Menu
EUR

New Holland TS100A tractor parts & technical data

Your New Holland TS100A is covered by more than 250 parts on this page. The TS-A series range includes trailer couplings, electrics and lighting.

280 parts found for New Holland TS100A
Show:
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
5%
Scharmüller
Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.070,65 €884,83 €1.013,17 €837,33
 
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
5%
Scharmüller
K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
 
Push button switch PTO shaft with connection cable and plug
8%
Push button switch PTO shaft with connection cable and plug
Version: Front PTO operation, Connection cable with plug.
€193,40 €159,83 €177,93 €147,05
 
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
8%
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€77,66 €64,18 €71,45 €59,05
 
Preheating relay 12 volt with plug connection
8%
Preheating relay 12 volt with plug connection
Version: 12 V, with plug connection.
€170,59 €140,98 €156,94 €129,70
 
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
21%
ROCKINGER
Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
Version: Lever upwards
€2.492,67 €2.060,06 €1.970,56 €1.628,56
 
Scharmüller Drawbar 242 mm, 50 x 20 mm, ISO-50, 9,3 kN, position 1
8%
Scharmüller
Drawbar 242 mm, 50 x 20 mm, ISO-50, 9,3 kN, position 1
Height (mm): 20 | Mounting position: 1 | Lock: ISO-50 | D-value (kN): 9,3 | Colo...
€269,09 €222,39 €247,56 €204,60
 
Steering cylinder Ford, Case IH, New Holland
8%
Steering cylinder Ford, Case IH, New Holland
€648,05 €535,58 €596,21 €492,73
 
Seal kit hydraulic steering Case IH, New Holland
8%
Seal kit hydraulic steering Case IH, New Holland
€106,44 €87,97 €97,92 €80,93
 
Seal kit hydraulic steering Case IH, New Holland
8%
Seal kit hydraulic steering Case IH, New Holland
€47,79 €39,50 €43,97 €36,34
 
Ball joint 125 mm, taper 24 - 27 mm, 3/4" x 16 / 1 1/8" x 16
8%
Ball joint 125 mm, taper 24 - 27 mm, 3/4" x 16 / 1 1/8" x 16
A: 125 mm. C: 3/4" x 16 mm. D: 1 1/8" x 16 mm. E: 24 mm. F: 27 mm. Taper: 24 - 2...
€64,90 €53,64 €59,71 €49,35
 
Ball joint 75 mm, 7/8" x 14 mm, 1 1/4", taper 27 - 32 mm
8%
Ball joint 75 mm, 7/8" x 14 mm, 1 1/4", taper 27 - 32 mm
A: 75 mm. C: 7/8" x 14 mm. D: 1 1/4" mm. E: 27 mm. F: 32 mm. Taper: 27 - 32 mm.
€120,97 €99,98 €111,29 €91,98
 
Master brake cylinder mineral oil Ø 31,4 mm Case IH, New Holland, Steyr
8%
Master brake cylinder mineral oil Ø 31,4 mm Case IH, New Holland, Steyr
Piston Ø: 31,4 mm.
€277,14 €229,04 €254,97 €210,72
 
Window rubber clamping range 4 - 6 mm, 23,2 x 14,5 mm - 25 meter
8%
Window rubber clamping range 4 - 6 mm, 23,2 x 14,5 mm - 25 meter
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm.
€225,87 €186,67 €207,80 €171,74
 
Scharmüller Adapter plate rail width 295 mm, hole pattern 140 x 80 mm, M16
17%
Scharmüller
Adapter plate rail width 295 mm, hole pattern 140 x 80 mm, M16
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 295 mm. Hole pattern: 140 ...
€617,18 €510,07 €512,27 €423,37
 
VICTOR REINZ Valve cover gasket Case IH, Steyr, New Holland
VICTOR REINZ
Valve cover gasket Case IH, Steyr, New Holland
€11,49 €9,49
 
Tank cap thread 45 mm
Tank cap thread 45 mm
Version: Thread: 45 mm.
€22,91 €18,94
 
Thermostat gasket Case IH, Steyr, New Holland
8%
Thermostat gasket Case IH, Steyr, New Holland
€33,42 €27,62 €30,75 €25,41
 
Turbocharger Case IH JX 1100U, Maxxum 100, New Holland TL90A, T6010
8%
Turbocharger Case IH JX 1100U, Maxxum 100, New Holland TL90A, T6010
€1.693,42 €1.399,52 €1.557,95 €1.287,56
 
Seal lift arm shaft 60 x 75 x 8,5 mm Fiat, Ford, New Holland
8%
Seal lift arm shaft 60 x 75 x 8,5 mm Fiat, Ford, New Holland
Dimensions: 60 x 75 x 8.5 SL mm.
€33,17 €27,41 €30,52 €25,22
 
Mirror 145 x 195 mm Case IH, New Holland
8%
Mirror 145 x 195 mm Case IH, New Holland
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm.
€58,03 €47,96 €53,39 €44,12
 
Fender bracket left complete sprung front axle with brake MXU 100-135
8%
Fender bracket left complete sprung front axle with brake MXU 100-135
€451,01 €372,74 €414,93 €342,92
 
Scharmüller Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
12%
Scharmüller
Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 ...
€952,66 €787,32 €835,29 €690,32
 
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
23%
ROCKINGER
Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.504,05 €1.243,02 €1.158,85 €957,72
 
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
23%
ROCKINGER
Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
Colour: Black. Description: Entire coupling body and bearing forged, Easy height...
€1.126,27 €930,80 €867,77 €717,17
 
Spiegelarm left Case IH, New Holland
8%
Spiegelarm left Case IH, New Holland
€192,61 €159,18 €177,20 €146,45
 
Wiper motor windshield Case IH, New Holland
8%
Wiper motor windshield Case IH, New Holland
€313,64 €259,21 €288,55 €238,47
 
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
21%
Walterscheid
Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 ...
€1.664,08 €1.375,27 €1.315,63 €1.087,30
 
Oil pressure switch engine 1/4" BSP, 0,4 - 0,7 bar, blade terminal 6,3 mm
Oil pressure switch engine 1/4" BSP, 0,4 - 0,7 bar, blade terminal 6,3 mm
Version: Thread: 1/4" BSP, Switching pressure: 0.4-0.7 bar, Blade terminal 6.3 m...
€19,83 €16,38
 
Sensor driving speed rear axle, connection cable with plug
8%
Sensor driving speed rear axle, connection cable with plug
Version: Driving speed sensor (rear axle housing), Connection cable with plug.
€124,37 €102,79 €114,42 €94,56
 
Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
8%
Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
Version: Rotation angle sensor (position), electronic linkage control, For clutc...
€151,60 €125,29 €139,47 €115,27
 
Multifunction switch indicator, parking light, dipped beam
8%
Multifunction switch indicator, parking light, dipped beam
Version: With function: indicator light, parking light, dipped beam, full beam, ...
€167,77 €138,65 €154,35 €127,56
 
Rocker switch rear lift lifting and lowering
8%
Rocker switch rear lift lifting and lowering
Version: (Rear operation) lifting and lowering.
€80,49 €66,52 €74,05 €61,20
 
Cobo Indicator/position light oval PY21W, R5W right
8%
Cobo
Indicator/position light oval PY21W, R5W right
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation location: Right. ...
€118,81 €98,19 €109,31 €90,33
 
Contact switch gear switch status LOW black
8%
Contact switch gear switch status LOW black
Version: Status switch, LOW (black).
€100,19 €82,80 €92,17 €76,18
 
MAHLE Gear reduction starter 12 V, 4,2 kW, 10 teeth, 245 mm, clockwise
40%
MAHLE
Gear reduction starter 12 V, 4,2 kW, 10 teeth, 245 mm, clockwise
€480,04 €396,73 €287,51 €237,61
 
Seal kit Ford Series 10-8340, New Holland TS80-TS110
8%
Seal kit Ford Series 10-8340, New Holland TS80-TS110
€82,59 €68,26 €75,98 €62,80
 
Track rod A 1610 mm, B M18 x 1,5, D M18 x 1,5, E 40 mm
8%
Track rod A 1610 mm, B M18 x 1,5, D M18 x 1,5, E 40 mm
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 40 mm.
€187,43 €154,90 €172,44 €142,51
 
Wabco Compressor 11,5 bar, 159 cm³, Ø 75 mm, stroke 36 mm
8%
Wabco
Compressor 11,5 bar, 159 cm³, Ø 75 mm, stroke 36 mm
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min...
€1.893,95 €1.565,25 €1.742,43 €1.440,03
 
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
23%
ROCKINGER
Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€1.088,39 €899,50 €838,59 €693,05
 
BOSCH Seal injection nozzle Ø 7 x 15 x 1,5 mm
BOSCH
Seal injection nozzle Ø 7 x 15 x 1,5 mm
€2,59 €2,14
 
Dayco Belt tensioner Case IH MXU 100-135, Maxxum 100-145, Puma 115-165
8%
Dayco
Belt tensioner Case IH MXU 100-135, Maxxum 100-145, Puma 115-165
€248,94 €205,74 €229,02 €189,28
 
Dayco Idler pulley Ø 65 mm, height 32 mm, Tector Case IH, Steyr, New Holland
8%
Dayco
Idler pulley Ø 65 mm, height 32 mm, Tector Case IH, Steyr, New Holland
Outer Ø: 65 mm. Height: 32 mm. Installation location: Tector.
€144,32 €119,27 €132,77 €109,73
 
Silencer with Venturi nozzle for air extraction, version L / cab
8%
Silencer with Venturi nozzle for air extraction, version L / cab
€1.077,44 €890,45 €991,24 €819,21
 
Tank cap thread 45 mm, for expansion tank
Tank cap thread 45 mm, for expansion tank
Version: Thread: 45 mm, For expansion tank.
€16,78 €13,86
 
Tank cap grommet-Ø 55 mm
Tank cap grommet-Ø 55 mm
Neck Ø: 55 mm.
€19,59 €16,19
 
Showing 97 - 144 of 280

New Holland TS100A parts

This page lists more than 250 parts that fit the New Holland TS100A, sourced from GRANIT, Scharmüller, ROCKINGER, Cobo and Walterscheid. They cover the hitch, steering, hydraulics, switches and the sensors that keep the dashboard honest.

Hitching up

The rear of a TS100A takes plenty of punishment. Here you will find automatic drawbars, Piton Fix hitches, adapter plates and a drawbar retrofit kit. If you are changing from one hitch system to another, check the rail width on the tractor first, because the adapter plate has to suit both the rail and the new drawbar. Inspect the locking pin while you are at it, since that pin carries the full load of whatever is hitched behind.

Steering, linkage and engine sensors

Play in the steering usually starts at a worn ball joint, and ball joints for the track rod are listed for this model. A workshop tip: count the turns as you unscrew the old joint and wind the new one in by the same amount. The toe-in will then be close, and you only need to measure and fine-tune it.

If the linkage drops or oil weeps from the lift shaft, it is time for new seals. There are piston sealing rings, lift shaft seals and complete seal kits. On the engine side, oil pressure switches warn you when lubrication pressure falls, and sensors such as the transmission oil temperature sender keep the gauges reading correctly. A ventilated tank cap is also available. Keep its vent clear, otherwise a vacuum builds in the tank and the engine starts to starve of fuel. In the cab you will find contact switches, rocker switches, push button switches and work lamps.

Choosing the right part

Check the serial plate to make sure you have a TS100A and not another model from the TS-A range, since they look very much alike. With the old part in your hand, look for its reference number. On switches it is usually on the back, on sensors on the hex or the plug. For a ball joint, compare the thread and the taper too. A rocker switch also has to match on connections, so count the terminals on the old one before you order a replacement.

The other tractors in the TS-A range have their own pages showing only the parts that fit them.

For the rest of the brand, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart