 22 x 25 mm, 10 splines
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Sintered clutch ...
€130,06 €107,49 €119,66 €98,89
 
Clutch plate single clutch 35 x 40 mm, 14 splines
8%
Clutch plate single clutch 35 x 40 mm, 14 splines
Additional information: Made in Germany | Dimensions (mm): 35 x 40, 14 grooves
€445,21 €367,94 €409,59 €338,51
 
Seal kit steering cylinder Case IH, Fiat
8%
Seal kit steering cylinder Case IH, Fiat
€42,83 €35,40 €39,40 €32,57
 
Hydraulic lifting strut 480 mm, stroke 120 mm Case IH, New Holland
8%
Hydraulic lifting strut 480 mm, stroke 120 mm Case IH, New Holland
Type: Clevis joint/clevis joint. A: 22 mm. S: 37 mm. B: 22 mm. L: 480 mm. C: 35 ...
€538,14 €444,74 €495,09 €409,16
 
LUK Single clutch 280, 35 x 40, 14 splines Case IH, New Holland, Steyr
8%
LUK
Single clutch 280, 35 x 40, 14 splines Case IH, New Holland, Steyr
Dimensions (mm): 35 x 40 14 grooves
€766,80 €633,72 €705,46 €583,02
 
SACHS Thrust bearing 50 x 80 mm, 89 x 22 mm
8%
SACHS
Thrust bearing 50 x 80 mm, 89 x 22 mm
Dimensions (mm): 50 x 80 89 x 22
€88,38 €73,04 €81,31 €67,20
 
Double clutch DuT 280 sintered 6 lining, 35 x 40, 327 mm
Double clutch DuT 280 sintered 6 lining, 35 x 40, 327 mm
Material specifications: Sintered clutch lining | Additional information: Made i...
€596,08 €492,63
 
Thrust bearing driving clutch single 50 x 80/89 x 22 mm
8%
Thrust bearing driving clutch single 50 x 80/89 x 22 mm
Dimensions (mm): 50 x 80/89 x 22
€50,95 €42,11 €46,87 €38,74
 
Seal kit Case IH, Steyr, New Holland
8%
Seal kit Case IH, Steyr, New Holland
€210,32 €173,82 €193,49 €159,91
 
Fender bracket left complete, for fender 400 mm
8%
Fender bracket left complete, for fender 400 mm
€364,52 €301,26 €335,36 €277,16
 
Axial joint 110 mm, Ø 56 mm, M20 x 1,5 / M18 x 1,5
8%
Axial joint 110 mm, Ø 56 mm, M20 x 1,5 / M18 x 1,5
A: 110 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm.
€83,37 €68,90 €76,70 €63,39
 
Ball joint 80 mm, M14 x 1,5, M20 x 1, taper 16,2 - 18,3 mm
Ball joint 80 mm, M14 x 1,5, M20 x 1, taper 16,2 - 18,3 mm
A: 80 mm. C: M14 x 1,5 mm. D: M20 x 1 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - ...
€38,53 €31,84
 
Exhaust gas cooler Case IH, Steyr, New Holland
8%
Exhaust gas cooler Case IH, Steyr, New Holland
Description: In common rail engine technology, the exhaust gas coolers have the ...
€477,29 €394,45 €439,11 €362,90
 
EGR valve Case IH Farmall 85A-115A, 85C-115C, 95U-115U
8%
EGR valve Case IH Farmall 85A-115A, 85C-115C, 95U-115U
€711,81 €588,27 €654,87 €541,21
 
Ball joint 53 mm, M18 x 1,5, M18 x 1,5, 20 - 22,25 mm
8%
Ball joint 53 mm, M18 x 1,5, M18 x 1,5, 20 - 22,25 mm
A: 53 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 20 mm. F: 22,25 mm. Taper: 20 - 2...
€99,79 €82,47 €91,81 €75,87
 
Borg Warner Fan clutch Case IH, Steyr, New Holland
4%
Borg Warner
Fan clutch Case IH, Steyr, New Holland
€238,64 €197,22 €228,12 €188,53
 
Temperature sensor curved 35 mm Case IH, Steyr, New Holland
8%
Temperature sensor curved 35 mm Case IH, Steyr, New Holland
€119,32 €98,61 €109,77 €90,72
 
Cover Case IH, New Holland
8%
Cover Case IH, New Holland
€52,42 €43,32 €48,23 €39,86
 
Differential pressure sensor for DPF
8%
Differential pressure sensor for DPF
€45,67 €37,74 €42,02 €34,72
 
Borg Warner Fan clutch Case IH, Steyr, New Holland
4%
Borg Warner
Fan clutch Case IH, Steyr, New Holland
€204,55 €169,05 €195,53 €161,60
 
Fender bracket right complete, for fender 400 mm
8%
Fender bracket right complete, for fender 400 mm
€347,94 €287,55 €320,10 €264,55
 
Scharmüller Support plates ball 80, 3000 kg, 670 x 280 mm, thickness 50 mm Valtra
11%
Scharmüller
Support plates ball 80, 3000 kg, 670 x 280 mm, thickness 50 mm Valtra
suitable for: Valtra. Series: N5-Serie. Category: Support plates. Version: Stand...
€1.771,48 €1.464,03 €1.583,40 €1.308,60
 
Differential pressure sensor for DPF Case IH, Steyr, New Holland
8%
Differential pressure sensor for DPF Case IH, Steyr, New Holland
€45,67 €37,74 €42,02 €34,72
 
Fender bracket right complete, for fenders 240 mm
8%
Fender bracket right complete, for fenders 240 mm
€318,69 €263,38 €293,19 €242,31
 

Case IH Quantum 100 parts for the clutch, exhaust system and hitch

A tractor that spends its day pulling away, turning and stopping again wears its clutch faster than almost anything else, so that is where this page starts. There are more than 40 parts here that fit the Quantum 100, supplied by GRANIT, LUK, SACHS, Borg Warner and Scharmüller.

Clutch plates, pressure plates and thrust bearings

For the driving clutch you can choose from clutch plates, thrust bearings and double clutch assemblies, one of them with sintered linings. If the tractor is already split to replace the plate, fit a new thrust bearing at the same time. It is a small part, but a bearing that starts to squeal a few months later means splitting the tractor all over again. Check the flywheel face as well, because scoring or blue heat marks will ruin a new plate quickly. When comparing plates, count the splines in the hub of the old one so the replacement slides onto the shaft properly.

EGR valve, exhaust gas cooler and DPF sensor

On the emissions side, an EGR valve, a gasket for the EGR line, an exhaust gas cooler and a differential pressure sensor for the diesel particulate filter all fit this Case IH. When the dash shows a particulate filter fault, look at the two thin hoses between the filter and the sensor first. A cracked or loose hose gives exactly the same fault code as a failed sensor and takes minutes to check. Whenever the EGR valve comes off, fit a new gasket. One that has already been compressed tends to leak exhaust gas and leaves soot on the engine.

The cooling side is covered by a fan clutch, and for leaks there is a seal kit and a cover. A fan clutch that weeps oil or has play in its bearing lets the engine run hotter than usual under heavy draft work.

Drawbars, fender brackets and matching the number

For hitching up there are drawbars and a support plate for a ball hitch. Around the fenders you will find brackets and springs. A fender bracket that cracks has usually been shaken for years, so inspect the spring that is meant to absorb that movement when you replace the bracket.

Not sure a part suits your machine? Check the type plate to confirm it really is a Quantum 100, then compare any number stamped or cast into the old part with the reference number shown with the product on this page. Other tractors from the brand, including the rest of the Quantum range, are gathered on Case IH parts, which leads to every model that has its own page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart