Menu
EUR

New Holland TS100A tractor parts & technical data

Your New Holland TS100A is covered by more than 250 parts on this page. The TS-A series range includes trailer couplings, electrics and lighting.

280 parts found for New Holland TS100A
Show:
Work lamp H3, 12 V, 55 W, square
Work lamp H3, 12 V, 55 W, square
Nominal voltage: 12 V. Form: Rectangular. Bulb: H3. Power consumption: 55 W. Bul...
€155,79 €128,75
 
Cobo Glass lamp left
8%
Cobo
Glass lamp left
Installation location: Left.
€83,08 €68,66 €76,43 €63,17
 
Cobo Indicator/position light oval PY21W, R5W left
8%
Cobo
Indicator/position light oval PY21W, R5W left
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation location: Left. C...
€112,58 €93,04 €103,57 €85,60
 
Contact switch gear switch status HI gray
8%
Contact switch gear switch status HI gray
Version: Status switch, HI (grey).
€92,56 €76,50 €85,16 €70,38
 
Radiator Steyr, Case IH, New Holland
4%
Radiator Steyr, Case IH, New Holland
To fit as:
Steyr Series Profi: 4100, 4115 Tier 3, 6115–6135 Profi
Case IH Seri...
€1.165,39 €963,13 €1.122,16 €927,41
 
Borg Warner Fan clutch Ford, Case IH, Steyr, New Holland
16%
Borg Warner
Fan clutch Ford, Case IH, Steyr, New Holland
€343,31 €283,73 €288,79 €238,67
 
Vibration damper Case IH Farmall 85C-115C, Steyr Profi 6125, 6140
8%
Vibration damper Case IH Farmall 85C-115C, Steyr Profi 6125, 6140
€109,31 €90,34 €100,57 €83,11
 
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Ø: 98.59 x 88.27 x 5.16 mm.
€4,43 €3,66
 
Idler pulley Ø 65 / 32 mm Case IH, Steyr, New Holland
8%
Idler pulley Ø 65 / 32 mm Case IH, Steyr, New Holland
€126,84 €104,83 €116,69 €96,44
 
Optibelt Powerband multi-rib belt 8 ribs Case IH, Steyr, New Holland
8%
Optibelt
Powerband multi-rib belt 8 ribs Case IH, Steyr, New Holland
€75,87 €62,70 €69,80 €57,69
 
Cylinder head gasket 1,15 mm Case IH, Steyr, New Holland
8%
Cylinder head gasket 1,15 mm Case IH, Steyr, New Holland
€128,92 €106,55 €118,61 €98,02
 
Pin for for- and rear window lock
Pin for for- and rear window lock
€3,26 €2,70
 
Bearing for lower link shaft Ø 30 mm Ford, Case IH, Fiat, Steyr, New Holland
8%
Bearing for lower link shaft Ø 30 mm Ford, Case IH, Fiat, Steyr, New Holland
Dimensions: Ø 30 mm.
€64,99 €53,71 €59,79 €49,41
 
Stabilizer cat. 1, 410 mm, eye-Ø 19 mm, clevis width 44 mm
8%
Stabilizer cat. 1, 410 mm, eye-Ø 19 mm, clevis width 44 mm
Eye Ø: 19 mm. Description: Gabelkopfbreite 44 mm. Cat.: 1. Length min./max.: 410...
€631,17 €521,63 €580,68 €479,90
 
Bush left lift arm shaft 62,8 x 68,2 x 40 mm Ford, Fiat, New Holland
Bush left lift arm shaft 62,8 x 68,2 x 40 mm Ford, Fiat, New Holland
Dimensions: 62.8 x 68.2 x 40 mm.
€23,03 €19,03
 
Seal kit Hürlimann, Deutz-Fahr, Steyr
8%
Seal kit Hürlimann, Deutz-Fahr, Steyr
Reference no.: 47436943.
€81,67 €67,50 €75,14 €62,10
 
Pressure switch air conditioning line with union nut, connection cable and plug
8%
Pressure switch air conditioning line with union nut, connection cable and plug
Version: Connection with union nut, Connection cable and plug.
€135,73 €112,17 €124,87 €103,20
 
Light switch work light, built-in dashboard
8%
Light switch work light, built-in dashboard
Version: Installation: dashboard.
€42,12 €34,81 €38,75 €32,03
 
Cobo Direction switch 12 / 24 V, cable 700 mm, series 316
8%
Cobo
Direction switch 12 / 24 V, cable 700 mm, series 316
Power rating max. 12 V: 5 A bei 12 V, 2,5 A bei 24 V. Form: Serie 316. Switching...
€278,54 €230,20 €256,26 €211,78
 
Work lamp H3 55 W, 12 V, square
4%
Work lamp H3 55 W, 12 V, square
Bulb: H3. Form: Rectangular. Nominal voltage: 12 V. Power consumption: 55 W. Bul...
€181,92 €150,35 €174,33 €144,08
 
Cobo Rear light right 262 x 99 x 152 mm, hole spacing 140 mm, M6, 12 V
8%
Cobo
Rear light right 262 x 99 x 152 mm, hole spacing 140 mm, M6, 12 V
Bulb: 12V21WK / P21W, 12V21 / 5WK / P21 / 5W. Connection: Plug. Width: 262 mm. F...
€124,15 €102,60 €114,22 €94,40
 
Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal.
€11,13 €9,19
 
Relays changeover contact 12 V, 10 - 20 A, without bracket, 5-pin
Relays changeover contact 12 V, 10 - 20 A, without bracket, 5-pin
Version: 12 V / 10 - 20 A, Without holder, 5-pin, Connection: 3 x 4.8 mm, 2 x 6....
€18,88 €15,60
 
Flasher unit 12 V, 16 blade connections, with holder
8%
Flasher unit 12 V, 16 blade connections, with holder
Version: 12 V, with bracket, Control unit for indicator and hazard warning light...
€253,55 €209,55 €233,27 €192,78
 
HELLA Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
HELLA
Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm.
€20,33 €16,80
 
LUK Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
8%
LUK
Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
Number of teeth: 16. Tooth profile: 31X35.
€575,13 €475,31 €529,12 €437,29
 
LUK Torsion damper 16 teeth, 31X35 Case IH, Steyr, New Holland
8%
LUK
Torsion damper 16 teeth, 31X35 Case IH, Steyr, New Holland
Number of teeth: 16. Tooth profile: 31x35.
€366,09 €302,55 €336,80 €278,35
 
Sealing ring hand brake brake piston 329,6 x 336,4 x 3,4 mm
8%
Sealing ring hand brake brake piston 329,6 x 336,4 x 3,4 mm
€63,04 €52,10 €58,00 €47,93
 
Brake disc Ø 327 mm, thickness 10 mm, 12 teeth
8%
Brake disc Ø 327 mm, thickness 10 mm, 12 teeth
€243,39 €201,15 €223,92 €185,06
 
Replacement glass curved 315 x 225 mm, unheated Massey Ferguson, Case IH
Replacement glass curved 315 x 225 mm, unheated Massey Ferguson, Case IH
Dimensions: 315 x 225 mm. Version: Unheated. Installation location: Right/left.
€16,84 €13,92
 
Tank sender fuel gauge 6 cylinder Maxxum 100-140, MXU 100-135
8%
Tank sender fuel gauge 6 cylinder Maxxum 100-140, MXU 100-135
Version: Fuel gauge, For tractors with 6-cylinder engine.
€402,48 €332,63 €370,28 €306,02
 
Tank sender fuel gauge 4 cylinder Maxxum 100-140, MXU 100, 110
8%
Tank sender fuel gauge 4 cylinder Maxxum 100-140, MXU 100, 110
Version: Fuel gauge, For tractors with 4-cylinder engine.
€475,63 €393,08 €437,58 €361,64
 
Cover for switch cut-off / controls
Cover for switch cut-off / controls
Version: For switch cut-out (fittings).
€18,38 €15,19
 
Rocker switch EHR, 4 blade connections 6,3 mm
8%
Rocker switch EHR, 4 blade connections 6,3 mm
Version: For electronic linkage control, 4 blade terminals 6.3 mm.
€137,00 €113,22 €126,04 €104,17
 
Sensor temperature transmission oil
8%
Sensor temperature transmission oil
Version: For transmission oil.
€139,02 €114,89 €127,90 €105,70
 
Showing 241 - 280 of 280

New Holland TS100A parts

This page lists more than 250 parts that fit the New Holland TS100A, sourced from GRANIT, Scharmüller, ROCKINGER, Cobo and Walterscheid. They cover the hitch, steering, hydraulics, switches and the sensors that keep the dashboard honest.

Hitching up

The rear of a TS100A takes plenty of punishment. Here you will find automatic drawbars, Piton Fix hitches, adapter plates and a drawbar retrofit kit. If you are changing from one hitch system to another, check the rail width on the tractor first, because the adapter plate has to suit both the rail and the new drawbar. Inspect the locking pin while you are at it, since that pin carries the full load of whatever is hitched behind.

Steering, linkage and engine sensors

Play in the steering usually starts at a worn ball joint, and ball joints for the track rod are listed for this model. A workshop tip: count the turns as you unscrew the old joint and wind the new one in by the same amount. The toe-in will then be close, and you only need to measure and fine-tune it.

If the linkage drops or oil weeps from the lift shaft, it is time for new seals. There are piston sealing rings, lift shaft seals and complete seal kits. On the engine side, oil pressure switches warn you when lubrication pressure falls, and sensors such as the transmission oil temperature sender keep the gauges reading correctly. A ventilated tank cap is also available. Keep its vent clear, otherwise a vacuum builds in the tank and the engine starts to starve of fuel. In the cab you will find contact switches, rocker switches, push button switches and work lamps.

Choosing the right part

Check the serial plate to make sure you have a TS100A and not another model from the TS-A range, since they look very much alike. With the old part in your hand, look for its reference number. On switches it is usually on the back, on sensors on the hex or the plug. For a ball joint, compare the thread and the taper too. A rocker switch also has to match on connections, so count the terminals on the old one before you order a replacement.

The other tractors in the TS-A range have their own pages showing only the parts that fit them.

For the rest of the brand, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart