Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Case IH CS 75 tractor parts & technical data

Keep your Case IH CS 75 working with more than 350 matching parts. The range includes trailer couplings, lighting and electrics, all selected for this model.

378 parts found for Case IH CS 75
Show:
External plate differential catch 1,5 mm, inner 49,2 mm, outer 85 mm
Version: Thickness: 1.5 mm Inner: 49.2 mm Outer: 85 mm 4 teeth More
Version: Thickness: 1.5 mm Inner: 49.2 mm Outer: 85 mm 4 teeth
€8,15 €6,74
ZF Internal plate 4WD clutch Case IH C 42 - CS 105 Pro, Farmall 115U
€38,13 €31,51 €35,08 €28,99
You save 8%
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, fan
MAHLE
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | Installation angle (°): l + r 60 | Belt width (mm) / type: - | Direction of rot... More
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | ...
€468,16 €386,91 €280,40 €231,74
You save 40%
Threaded spindle top link M24 x 3,0, 157 mm, category 2 IHC, Steyr
Category: 2 | B (mm): 90 | I (mm): M24 x 3,0 | G (mm): 157 | C (mm): 32 | A (mm): 28,4 More
Category: 2 | B (mm): 90 | I (mm): M24 x 3,0 | G (mm): 157 | C (mm): 3...
€52,17 €43,11
DANA Spicer Synchroniser unit, complete 3de / 4de gear reverse gear
€1.264,43 €1.044,98 €1.163,28 €961,38
You save 8%
Aircon compressor 12 V, pulley-Ø 135 mm, 2 grooves
Pulley Ø (mm): 135 | Oil quantity (ccm): 180 | Fixing: EM | Suitable oil: PAG 46 | Nominal voltage (V): 12 | Refrigerant: R 134a | No. of grooves: 2 More
Pulley Ø (mm): 135 | Oil quantity (ccm): 180 | Fixing: EM | Suitable ...
€654,26 €540,71 €601,92 €497,45
You save 8%
Contact switch brake light, 4 WD, start safety switch
Version: For brake light, four-wheel drive (4 WD), start safety switch More
Version: For brake light, four-wheel drive (4 WD), start safety switch
€43,48 €35,94
Rocker switch dashboard front work light
Version: Dashboard Control panel Front headlights More
Version: Dashboard Control panel Front headlights
€97,70 €80,74 €89,88 €74,28
You save 8%
SACHS Thrust bearing 106 x 140 x 25 mm
SACHS
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
€205,54 €169,87 €189,10 €156,28
You save 8%
LUK Thrust bearing PTO shaft 106 x 141 x 21 Case IH CS 75 - CS 100, Fendt
LUK
Inner Ø (mm): 106 | Width (mm): 21 | Housing: Without housing | Outer Ø (mm): 141 | Dimensions (mm): 106 x 141 x 21 More
Inner Ø (mm): 106 | Width (mm): 21 | Housing: Without housing | Outer...
€186,10 €153,80 €171,21 €141,50
You save 8%
Clutch plate 290 28 x 32 mm, 17 splines, sintered, with torsion damping
Additional information: Made in Germany | Dimensions (mm): 28 x 32 17 grooves | Material specifications: Sintered clutch lining More
Additional information: Made in Germany | Dimensions (mm): 28 x 32 17 ...
€283,64 €234,41 €260,95 €215,66
You save 8%
Alternator 14 V / 80 A, flange 55,5 mm
Belt width (mm) / type: - | Pulley spacing (mm): - | Direction of rotation: ↻ | Additional information: Dust-tight, with W connection | Belt tension... More
Belt width (mm) / type: - | Pulley spacing (mm): - | Direction of rota...
€236,43 €195,40 €217,52 €179,77
You save 8%
Elring Cylinder head gasket set 1,4 mm, combined soft material/metal gasket engine TD226B
Radiator hose, oil cooler inner-Ø 40 mm Case IH, Steyr
€6,30 €5,21
Blue Print Air filter C15165/3, AF4135
€38,32 €31,67 €17,38 €14,36
You save 55%
MAHLE Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
€505,95 €418,14 €303,03 €250,44
You save 40%
Starter motor 12 V, 3,0 kW, 11 teeth, 229,5 mm, Ø 89 mm
€315,38 €260,64 €290,15 €239,79
You save 8%
Scharmüller Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
Scharmüller
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Colour: Black. Overhang: 155 mm. Description: Height adjustable wit... More
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-val...
€996,85 €823,84 €983,19 €812,56
You save 1%
Valve seat outlet valve engine Sisu 320, 420, 620
€75,91 €62,74 €69,84 €57,72
You save 8%
GRAMMER Tractor seat Maximo Comfort Plus Case CVX, Steyr, New Holland
GRAMMER
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: ... More
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upho...
€2.247,41 €1.857,36
Gas strut rear window 200 N, 490 mm, ball socket 8 mm
Newtons: 200. A: 490 mm. B: 245 mm. C: 8 mm. D: 8 mm. To fit: rear screen. Form: 2. Menke no.: 54800. More
Newtons: 200. A: 490 mm. B: 245 mm. C: 8 mm. D: 8 mm. To fit: rear scr...
€33,16 €27,41 €30,51 €25,21
You save 8%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 102 kN. Description: Piton-Fix with manual lock and hei... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.504,05 €1.243,02 €1.158,85 €957,72
You save 23%
Spiegelarm Case IH C 42, CS 75, Steyr M 948-975
€300,70 €248,51 €276,64 €228,63
You save 8%
Hand brake switch mechanical M12, 12 V / 24 V, blade connection
Version: Thread M12, Operating voltage: 12 V/24 V, blade terminal connection. More
Version: Thread M12, Operating voltage: 12 V/24 V, blade terminal conn...
€20,80 €17,19
LED work lights spotlight 43 W, 3600 lm, 157 x 95 x 76 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 157 x 95 x 76 mm. Light function: Far-reaching illumination. Effective luminous f... More
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 1...
€72,92 €60,26 €67,09 €55,44
You save 8%
HELLA Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Dimensions W x H x D: 154 x 104 x 84 mm. Mounting type: Mounting, bolted. Conn... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€38,51 €31,83 €37,08 €30,65
You save 4%
Flasher unit electronic 12 V, 6 connections, with holder
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with bracket, with indicator light monitoring for commercial vehicles or tractors wi... More
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with...
€50,77 €41,96 €46,71 €38,60
You save 8%
HELLA Bulb R10W 12 V, 10 W, BA15s - 10 pieces
HELLA
Type: R10W | Voltage (V): 12 | Socket: BA15s | Bulb: Konventionell | Power (watts): 10 More
Type: R10W | Voltage (V): 12 | Socket: BA15s | Bulb: Konventionell | P...
€18,94 €15,65
End plate steering valve 210 bar, 140 x 40 x 104 mm
Description: Diese Endsektion ist zum Abschluss einer Wegeventilkombination erforderlich. Die Endsektion ist mit vier Bohrungen zur Befestigung des We... More
Description: Diese Endsektion ist zum Abschluss einer Wegeventilkombin...
€363,63 €300,52 €334,54 €276,48
You save 8%
Stabilus Gas strut door 300 N, 315 mm, stroke 108 mm Case IH, Steyr
Stabilus
C (mm): 8 | D (mm): 8 | Newtons: 300 | A (mm): 315 | Form: 6 | d1 (mm): 8 | B (mm): 165 | d2 (mm): 19 | To fit: Door | Stroke (mm): 108 More
C (mm): 8 | D (mm): 8 | Newtons: 300 | A (mm): 315 | Form: 6 | d1 (mm)...
€138,26 €114,26 €127,20 €105,12
You save 8%
Push button switch lift, extern circuit Case IH, Steyr
Version: Raise control hydraulics External switch (on mudguard) More
Version: Raise control hydraulics External switch (on mudguard)
€39,33 €32,50 €36,18 €29,90
You save 8%
SACHS Thrust bearing 65 x 96 x 23 mm
SACHS
Dimensions (mm): 65 x 96 x 23 More
Dimensions (mm): 65 x 96 x 23
€140,56 €116,17 €129,32 €106,87
You save 8%
LUK Clutch plate 290TDCA 28 x 32 mm, 17 splines, Case IH, Steyr
LUK
Dimensions (mm): 28 x 32 17 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 28 x 32 17 grooves | Material specifications: Sintere...
€359,30 €296,94 €330,56 €273,19
You save 8%
Clutch plate 295 28 x 32 mm, 17 splines, organic, with torsion damping
Additional information: Made in Germany | Dimensions (mm): 28 x 32 17 grooves | Material specifications: Organic clutch lining More
Additional information: Made in Germany | Dimensions (mm): 28 x 32 17 ...
€360,99 €298,34 €332,11 €274,47
You save 8%
Double clutch DuT 295 45 x 50 mm, 24 splines
Additional information: Made in Germany | Dimensions (mm): 45 x 50, 24 grooves | web (mm): 50 | Flywheel dimension (mm): 2 (erhöht) More
Additional information: Made in Germany | Dimensions (mm): 45 x 50, 24...
€1.077,03 €890,11 €1.040,87 €860,22
You save 3%
Clutch kit organic, flywheel 2 mm raised Case IH, Steyr
Contents: Clutch (445K88050101), organic disc (445S64410101), release bearing (44504080), release bearing (44504079) More
Contents: Clutch (445K88050101), organic disc (445S64410101), release ...
€1.498,75 €1.238,64 €1.378,85 €1.139,55
You save 8%
MAHLE Alternator 14 V, 120 A, flange 50,8 mm Case IH, John Deere, Laverda, Steyr
MAHLE
Form: B | Charging current (A): 120 | Installation angle (°): 0 | Mounting L / d / R (mm): 50,8 / 10,2 / 86,0 | Belt width (mm) / type: - | Nominal v... More
Form: B | Charging current (A): 120 | Installation angle (°): 0 | Mou...
€543,36 €449,06 €488,16 €403,44
You save 10%
MAHLE Alternator 14 V, 65 A, flange 50,8 mm, with fan wheel
MAHLE
Mounting hole Ø / R (mm): 10,2 / 86,0 | Direction of rotation: ↻ | Belt width (mm) / type: - | Charging current (A): 65 | Nominal voltage (V): 14 |... More
Mounting hole Ø / R (mm): 10,2 / 86,0 | Direction of rotation: ↻ | ...
€269,29 €222,55 €161,29 €133,30
You save 40%
Alternator 14 V / 65 A, flange 51 mm
Nominal values (V / A): 14 / 65 | Nominal voltage (V): 14 | Pulley Ø (mm): - | Belt tension hole Ø / R (mm): M8 / 86,0 | Direction of rotation: ↻ ... More
Nominal values (V / A): 14 / 65 | Nominal voltage (V): 14 | Pulley Ø ...
€186,73 €154,32 €171,79 €141,98
You save 8%
HELLA Alternator 14 V / 65 A, without belt pulley, Case IH, John Deere
HELLA
Charging current (A): 65 | Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 65 More
Charging current (A): 65 | Nominal voltage (V): 14 | Additional inform...
€366,59 €302,97 €282,45 €233,43
You save 23%
FEBI Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
FEBI
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95 More
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€115,03 €95,07 €98,75 €81,61
You save 14%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
€510,93 €422,26 €306,01 €252,90
You save 40%
HELLA Starter motor 12 V, 3,0 kW, 11 teeth, clockwise
€606,89 €501,56 €467,60 €386,44
You save 23%
Axial joint 208 mm, M22 x 1,5, M22 x 1,5, 38 °, Ø 56 mm, Ø 40 mm
A: 208 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. F: 38 °. Ø B: 56 mm. Ø E: 40 mm. More
A: 208 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. F: 38 °. Ø B: 56 mm. Ø...
€76,00 €62,81 €69,92 €57,79
You save 8%
Carraro Pivot bush 115 x 125 x 42 mm Carraro front axle John Deere, Case IH
Carraro
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 42 mm. More
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 42 mm.
€75,38 €62,30 €69,35 €57,31
You save 8%
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, Flange to lever end: 26 mm. Menke no.: 45815. More
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacin...
€36,59 €30,24
Bolt set 1ste steering valve 3x M8 x 90
Technical data: 3x M8 x 90. More
Technical data: 3x M8 x 90.
€18,40 €15,21
Showing 97 - 144 of 378

Case IH CS 75 parts

The CS 75 is a tractor you can still work on yourself, as long as the parts are right. More than 350 parts on this page fit the Case IH CS 75. They are made by GRANIT and by manufacturers such as Scharmüller, HELLA, ROCKINGER and MAHLE.

Starting and charging first

If the starter motor only clicks, test the battery and check that the earth cable is tight and clean of corrosion before anything else. A poor earth looks a lot like a dead starter. When the starter really has had it, you will find starter motors and alternators here, together with rocker switches and push button switches for the dash.

Sealing and cooling the engine

Much of the routine work on a CS 75 comes down to keeping things sealed. There are gaskets for the exhaust and inlet manifold and the water pump, sealing rings for the injection nozzles, O-rings for the feed pump and complete seal kits. Whenever an injector comes out of the head, fit a new sealing ring. The old one has been crushed flat, and reusing it lets combustion gas blow past, which shows up later as soot around the injector.

For the cooling system there are radiator hoses. Replace any hose that feels soft, has swollen or shows fine cracks before it splits on a hot day, and fit new clamps at the same time, since old clamps lose their tension.

Clutch, hitch and cab

Clutch thrust bearings, automatic drawbars and adapter plates for the drawbar frame cover the driveline and the rear end. In the cab you can replace work lamps and the gas struts for the rear window, which are worn out once the window refuses to stay open.

A height adjustable adapter plate helps if you switch between trailers with different drawbar heights. Set the hitch so the drawbar runs as level as possible and the eye and pin wear evenly.

Getting the right part

Note the model and chassis number from the rating plate. For engine parts it also helps to record the engine number on the block. Thrust bearings and many gaskets carry a stamped or printed number that you can compare with the reference numbers in the product description.

Other models from the CS series have a page of their own, so if you are ordering for one of those tractors, go to Case IH CS 78, Case IH CS 94, Case IH CS 110 or Case IH CS 120. Everything else from the brand is under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart