Menu
EUR

New Holland TN95 tractor parts & technical data

Own a New Holland TN95 from the TN series? You will find more than 250 matching parts here, covering electrics, lighting, and steering and front axle parts.

276 parts found for New Holland TN95
Show:
GRAMMER Tractor seat mechanical suspension PVC 480 mm, track width 187 mm
5%
GRAMMER
Tractor seat mechanical suspension PVC 480 mm, track width 187 mm
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Tra...
€295,17 €243,94 €280,40 €231,74
 
Brake reservoir Ford, Case IH, Fiat, Steyr, New Holland
5%
Brake reservoir Ford, Case IH, Fiat, Steyr, New Holland
€48,76 €40,30 €46,30 €38,26
 
Sauermann Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
5%
Sauermann
Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load capacity: 30...
€1.527,62 €1.262,50 €1.451,20 €1.199,34
 
HELLA Push button switch engine start and horn, black, bore-Ø 22,3 mm
HELLA
Push button switch engine start and horn, black, bore-Ø 22,3 mm
Version: For engine start and horn, moisture-proof push button, 2 blade terminal...
€17,45 €14,42
 
Starter ring gear Ø 335/293 mm, 110 teeth
5%
Starter ring gear Ø 335/293 mm, 110 teeth
Version: Ø 335/293 mm, 110 teeth.
€51,97 €42,95 €49,35 €40,79
 
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, PVC, 450 mm
5%
GRAMMER
Seat Compacto Basic M MSG83/521, mechanical, PVC, 450 mm
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Tra...
€980,10 €810,00 €931,00 €769,42
 
Track rod complete 338 mm, M24 x 1,5 L, taper 20 - 22 mm, M18 x 1,5
5%
Track rod complete 338 mm, M24 x 1,5 L, taper 20 - 22 mm, M18 x 1,5
A: 320 mm. B: M24 x 1,5 L mm. C: 20 - 22 mm. G: . D: M18 x 1,5 mm. E: 34 mm.
€257,51 €212,82 €244,60 €202,15
 
Cobo Headlight left / right 12 V dipped beam / main beam, R2, built-in
10%
Cobo
Headlight left / right 12 V dipped beam / main beam, R2, built-in
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. Installation location: Left, ...
€90,85 €75,08 €82,15 €67,89
 
Alternator 14 V, 65 A, flange 71,5 mm, pulley Ø 93 mm
5%
Alternator 14 V, 65 A, flange 71,5 mm, pulley Ø 93 mm
Form: A | Nominal voltage (V): 14 | Charging current (A): 65 | Belt tension hole...
€159,19 €131,56 €151,20 €124,96
 
Cobo Regulator relays 12 V, eye Ø 8,3 mm, connection 31 + 49
5%
Cobo
Regulator relays 12 V, eye Ø 8,3 mm, connection 31 + 49
Version: 12 V, enclosed with mounting eye Ø 8.3 mm, With 2 blade terminals - 31 ...
€64,37 €53,20 €61,15 €50,54
 
MAHLE Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, V/TO
6%
MAHLE
Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, V/TO
No. of grooves: 2 | Nominal voltage (V): 12 | Refrigerant: R 134a | Connection: ...
€491,79 €406,44 €461,00 €380,99
 
ROCKINGER Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
20%
ROCKINGER
Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D-value: 98...
€1.079,32 €892,00 €867,75 €717,15
 
FEBI Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
49%
FEBI
Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65...
€30,67 €25,35 €15,73 €13,00
 
MAHLE Gear reduction starter 12 V, 3,2 kW, 9 teeth, Ø 110 mm, mounting angle l 55
6%
MAHLE
Gear reduction starter 12 V, 3,2 kW, 9 teeth, Ø 110 mm, mounting angle l 55
€630,00 €520,66 €590,60 €488,10
 
Ball and axial joint 300 mm, taper 20 - 22 mm, M18 x 1,5
5%
Ball and axial joint 300 mm, taper 20 - 22 mm, M18 x 1,5
A: 300 mm. C: M18 x 1,5 mm. D: M22 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 ...
€131,10 €108,35 €124,50 €102,89
 
GRANIT Tank cap thread Ø 59 / 64 mm
5%
GRANIT
Tank cap thread Ø 59 / 64 mm
Thread Ø mm: 59 / 64.
€45,07 €37,25 €42,80 €35,37
 
GRANIT Glow plug 12 V, thread 1/2 inch BSP
GRANIT
Glow plug 12 V, thread 1/2 inch BSP
Version: 12 V, thread 1/2" BSP.
€25,70 €21,24
 
Feed pump 2 bores, hole spacing 45 mm, flange 38 mm
Feed pump 2 bores, hole spacing 45 mm, flange 38 mm
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Menke no.: 49...
€39,15 €32,36
 
GRAMMER Compacto COMFORT S MSG93/511 air suspended 12 V, seat width 400 mm
GRAMMER
Compacto COMFORT S MSG93/511 air suspended 12 V, seat width 400 mm
Suspension: Air suspension. Upholstery type: PVC. Seat contact switch: Optional....
€1.135,80 €938,68
 
Position sensor linkage for lower link shaft
5%
Position sensor linkage for lower link shaft
Version: Function: position sensor for lifting arm shaft.
€462,84 €382,51 €439,65 €363,35
 
LUK Clutch kit Case IH JX 70 - 95, New Holland T4, T5, TD5, TN
10%
LUK
Clutch kit Case IH JX 70 - 95, New Holland T4, T5, TD5, TN
Contents: Pressure plate 458228013610, clutch plate 458328033210
€996,07 €823,20 €901,20 €744,79
 
Showing 1 - 24 of 276

New Holland TN95 parts

A TN95 often handles the daily work around the barn and yard, so maintenance touches very different parts of the tractor. This page holds more than 250 parts that fit it, from GRANIT, Cobo, LUK, MAHLE and GRAMMER.

Lift linkage

For the hydraulic lift there are lifting shaft seals, lift arm shaft bushes and piston sealing rings, which are also listed for Ford and Fiat. Play in the lift arms usually comes from worn bushes. Replace the bushes on both sides and fit new seals at the same time to keep the oil in and the dirt out.

Air conditioning and cab

If you spend long summer days in the cab, you want the air conditioning to work. There are air conditioning compressors and V-belts for the compressor drive. You will also find gas struts for the door, Compacto seats, combined indicator and position lights, tank caps and ball type drawbars. If an indicator and position light only works half the time, check its earth connection first. Keep the drawbar ball lightly greased and put a cap on it when not in use. A squealing compressor belt is loose or glazed and should be replaced.

A tank cap with a blocked vent can make the engine lose power after a while because a vacuum builds up in the tank. A new cap is a quick fix.

Starting, charging and clutch

The electrical side is covered by alternators, starter motors and gear reduction starters. Check the voltage before choosing a starter, as there are versions for twelve and for twenty four volt systems. If unsure, read the plate on the old starter or measure the battery voltage. A new alternator needs a tight belt. Check it again after a few working hours, because new belts stretch a little at first.

For the clutch there are thrust bearings and double clutch assemblies, some from LUK. A thrust bearing that starts to sing when you press the clutch is best replaced in good time, as a seized bearing damages the clutch assembly too.

Choosing the right part

The type plate tells you if it really is a TN95. For seals and bushes, compare the number on the old part with the reference number shown with the product, and check left or right.

Within the TN series, the New Holland TN75 also has its own page. If one sits next to your TN95, order its parts there. For other models from the brand, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart