Menu
EUR

New Holland TS100A tractor parts & technical data

Your New Holland TS100A is covered by more than 250 parts on this page. The TS-A series range includes trailer couplings, electrics and lighting.

280 parts found for New Holland TS100A
Show:
Work lamp H3, 12 V, 55 W, square
Nominal voltage: 12 V. Form: Rectangular. Bulb: H3. Power consumption: 55 W. Bulbs included: -. More
Nominal voltage: 12 V. Form: Rectangular. Bulb: H3. Power consumption:...
€155,79 €128,75
Cobo Glass lamp left
Cobo
Installation location: Left. More
Installation location: Left.
€83,08 €68,66 €76,43 €63,17
You save 8%
Cobo Indicator/position light oval PY21W, R5W left
Cobo
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation location: Left. Cable length: 1200 mm. Type: Bulb. More
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation locatio...
€112,58 €93,04 €103,57 €85,60
You save 8%
Contact switch gear switch status HI gray
Version: Status switch, HI (grey). More
Version: Status switch, HI (grey).
€92,56 €76,50 €85,16 €70,38
You save 8%
Brake lining hand brake lining on one side Case IH, Steyr, New Holland
Brake lining hand brake pad on both sides Case IH, Steyr, New Holland
Radiator Steyr, Case IH, New Holland
To fit as:
Steyr Series Profi: 4100, 4115 Tier 3, 6115–6135 Profi
Case IH Series Farmall: 110A–125A; Series Maxxum: 100–115 Tier 3; Series MXU...
More
To fit as:
Steyr Series Profi: 4100, 4115 Tier 3, 6115–6135 Profi
...
€1.165,39 €963,13 €1.122,16 €927,41
You save 4%
Borg Warner Fan clutch Ford, Case IH, Steyr, New Holland
€343,31 €283,73 €288,79 €238,67
You save 16%
Vibration damper Case IH Farmall 85C-115C, Steyr Profi 6125, 6140
€109,31 €90,34 €100,57 €83,11
You save 8%
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Ø: 98.59 x 88.27 x 5.16 mm. More
Ø: 98.59 x 88.27 x 5.16 mm.
€4,43 €3,66
Idler pulley Ø 65 / 32 mm Case IH, Steyr, New Holland
€126,84 €104,83 €116,69 €96,44
You save 8%
Optibelt Powerband multi-rib belt 8 ribs Case IH, Steyr, New Holland
€75,87 €62,70 €69,80 €57,69
You save 8%
Cylinder head gasket 1,15 mm Case IH, Steyr, New Holland
€128,92 €106,55 €118,61 €98,02
You save 8%
Bearing for lower link shaft Ø 30 mm Ford, Case IH, Fiat, Steyr, New Holland
€64,99 €53,71 €59,79 €49,41
You save 8%
Stabilizer cat. 1, 410 mm, eye-Ø 19 mm, clevis width 44 mm
Eye Ø: 19 mm. Description: Gabelkopfbreite 44 mm. Cat.: 1. Length min./max.: 410 mm. Type: SLA-B-040. Assembly notes: Automatische Verriegelung. More
Eye Ø: 19 mm. Description: Gabelkopfbreite 44 mm. Cat.: 1. Length min...
€631,17 €521,63 €580,68 €479,90
You save 8%
Bush left lift arm shaft 62,8 x 68,2 x 40 mm Ford, Fiat, New Holland
Dimensions: 62.8 x 68.2 x 40 mm. More
Dimensions: 62.8 x 68.2 x 40 mm.
€23,03 €19,03
Seal kit Hürlimann, Deutz-Fahr, Steyr
Reference no.: 47436943. More
Reference no.: 47436943.
€81,67 €67,50 €75,14 €62,10
You save 8%
Pressure switch air conditioning line with union nut, connection cable and plug
Version: Connection with union nut, Connection cable and plug. More
Version: Connection with union nut, Connection cable and plug.
€135,73 €112,17 €124,87 €103,20
You save 8%
Light switch work light, built-in dashboard
Version: Installation: dashboard. More
Version: Installation: dashboard.
€42,12 €34,81 €38,75 €32,03
You save 8%
Cobo Direction switch 12 / 24 V, cable 700 mm, series 316
Cobo
Power rating max. 12 V: 5 A bei 12 V, 2,5 A bei 24 V. Form: Serie 316. Switching function: vorwärts - neutral - rückwärts - parken. Cable length: 7... More
Power rating max. 12 V: 5 A bei 12 V, 2,5 A bei 24 V. Form: Serie 316....
€278,54 €230,20 €256,26 €211,78
You save 8%
Work lamp H3 55 W, 12 V, square
Bulb: H3. Form: Rectangular. Nominal voltage: 12 V. Power consumption: 55 W. Bulbs included: -. More
Bulb: H3. Form: Rectangular. Nominal voltage: 12 V. Power consumption:...
€181,92 €150,35 €174,33 €144,08
You save 4%
Cobo Rear light right 262 x 99 x 152 mm, hole spacing 140 mm, M6, 12 V
Cobo
Bulb: 12V21WK / P21W, 12V21 / 5WK / P21 / 5W. Connection: Plug. Width: 262 mm. Form: Rectangular, corners rounded. Height: 99 mm. Hole spacing: 140 mm... More
Bulb: 12V21WK / P21W, 12V21 / 5WK / P21 / 5W. Connection: Plug. Width:...
€124,15 €102,60 €114,22 €94,40
You save 8%
Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal. More
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal.
€11,13 €9,19
Relays changeover contact 12 V, 10 - 20 A, without bracket, 5-pin
Version: 12 V / 10 - 20 A, Without holder, 5-pin, Connection: 3 x 4.8 mm, 2 x 6.3 mm, With parallel resistor to suppress inductive interference voltag... More
Version: 12 V / 10 - 20 A, Without holder, 5-pin, Connection: 3 x 4.8 ...
€18,88 €15,60
Flasher unit 12 V, 16 blade connections, with holder
Version: 12 V, with bracket, Control unit for indicator and hazard warning lights, 16 blade terminals. More
Version: 12 V, with bracket, Control unit for indicator and hazard war...
€253,55 €209,55 €233,27 €192,78
You save 8%
HELLA Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
HELLA
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm.
€20,33 €16,80
LUK Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
LUK
Number of teeth: 16. Tooth profile: 31X35. More
Number of teeth: 16. Tooth profile: 31X35.
€575,13 €475,31 €529,12 €437,29
You save 8%
LUK Torsion damper 16 teeth, 31X35 Case IH, Steyr, New Holland
LUK
Number of teeth: 16. Tooth profile: 31x35. More
Number of teeth: 16. Tooth profile: 31x35.
€366,09 €302,55 €336,80 €278,35
You save 8%
Sealing ring hand brake brake piston 329,6 x 336,4 x 3,4 mm
€63,04 €52,10 €58,00 €47,93
You save 8%
Brake disc Ø 327 mm, thickness 10 mm, 12 teeth
€243,39 €201,15 €223,92 €185,06
You save 8%
Replacement glass curved 315 x 225 mm, unheated Massey Ferguson, Case IH
Dimensions: 315 x 225 mm. Version: Unheated. Installation location: Right/left. More
Dimensions: 315 x 225 mm. Version: Unheated. Installation location: Ri...
€16,84 €13,92
Tank sender fuel gauge 6 cylinder Maxxum 100-140, MXU 100-135
Version: Fuel gauge, For tractors with 6-cylinder engine. More
Version: Fuel gauge, For tractors with 6-cylinder engine.
€402,48 €332,63 €370,28 €306,02
You save 8%
Tank sender fuel gauge 4 cylinder Maxxum 100-140, MXU 100, 110
Version: Fuel gauge, For tractors with 4-cylinder engine. More
Version: Fuel gauge, For tractors with 4-cylinder engine.
€475,63 €393,08 €437,58 €361,64
You save 8%
Cover for switch cut-off / controls
Version: For switch cut-out (fittings). More
Version: For switch cut-out (fittings).
€18,38 €15,19
Rocker switch EHR, 4 blade connections 6,3 mm
Version: For electronic linkage control, 4 blade terminals 6.3 mm. More
Version: For electronic linkage control, 4 blade terminals 6.3 mm.
€137,00 €113,22 €126,04 €104,17
You save 8%
Sensor temperature transmission oil
Version: For transmission oil. More
Version: For transmission oil.
€139,02 €114,89 €127,90 €105,70
You save 8%
Showing 241 - 280 of 280

New Holland TS100A parts

This page lists more than 250 parts that fit the New Holland TS100A, sourced from GRANIT, Scharmüller, ROCKINGER, Cobo and Walterscheid. They cover the hitch, steering, hydraulics, switches and the sensors that keep the dashboard honest.

Hitching up

The rear of a TS100A takes plenty of punishment. Here you will find automatic drawbars, Piton Fix hitches, adapter plates and a drawbar retrofit kit. If you are changing from one hitch system to another, check the rail width on the tractor first, because the adapter plate has to suit both the rail and the new drawbar. Inspect the locking pin while you are at it, since that pin carries the full load of whatever is hitched behind.

Steering, linkage and engine sensors

Play in the steering usually starts at a worn ball joint, and ball joints for the track rod are listed for this model. A workshop tip: count the turns as you unscrew the old joint and wind the new one in by the same amount. The toe-in will then be close, and you only need to measure and fine-tune it.

If the linkage drops or oil weeps from the lift shaft, it is time for new seals. There are piston sealing rings, lift shaft seals and complete seal kits. On the engine side, oil pressure switches warn you when lubrication pressure falls, and sensors such as the transmission oil temperature sender keep the gauges reading correctly. A ventilated tank cap is also available. Keep its vent clear, otherwise a vacuum builds in the tank and the engine starts to starve of fuel. In the cab you will find contact switches, rocker switches, push button switches and work lamps.

Choosing the right part

Check the serial plate to make sure you have a TS100A and not another model from the TS-A range, since they look very much alike. With the old part in your hand, look for its reference number. On switches it is usually on the back, on sensors on the hex or the plug. For a ball joint, compare the thread and the taper too. A rocker switch also has to match on connections, so count the terminals on the old one before you order a replacement.

The other tractors in the TS-A range have their own pages showing only the parts that fit them.

For the rest of the brand, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart