Menu
EUR

New Holland TN95 tractor parts & technical data

Own a New Holland TN95 from the TN series? You will find more than 250 matching parts here, covering electrics, lighting, and steering and front axle parts.

276 parts found for New Holland TN95
Show:
GRANIT Ball joint 145 mm, taper 20 - 22,3 mm, M18 x 1,5 / M18 x 1,5
5%
GRANIT
Ball joint 145 mm, taper 20 - 22,3 mm, M18 x 1,5 / M18 x 1,5
A: 145 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 20 mm. F: 22,3 mm. Taper: 20 - 2...
€94,34 €77,97 €89,60 €74,05
 
Powerband 8 ribs, 1367 mm Case IH, New Holland, Steyr
5%
Powerband 8 ribs, 1367 mm Case IH, New Holland, Steyr
Belt length: 1367 mm. Ribs: 8 n. Length: 1367 mm. Number of ribs: 8.
€79,86 €66,00 €75,85 €62,69
 
Crankshaft, 4-cylinder forged Fiat L 65-95, New Holland TN80-TN95
5%
Crankshaft, 4-cylinder forged Fiat L 65-95, New Holland TN80-TN95
Notes: Please follow the instructions in the installation guide. Please complete...
€830,81 €686,62 €789,25 €652,27
 
GRANIT Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
GRANIT
Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
Thread: M22 x 1.5.
€14,30 €11,82
 
GRANIT Tank cap thread Ø 97 / 100 mm, tank collar Ø 100 mm
GRANIT
Tank cap thread Ø 97 / 100 mm, tank collar Ø 100 mm
Thread Ø mm: 97 / 100. Filler neck Ø: 100 mm.
€38,60 €31,90
 
Bosch/Rexroth Hydraulic pump 19 cm³/rpm., taper 1:8, Ø 17,46, left Fiat, New Holland
5%
Bosch/Rexroth
Hydraulic pump 19 cm³/rpm., taper 1:8, Ø 17,46, left Fiat, New Holland
Output volume: 19 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation...
€845,79 €699,00 €803,50 €664,05
 
Bosch/Rexroth Hydraulic pump anticlockwise 11 cm³/rpm., taper 1:8, Ø 17,46, FKM
5%
Bosch/Rexroth
Hydraulic pump anticlockwise 11 cm³/rpm., taper 1:8, Ø 17,46, FKM
Output volume: 11 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation...
€350,66 €289,80 €333,10 €275,29
 
GRANIT Gas strut rear window 100 N, 405 mm, stroke 162 mm Case IH, New Holland
5%
GRANIT
Gas strut rear window 100 N, 405 mm, stroke 162 mm Case IH, New Holland
suitable for: Heckscheibe. Newtons: 100. A: 405 mm. B: 205 mm. C: 8 mm. D: 8 mm....
€44,46 €36,74 €42,20 €34,88
 
Gas strut door 200 N, 190 mm, stroke 49 mm Case IH, Steyr, New Holland
5%
Gas strut door 200 N, 190 mm, stroke 49 mm Case IH, Steyr, New Holland
suitable for: Tür. Newtons: 200. A: 190 mm. B: 120 mm. C: 10 mm. D: 10 mm. Form:...
€48,93 €40,44 €46,45 €38,39
 
GRANIT Lifting shaft sealing ring 48 x 65 x 10 mm NBR New Holland, Ford, Fiat
GRANIT
Lifting shaft sealing ring 48 x 65 x 10 mm NBR New Holland, Ford, Fiat
Dimensions: 48.00 x 65.00 x 10.00 mm. Material: NBR.
€6,50 €5,37
 
GRANIT Lifting shaft sealing ring 55 x 70 x 8/8,5 mm Ford, Fiat, New Holland
GRANIT
Lifting shaft sealing ring 55 x 70 x 8/8,5 mm Ford, Fiat, New Holland
Dimensions: 55 x 70 x 8/8.5 mm.
€3,60 €2,98
 
GRANIT Wiper motor windshield 12 V, angle 80°, M16 x 1, as conical 10 x M8
10%
GRANIT
Wiper motor windshield 12 V, angle 80°, M16 x 1, as conical 10 x M8
Volts: 12. W: konisch 10 x M8 mm. Angle: 80 °. B: 33 mm. D: M16 x 1 mm.
€300,20 €248,10 €271,60 €224,46
 
GRANIT Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
10%
GRANIT
Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
Version: Rotation angle sensor (position), electronic linkage control, For clutc...
€152,54 €126,07 €138,00 €114,05
 
GRANIT Contact switch green gruppe lever position sensor, with connector
5%
GRANIT
Contact switch green gruppe lever position sensor, with connector
Version: Green, connection cable with plug.
€137,02 €113,24 €130,15 €107,56
 
Contact switch
10%
Contact switch
€38,76 €32,03 €35,00 €28,93
 
Cobo Starter switch with key, 12 V, blade terminal, parking light, Ø 40 mm
10%
Cobo
Starter switch with key, 12 V, blade terminal, parking light, Ø 40 mm
Version: 12 V, with blade terminal, Function:, P: parking light, 0: off, 1: cons...
€64,66 €53,44 €58,50 €48,35
 
Rocker switch EHR built-in rear on the fender
5%
Rocker switch EHR built-in rear on the fender
Version: Mounting: on the rear mudguard.
€36,97 €30,55 €35,10 €29,01
 
Showing 121 - 144 of 276

New Holland TN95 parts

A TN95 often handles the daily work around the barn and yard, so maintenance touches very different parts of the tractor. This page holds more than 250 parts that fit it, from GRANIT, Cobo, LUK, MAHLE and GRAMMER.

Lift linkage

For the hydraulic lift there are lifting shaft seals, lift arm shaft bushes and piston sealing rings, which are also listed for Ford and Fiat. Play in the lift arms usually comes from worn bushes. Replace the bushes on both sides and fit new seals at the same time to keep the oil in and the dirt out.

Air conditioning and cab

If you spend long summer days in the cab, you want the air conditioning to work. There are air conditioning compressors and V-belts for the compressor drive. You will also find gas struts for the door, Compacto seats, combined indicator and position lights, tank caps and ball type drawbars. If an indicator and position light only works half the time, check its earth connection first. Keep the drawbar ball lightly greased and put a cap on it when not in use. A squealing compressor belt is loose or glazed and should be replaced.

A tank cap with a blocked vent can make the engine lose power after a while because a vacuum builds up in the tank. A new cap is a quick fix.

Starting, charging and clutch

The electrical side is covered by alternators, starter motors and gear reduction starters. Check the voltage before choosing a starter, as there are versions for twelve and for twenty four volt systems. If unsure, read the plate on the old starter or measure the battery voltage. A new alternator needs a tight belt. Check it again after a few working hours, because new belts stretch a little at first.

For the clutch there are thrust bearings and double clutch assemblies, some from LUK. A thrust bearing that starts to sing when you press the clutch is best replaced in good time, as a seized bearing damages the clutch assembly too.

Choosing the right part

The type plate tells you if it really is a TN95. For seals and bushes, compare the number on the old part with the reference number shown with the product, and check left or right.

Within the TN series, the New Holland TN75 also has its own page. If one sits next to your TN95, order its parts there. For other models from the brand, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart