Menu
EUR

Case IH CVX 140 tractor parts & technical data

Does your Case IH CVX 140 need a new trailer coupling, electrics or lighting? You will find them here among more than 300 parts matched to this model.

316 parts found for Case IH CVX 140
Show:
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
16%
Scharmüller
Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.364,41 €1.127,61 €1.149,20 €949,75
 
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
16%
Scharmüller
Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.108,13 €915,81 €933,36 €771,37
 
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
16%
Scharmüller
Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€889,04 €734,74 €748,81 €618,85
 
Scharmüller Adaptor plate height adjustable 330 mm, hole pattern 140 x 80 mm
12%
Scharmüller
Adaptor plate height adjustable 330 mm, hole pattern 140 x 80 mm
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pattern: 140 ...
€704,78 €582,46 €623,25 €515,08
 
Scharmüller Automatic hitch rail 325 mm, coupling pin 38 mm, 2500 kg
12%
Scharmüller
Automatic hitch rail 325 mm, coupling pin 38 mm, 2500 kg
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Connecting pin: 38 ...
€1.195,30 €987,85 €1.057,10 €873,64
 
GRANIT Solenoid switch valve 132 mm, PWM-valve
GRANIT
Solenoid switch valve 132 mm, PWM-valve
Version: 132 mm, PWM valve.
€210,15 €173,68
 
HELLA Work lamp flood beam H3, 55/70 W, 12/24 V, Ø 168 x 116 mm
HELLA
Work lamp flood beam H3, 55/70 W, 12/24 V, Ø 168 x 116 mm
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installa...
€78,40 €64,79
 
External plate Ø 189 mm, 3,2 mm, 46 teeth Case IH, New Holland, Steyr
5%
External plate Ø 189 mm, 3,2 mm, 46 teeth Case IH, New Holland, Steyr
Version: Ø 189 mm, thickness: 3.2 mm, 46 splines
€89,03 €73,58 €84,55 €69,88
 
HELLA Work lamp spotlight Ultra beam H9 65 W, 12 V, 112 x 102 x 110 mm
HELLA
Work lamp spotlight Ultra beam H9 65 W, 12 V, 112 x 102 x 110 mm
Dimensions W x H x D (mm): 112 x 102 x 110 | Additional information: - With swiv...
€81,30 €67,19
 
Bosch/Rexroth Hydraulic pump 63 cm³/rpm. clockwise Case IH CVX 140 - 1195
10%
Bosch/Rexroth
Hydraulic pump 63 cm³/rpm. clockwise Case IH CVX 140 - 1195
Output volume (cc/rev): 63 | Direction of rotation: Right
€5.805,05 €4.797,56 €5.252,15 €4.340,62
 
Thrust washer Case IH, Renault, Steyr
5%
Thrust washer Case IH, Renault, Steyr
€66,79 €55,20 €63,45 €52,44
 
Bush 115 x 125 x 44 mm John Deere, Ford, Case IH, New Holland
5%
Bush 115 x 125 x 44 mm John Deere, Ford, Case IH, New Holland
€42,65 €35,25 €40,50 €33,47
 
GRANIT Bush axle housing 105 x 115 x 44 mm Case IH
5%
GRANIT
Bush axle housing 105 x 115 x 44 mm Case IH
€55,48 €45,85 €52,70 €43,55
 
GRANIT Potentiometer Carraro front axle 145109
5%
GRANIT
Potentiometer Carraro front axle 145109
€246,96 €204,10 €234,60 €193,88
 
GRANIT Axial joint 209 mm, M20 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
5%
GRANIT
Axial joint 209 mm, M20 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
A: 209 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø E: 40 mm.
€92,00 €76,03 €87,40 €72,23
 
Carraro Bush Ø 44 x 38,5 mm, length 8,9 mm Case IH, New Holland
Carraro
Bush Ø 44 x 38,5 mm, length 8,9 mm Case IH, New Holland
Outer Ø: 44 mm. Inner Ø: 38,5 mm. Length: 8,9 mm.
€16,00 €13,22
 
GRAMMER Seat Maximo Dynamic DDS MSG95AL/741, 550 mm
GRAMMER
Seat Maximo Dynamic DDS MSG95AL/741, 550 mm
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery typ...
€3.081,10 €2.546,36
 
Scharmüller Support plates ball 80, 1142 x 240 mm, 4000 kg
Scharmüller
Support plates ball 80, 1142 x 240 mm, 4000 kg
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 mm. Width:...
€2.220,60 €1.835,21
 
Heating element
5%
Heating element
€233,98 €193,37 €222,25 €183,68
 
Engine preheater, complete connection Ø 40 mm, press
5%
Engine preheater, complete connection Ø 40 mm, press
Connection: Ø 40 mm press fitting.
€427,72 €353,49 €406,30 €335,79
 
GRANIT Tank cap thread 45 mm, for expansion tank
GRANIT
Tank cap thread 45 mm, for expansion tank
Version: Thread: 45 mm, For expansion tank.
€16,00 €13,22
 
Showing 73 - 96 of 316

Case IH CVX 140 parts and how to match them

With a Case IH CVX 140, finding the right part starts at the type plate, which tells you the exact model. Check that first. From there the part you have taken off is your best reference. Bushes, sealing rings and gaskets often have no readable number left, so measure them with a caliper. Alternators, switches and work lamps usually carry a sticker or a stamped reference number to compare with the product. More than 300 parts on this page fit the CVX 140.

What is available

Around the rear linkage there are lower link shaft bushes and sealing rings. For the engine you will find a water pump gasket, an O-ring for the oil filler cap, multi-rib belts and an alternator, while seals for the lubrication lines keep oil where it belongs. In the cab there are rocker switches for the front work lights, a push button switch for lowering the front linkage, gas struts and air suspended seats. Outside, HELLA work lamps light up the job, and at the back there are drawbar hitches, adapter plates and Piton Fix parts from Scharmüller and ROCKINGER, with Carraro and GRANIT also among the makers.

Changing the multi-rib belt

A belt that squeals on a cold start often points to a weak tensioner rather than a worn belt. When you change it, spin the tensioner and idler pulleys by hand. Any bearing that rumbles or has play should be replaced at the same time, or the new belt will soon be damaged too. Take a photo of the belt routing before removing the old one so the new belt goes on the right way first time.

Bushes in the rear linkage

When the lower link shaft has play, the lift arms wobble and implements run unevenly behind the CVX 140. Press new bushes in with a suitable drift rather than hammering straight onto the edge, and put a little grease on the shaft before assembly so nothing seizes. Check the sealing rings next to the bushes at the same time, as a worn seal lets water and dirt into the new bushes.

Other CVX models

Each model in the CVX line has its own page, which helps if you look after several and want to see only the parts that suit each machine:

The rest of the brand is listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart