Menu
EUR

New Holland TS100A tractor parts & technical data

Your New Holland TS100A is covered by more than 250 parts on this page. The TS-A series range includes trailer couplings, electrics and lighting.

280 parts found for New Holland TS100A
Show:
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.070,65 €884,83 €1.013,17 €837,33
You save 5%
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 170 mm. Colour: Black. Overhang... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
Push button switch PTO shaft with connection cable and plug
Version: Front PTO operation, Connection cable with plug. More
Version: Front PTO operation, Connection cable with plug.
€193,40 €159,83 €177,93 €147,05
You save 8%
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€77,66 €64,18 €71,45 €59,05
You save 8%
Preheating relay 12 volt with plug connection
Version: 12 V, with plug connection. More
Version: 12 V, with plug connection.
€170,59 €140,98 €156,94 €129,70
You save 8%
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.492,67 €2.060,06 €1.970,56 €1.628,56
You save 21%
Scharmüller Drawbar 242 mm, 50 x 20 mm, ISO-50, 9,3 kN, position 1
Scharmüller
Height (mm): 20 | Mounting position: 1 | Lock: ISO-50 | D-value (kN): 9,3 | Colour: Kubota grey | Version: Standard | Width (mm): 50 | Length (mm): 24... More
Height (mm): 20 | Mounting position: 1 | Lock: ISO-50 | D-value (kN): ...
€269,09 €222,39 €247,56 €204,60
You save 8%
Steering cylinder Ford, Case IH, New Holland
€648,05 €535,58 €596,21 €492,73
You save 8%
Seal kit hydraulic steering Case IH, New Holland
€106,44 €87,97 €97,92 €80,93
You save 8%
Seal kit hydraulic steering Case IH, New Holland
€47,79 €39,50 €43,97 €36,34
You save 8%
Ball joint 125 mm, taper 24 - 27 mm, 3/4" x 16 / 1 1/8" x 16
A: 125 mm. C: 3/4" x 16 mm. D: 1 1/8" x 16 mm. E: 24 mm. F: 27 mm. Taper: 24 - 27 mm. More
A: 125 mm. C: 3/4" x 16 mm. D: 1 1/8" x 16 mm. E: 24 mm. F: 27 mm. Tap...
€64,90 €53,64 €59,71 €49,35
You save 8%
Ball joint 75 mm, 7/8" x 14 mm, 1 1/4", taper 27 - 32 mm
A: 75 mm. C: 7/8" x 14 mm. D: 1 1/4" mm. E: 27 mm. F: 32 mm. Taper: 27 - 32 mm. More
A: 75 mm. C: 7/8" x 14 mm. D: 1 1/4" mm. E: 27 mm. F: 32 mm. Taper: 27...
€120,97 €99,98 €111,29 €91,98
You save 8%
Master brake cylinder mineral oil Ø 31,4 mm Case IH, New Holland, Steyr
€277,14 €229,04 €254,97 €210,72
You save 8%
Window rubber clamping range 4 - 6 mm, 23,2 x 14,5 mm - 25 meter
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm. More
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm.
€225,87 €186,67 €207,80 €171,74
You save 8%
Scharmüller Adapter plate rail width 295 mm, hole pattern 140 x 80 mm, M16
Scharmüller
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 295 mm. Hole pattern: 140 x 80 mm. Guide width: 26 mm. Plate height: 133 mm. Thread: M16. Colour... More
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 295 mm. Hole pat...
€617,18 €510,07 €512,27 €423,37
You save 17%
VICTOR REINZ Valve cover gasket Case IH, Steyr, New Holland
Tank cap thread 45 mm
Version: Thread: 45 mm. More
Version: Thread: 45 mm.
€22,91 €18,94
Thermostat gasket Case IH, Steyr, New Holland
€33,42 €27,62 €30,75 €25,41
You save 8%
Turbocharger Case IH JX 1100U, Maxxum 100, New Holland TL90A, T6010
€1.693,42 €1.399,52 €1.557,95 €1.287,56
You save 8%
Seal lift arm shaft 60 x 75 x 8,5 mm Fiat, Ford, New Holland
Dimensions: 60 x 75 x 8.5 SL mm. More
Dimensions: 60 x 75 x 8.5 SL mm.
€33,17 €27,41 €30,52 €25,22
You save 8%
Mirror 145 x 195 mm Case IH, New Holland
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm. More
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm.
€58,03 €47,96 €53,39 €44,12
You save 8%
Fender bracket left complete sprung front axle with brake MXU 100-135
€451,01 €372,74 €414,93 €342,92
You save 8%
Scharmüller Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
Scharmüller
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 147 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€952,66 €787,32 €835,29 €690,32
You save 12%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 102 kN. Description: Piton-Fix with manual lock and hei... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.504,05 €1.243,02 €1.158,85 €957,72
You save 23%
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
Spiegelarm left Case IH, New Holland
€192,61 €159,18 €177,20 €146,45
You save 8%
Wiper motor windshield Case IH, New Holland
€313,64 €259,21 €288,55 €238,47
You save 8%
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.664,08 €1.375,27 €1.315,63 €1.087,30
You save 21%
Oil pressure switch engine 1/4" BSP, 0,4 - 0,7 bar, blade terminal 6,3 mm
Version: Thread: 1/4" BSP, Switching pressure: 0.4-0.7 bar, Blade terminal 6.3 mm. Thread: 1/4" BSP. More
Version: Thread: 1/4" BSP, Switching pressure: 0.4-0.7 bar, Blade term...
€19,83 €16,38
Sensor driving speed rear axle, connection cable with plug
Version: Driving speed sensor (rear axle housing), Connection cable with plug. More
Version: Driving speed sensor (rear axle housing), Connection cable wi...
€124,37 €102,79 €114,42 €94,56
You save 8%
Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
Version: Rotation angle sensor (position), electronic linkage control, For clutch and brake operation. More
Version: Rotation angle sensor (position), electronic linkage control,...
€151,60 €125,29 €139,47 €115,27
You save 8%
Multifunction switch indicator, parking light, dipped beam
Version: With function: indicator light, parking light, dipped beam, full beam, horn. More
Version: With function: indicator light, parking light, dipped beam, f...
€167,77 €138,65 €154,35 €127,56
You save 8%
Rocker switch rear lift lifting and lowering
Version: (Rear operation) lifting and lowering. More
Version: (Rear operation) lifting and lowering.
€80,49 €66,52 €74,05 €61,20
You save 8%
Cobo Indicator/position light oval PY21W, R5W right
Cobo
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation location: Right. Cable length: 1200 mm. Type: Bulb. More
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation locatio...
€118,81 €98,19 €109,31 €90,33
You save 8%
Contact switch gear switch status LOW black
Version: Status switch, LOW (black). More
Version: Status switch, LOW (black).
€100,19 €82,80 €92,17 €76,18
You save 8%
MAHLE Gear reduction starter 12 V, 4,2 kW, 10 teeth, 245 mm, clockwise
€480,04 €396,73 €287,51 €237,61
You save 40%
Seal kit Ford Series 10-8340, New Holland TS80-TS110
€82,59 €68,26 €75,98 €62,80
You save 8%
Track rod A 1610 mm, B M18 x 1,5, D M18 x 1,5, E 40 mm
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 40 mm. More
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 4...
€187,43 €154,90 €172,44 €142,51
You save 8%
Wabco Compressor 11,5 bar, 159 cm³, Ø 75 mm, stroke 36 mm
Wabco
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.. Piston Ø: 75 mm. Piston stroke: 36 mm. Cooling system: Air. Threa... More
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed:...
€1.893,95 €1.565,25 €1.742,43 €1.440,03
You save 8%
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.088,39 €899,50 €838,59 €693,05
You save 23%
Dayco Belt tensioner Case IH MXU 100-135, Maxxum 100-145, Puma 115-165
€248,94 €205,74 €229,02 €189,28
You save 8%
Dayco Idler pulley Ø 65 mm, height 32 mm, Tector Case IH, Steyr, New Holland
Dayco
Outer Ø: 65 mm. Height: 32 mm. Installation location: Tector. More
Outer Ø: 65 mm. Height: 32 mm. Installation location: Tector.
€144,32 €119,27 €132,77 €109,73
You save 8%
Silencer with Venturi nozzle for air extraction, version L / cab
€1.077,44 €890,45 €991,24 €819,21
You save 8%
Tank cap thread 45 mm, for expansion tank
Version: Thread: 45 mm, For expansion tank. More
Version: Thread: 45 mm, For expansion tank.
€16,78 €13,86
Tank cap grommet-Ø 55 mm
Neck Ø: 55 mm. More
Neck Ø: 55 mm.
€19,59 €16,19
Showing 97 - 144 of 280

New Holland TS100A parts

This page lists more than 250 parts that fit the New Holland TS100A, sourced from GRANIT, Scharmüller, ROCKINGER, Cobo and Walterscheid. They cover the hitch, steering, hydraulics, switches and the sensors that keep the dashboard honest.

Hitching up

The rear of a TS100A takes plenty of punishment. Here you will find automatic drawbars, Piton Fix hitches, adapter plates and a drawbar retrofit kit. If you are changing from one hitch system to another, check the rail width on the tractor first, because the adapter plate has to suit both the rail and the new drawbar. Inspect the locking pin while you are at it, since that pin carries the full load of whatever is hitched behind.

Steering, linkage and engine sensors

Play in the steering usually starts at a worn ball joint, and ball joints for the track rod are listed for this model. A workshop tip: count the turns as you unscrew the old joint and wind the new one in by the same amount. The toe-in will then be close, and you only need to measure and fine-tune it.

If the linkage drops or oil weeps from the lift shaft, it is time for new seals. There are piston sealing rings, lift shaft seals and complete seal kits. On the engine side, oil pressure switches warn you when lubrication pressure falls, and sensors such as the transmission oil temperature sender keep the gauges reading correctly. A ventilated tank cap is also available. Keep its vent clear, otherwise a vacuum builds in the tank and the engine starts to starve of fuel. In the cab you will find contact switches, rocker switches, push button switches and work lamps.

Choosing the right part

Check the serial plate to make sure you have a TS100A and not another model from the TS-A range, since they look very much alike. With the old part in your hand, look for its reference number. On switches it is usually on the back, on sensors on the hex or the plug. For a ball joint, compare the thread and the taper too. A rocker switch also has to match on connections, so count the terminals on the old one before you order a replacement.

The other tractors in the TS-A range have their own pages showing only the parts that fit them.

For the rest of the brand, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart