Menu
EUR

New Holland T5.85 tractor parts & technical data

Servicing a New Holland T5.85 starts with the right part. This page lists more than 50 parts for steering and front axle, brakes, transmission and electrics.

53 parts found for New Holland T5.85
Show:
Scharmüller Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
16%
Scharmüller
Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.390,39 €1.149,08 €1.171,10 €967,85
 
SANDEN Aircon compressor 12 V, R134a, pulley Ø 112 mm, PV6
5%
SANDEN
Aircon compressor 12 V, R134a, pulley Ø 112 mm, PV6
Refrigerant: R134a | For compressor: SD7H15 | Reference no.: 6113 | Fixing: DM |...
€638,13 €527,38 €606,20 €500,99
 
Exhaust gas cooler Case IH, Steyr, New Holland
5%
Exhaust gas cooler Case IH, Steyr, New Holland
Description: In common rail engine technology, the exhaust gas coolers have the ...
€457,39 €378,01 €434,50 €359,09
 
Ball and axial joint 300 mm, taper 20 - 22 mm, M18 x 1,5
5%
Ball and axial joint 300 mm, taper 20 - 22 mm, M18 x 1,5
A: 300 mm. C: M18 x 1,5 mm. D: M22 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 ...
€131,10 €108,35 €124,50 €102,89
 
LUK Clutch kit Case IH JX 70 - 95, New Holland T4, T5, TD5, TN
10%
LUK
Clutch kit Case IH JX 70 - 95, New Holland T4, T5, TD5, TN
Contents: Pressure plate 458228013610, clutch plate 458328033210
€996,07 €823,20 €901,20 €744,79
 
GRANIT Seal kit Case IH, Steyr, New Holland
5%
GRANIT
Seal kit Case IH, Steyr, New Holland
€201,55 €166,57 €191,45 €158,22
 
MAHLE Alternator 14 V, 120 A, fastening 82 / 10,2 / 86 mm, pulley-Ø 55 mm
38%
MAHLE
Alternator 14 V, 120 A, fastening 82 / 10,2 / 86 mm, pulley-Ø 55 mm
Installation angle (°): r 60 | Nominal voltage (V): 14 | Nominal values (V / A):...
€518,09 €428,17 €323,75 €267,56
 
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
16%
Scharmüller
Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.364,41 €1.127,61 €1.149,20 €949,75
 
Steering cylinder New Holland T4.75-T4.105, T5.85-T5.110, TN60-TN85
10%
Steering cylinder New Holland T4.75-T4.105, T5.85-T5.110, TN60-TN85
Reference no.: 87304749
€463,48 €383,04 €419,30 €346,53
 
Airco compressor 12 V, R 134a, pulley Ø 112 mm, PV6, 190 ccm oil
5%
Airco compressor 12 V, R 134a, pulley Ø 112 mm, PV6, 190 ccm oil
Suitable oil: PAG 46 | Fixing: DM | Nominal voltage (V): 12 | Cylinder capacity ...
€468,71 €387,36 €445,25 €367,98
 
Filter outer-Ø 23 mm, bore Ø 8 mm, height 45 mm
Filter outer-Ø 23 mm, bore Ø 8 mm, height 45 mm
Dimensions: Outer Ø: 23, Hole Ø: 8 mm. Height: 45 mm.
€4,35 €3,60
 
Hydraulic top link cat. 2, 620 - 881 mm, stroke 261 mm, Ø 70 mm
5%
Hydraulic top link cat. 2, 620 - 881 mm, stroke 261 mm, Ø 70 mm
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 620 / 881 mm. Piston rod Ø D: 35 mm. Cyli...
€585,16 €483,60 €555,90 €459,42
 
LUK Clutch plate 280UKC 22 x 25 mm, 10 splines, sintered
5%
LUK
Clutch plate 280UKC 22 x 25 mm, 10 splines, sintered
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Sintered clutch l...
€156,20 €129,09 €148,35 €122,60
 
Seal kit hydraulic steering Case IH, Steyr, New Holland
5%
Seal kit hydraulic steering Case IH, Steyr, New Holland
€96,11 €79,43 €91,30 €75,45
 
Seal kit hydraulic steering New Holland
5%
Seal kit hydraulic steering New Holland
€69,48 €57,42 €66,00 €54,55
 
GRANIT Ball joint taper 20 - 22,3 mm, M18 x 1,5, M24 x 1,5 L, 106 mm
5%
GRANIT
Ball joint taper 20 - 22,3 mm, M18 x 1,5, M24 x 1,5 L, 106 mm
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 20 mm. F: 22,3 mm. Taper: 20 -...
€34,33 €28,37 €32,60 €26,94
 
Hydraulic top link cat. 2/2, 620 - 916 mm, stroke 296 mm, Ø 80 mm
5%
Hydraulic top link cat. 2/2, 620 - 916 mm, stroke 296 mm, Ø 80 mm
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 620 / 916 mm. Piston rod Ø D: 40 mm. Cyli...
€512,19 €423,30 €486,55 €402,11
 
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.621,20 €1.339,83
 
Scharmüller Automatic hitch adjustable, rail 390 mm, pin 31 mm, 120 kN
Scharmüller
Automatic hitch adjustable, rail 390 mm, pin 31 mm, 120 kN
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail width (mm...
€1.114,70 €921,24
 
LUK Torsion damper PTO shaft Ø 123 mm, Case IH, New Holland, Steyr
5%
LUK
Torsion damper PTO shaft Ø 123 mm, Case IH, New Holland, Steyr
€686,80 €567,60 €652,45 €539,21
 
Wabco Air dryer cartridge M39 x 1,5, Ø 136 mm, height 165 mm, exchange
5%
Wabco
Air dryer cartridge M39 x 1,5, Ø 136 mm, height 165 mm, exchange
Additional information: Recommended maintenance interval (under normal condition...
€39,18 €32,38 €37,20 €30,74
 
Stabilus Gas strut 180 N, 323 mm, stroke 100 mm, Case IH, New Holland, Steyr
5%
Stabilus
Gas strut 180 N, 323 mm, stroke 100 mm, Case IH, New Holland, Steyr
Menke no.: 202577 | Form: 6 | d1 (mm): 8 | Stroke (mm): 100 | A (mm): 323 | Newt...
€93,53 €77,30 €88,85 €73,43
 
Thrust bearing single PTO clutch 75 x 115 x 20 mm
Thrust bearing single PTO clutch 75 x 115 x 20 mm
Dimensions (mm): 75 x 115 x 20
€29,15 €24,09
 
Alternator 14 V, 120 A, flange 83 mm, pulley Ø 55 mm, PV x 8
5%
Alternator 14 V, 120 A, flange 83 mm, pulley Ø 55 mm, PV x 8
Belt tension hole Ø / R (mm): - / 86,0 | Nominal values (V / A): 14 / 120 | Nomi...
€164,55 €135,99 €156,30 €129,17
 
Showing 1 - 24 of 53

New Holland T5.85 parts for steering, clutch and exhaust after-treatment

The New Holland T5.85 is an all-rounder for everyday work around the yard and in the field. For this model there are more than 50 replacement parts on this page, from GRANIT, LUK, Scharmüller, MAHLE and HIFI. They are the parts you need when the steering develops play, the clutch starts to slip or an emissions warning light comes on.

Taking the play out of the steering

For the steering there are track rods, steering cylinders and seal kits for the hydraulic steering. If a steering cylinder only leaks at the rod, a seal kit is often enough. If the rod itself is scored or pitted, a new cylinder is the better choice. After replacing a track rod, always check the toe-in, or the front tyres will wear unevenly within weeks.

Clutch and alternator

For the clutch there are clutch plates and thrust bearings. If the clutch slips or you hear a whine when you press the pedal, replace the plate and the thrust bearing in one go. Alternators take care of the charging side.

Exhaust after-treatment

The T5.85 uses an EGR valve and a differential pressure sensor for the DPF, and we carry both. A workshop tip: before you replace the differential pressure sensor, inspect the thin hoses running from the sensor to the filter. Heat makes them crack or slip off, and the sensor then reports a fault even though it is fine. A breather filter and another filter are on this page as well.

At the rear and around the tractor

For hitching up there are drawbars, a hydraulic lifting strut and connector heads for the brake line. For the fenders you will find springs and a fender bracket.

  • track rods, steering cylinders and seal kits
  • clutch plates and thrust bearings
  • EGR valve and differential pressure sensor
  • alternators and filters
  • drawbars, a lifting strut and connector heads

The type plate on your T5.85 shows the serial number, and the old part often carries a reference number. Compare both with the product details before ordering.

More from the T5 range

The T5.85 belongs to the New Holland T5 series. If you also run a New Holland T5.95, New Holland T5.100, New Holland T5.105, New Holland T5.110, New Holland T5.115 or New Holland T5.120, go to that model's own page. Everything for the make is under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart