Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Case IH CVX 140 tractor parts & technical data

Does your Case IH CVX 140 need a new trailer coupling, electrics or lighting? You will find them here among more than 300 parts matched to this model.

316 parts found for Case IH CVX 140
Show:
Fan clutch Case IH, New Holland, Steyr
8%
Fan clutch Case IH, New Holland, Steyr
€375,36 €310,21 €345,33 €285,40
 
Cooling fan Ø 570 mm Case IH, New Holland, Steyr
8%
Cooling fan Ø 570 mm Case IH, New Holland, Steyr
Ø: 570 mm.
€202,43 €167,30 €186,24 €153,91
 
V-belt tensioner Case IH, Steyr, New Holland
8%
V-belt tensioner Case IH, Steyr, New Holland
€166,68 €137,75 €153,35 €126,73
 
O-ring Case IH, New Holland, Steyr
O-ring Case IH, New Holland, Steyr
€16,53 €13,66
 
Thermostat Ø 67 mm, 83 °C
8%
Thermostat Ø 67 mm, 83 °C
Ø: 67 mm. Temperature: 83 °C.
€39,55 €32,69 €36,39 €30,07
 
Tension spring engine brake Case IH, Steyr
Tension spring engine brake Case IH, Steyr
Description: For engine brake.
€8,36 €6,91
 
Optibelt Multi-rib belt 8 ribs Fendt, Case IH, Steyr, New Holland, Deutz-Fahr
8%
Optibelt
Multi-rib belt 8 ribs Fendt, Case IH, Steyr, New Holland, Deutz-Fahr
€85,49 €70,65 €78,65 €65,00
 
O-clamp set 115 x 3,5 mm Steyr, Massey Ferguson - 3 pieces
8%
O-clamp set 115 x 3,5 mm Steyr, Massey Ferguson - 3 pieces
Dimensions: All rings 115 x 3.5 mm.
€35,00 €28,93 €32,20 €26,61
 
Reman turbocharger Valtra-Valmet
4%
Reman turbocharger Valtra-Valmet
€1.761,36 €1.455,67 €1.687,93 €1.394,99
 
Hydraulic pump 30 / 35 cm³/rpm. Case IH, Steyr
Hydraulic pump 30 / 35 cm³/rpm. Case IH, Steyr
Output volume: 30/ 35 cc/rev.
€5.431,77 €4.489,06
 
Bush for lower link shaft 66 x 70 x 45 mm Case IH, Steyr
8%
Bush for lower link shaft 66 x 70 x 45 mm Case IH, Steyr
Dimensions: 66 x 70 x 45 mm.
€120,46 €99,55 €110,82 €91,59
 
Gas strut door 500 N, 205 mm Case IH, Steyr, New Holland
8%
Gas strut door 500 N, 205 mm Case IH, Steyr, New Holland
suitable for: Tür. Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 mm. Form: 6...
€35,93 €29,69 €33,06 €27,32
 
Walterscheid Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
18%
Walterscheid
Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 97,1 kN. C...
€1.953,30 €1.614,30 €1.594,29 €1.317,60
 
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.116,48 €922,71
 
Position sensor linkage for lower link shaft
8%
Position sensor linkage for lower link shaft
Version: Function: position sensor for lifting arm shaft.
€482,97 €399,15 €444,33 €367,22
 
Rotation angle sensor transmission clutch operation servo motor
8%
Rotation angle sensor transmission clutch operation servo motor
Version: Function: clutch operation, Rotation angle sensor, reversible PTO shaft...
€499,25 €412,60 €459,31 €379,60
 
LED work lights flood beam 30 W, 3100 lm, 150 x 72 x 68 mm, 12 / 24 V
8%
LED work lights flood beam 30 W, 3100 lm, 150 x 72 x 68 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€66,88 €55,27 €61,53 €50,85
 
LED work lights flood beam 24 W, 1200 lm, 101 x 76 mm, 12 / 24 V
8%
LED work lights flood beam 24 W, 1200 lm, 101 x 76 mm, 12 / 24 V
Nominal voltage (V): 12 / 24 | Voltage range (V): 10 - 30 | Bulb: LED | Bulbs in...
€61,19 €50,57 €56,29 €46,52
 
Alternator 14 V / 95 A, form B, flange 50,8 mm
8%
Alternator 14 V / 95 A, form B, flange 50,8 mm
To fit as: Case IH, McCormick, Steyr
€516,82 €427,12 €475,47 €392,95
 
Pin upper arm CARRARO front axle 147984 Case IH, New Holland
8%
Pin upper arm CARRARO front axle 147984 Case IH, New Holland
€170,96 €141,29 €157,28 €129,99
 
Bolt upper arm CARRARO front axle 147984 Case IH, New Holland
8%
Bolt upper arm CARRARO front axle 147984 Case IH, New Holland
€159,85 €132,11 €147,06 €121,54
 
Sealing ring 115 x 154 x 5,5 mm Ford, Case IH, Steyr, New Holland
8%
Sealing ring 115 x 154 x 5,5 mm Ford, Case IH, Steyr, New Holland
€39,84 €32,93 €36,65 €30,29
 
Bush 115 x 125 x 44 mm John Deere, Ford, Case IH, New Holland
8%
Bush 115 x 125 x 44 mm John Deere, Ford, Case IH, New Holland
€44,51 €36,79 €40,95 €33,84
 
Carraro Bush axle housing 35 x 52 x 20 mm Case IH, Massey Ferguson, New Holland
8%
Carraro
Bush axle housing 35 x 52 x 20 mm Case IH, Massey Ferguson, New Holland
€50,63 €41,84 €46,58 €38,50
 
Bush 115 x 125 x 42 mm Case IH
8%
Bush 115 x 125 x 42 mm Case IH
€56,28 €46,51 €51,78 €42,79
 
Sealing ring 150 x 180 x 14,5/16 mm Carraro front axle 644662
8%
Sealing ring 150 x 180 x 14,5/16 mm Carraro front axle 644662
€54,71 €45,21 €50,33 €41,60
 
Pin front axle Case IH, New Holland
8%
Pin front axle Case IH, New Holland
€361,87 €299,07 €332,92 €275,14
 
Carraro Bearing bush front axle 40 x 44 x 35 mm
Carraro
Bearing bush front axle 40 x 44 x 35 mm
€9,26 €7,66
 
Carraro Bearing bush front axle 44 x 44 x 30 mm Case IH, New Holland
8%
Carraro
Bearing bush front axle 44 x 44 x 30 mm Case IH, New Holland
€53,47 €44,19 €49,19 €40,65
 
ZF Brake disc brake Ø 242,5 mm, thickness 4,75 mm, inner-Ø 56 mm
8%
ZF
Brake disc brake Ø 242,5 mm, thickness 4,75 mm, inner-Ø 56 mm
€260,99 €215,69 €240,11 €198,44
 
O-ring Ø 305 x 4 mm Case IH, Steyr
8%
O-ring Ø 305 x 4 mm Case IH, Steyr
€57,32 €47,37 €52,73 €43,58
 
Wheel brake cylinder mineral oil Case IH, New Holland, Steyr
8%
Wheel brake cylinder mineral oil Case IH, New Holland, Steyr
€1.638,90 €1.354,46 €1.507,79 €1.246,11
 
Starter ring gear Ø 390/360 mm, 128 teeth Case IH, Steyr, New Holland
8%
Starter ring gear Ø 390/360 mm, 128 teeth Case IH, Steyr, New Holland
Version: Ø 390/360 mm, 128 teeth.
€150,52 €124,40 €138,48 €114,45
 
PTO shaft end piece 136 mm, 1 3/8 inch 21 splines, 8 bores
8%
PTO shaft end piece 136 mm, 1 3/8 inch 21 splines, 8 bores
Version: Length 136 mm, 1 3/8", 21 grooves, 8 holes.
€292,34 €241,60 €268,95 €222,28
 
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.732,20 €1.431,57
 
Engine preheater, complete connection Ø 40 mm, press
8%
Engine preheater, complete connection Ø 40 mm, press
Connection: Ø 40 mm press fitting.
€446,33 €368,87 €410,62 €339,36
 
Borg Warner Fan clutch M30 x 2 L, Ø 152,4 mm Steyr, Case IH
16%
Borg Warner
Fan clutch M30 x 2 L, Ø 152,4 mm Steyr, Case IH
Thread: M30 x 2 L. PCD: 152,4 mm.
€438,39 €362,31 €368,77 €304,77
 
Showing 193 - 240 of 316

Case IH CVX 140 parts and how to match them

With a Case IH CVX 140, finding the right part starts at the type plate, which tells you the exact model. Check that first. From there the part you have taken off is your best reference. Bushes, sealing rings and gaskets often have no readable number left, so measure them with a caliper. Alternators, switches and work lamps usually carry a sticker or a stamped reference number to compare with the product. More than 300 parts on this page fit the CVX 140.

What is available

Around the rear linkage there are lower link shaft bushes and sealing rings. For the engine you will find a water pump gasket, an O-ring for the oil filler cap, multi-rib belts and an alternator, while seals for the lubrication lines keep oil where it belongs. In the cab there are rocker switches for the front work lights, a push button switch for lowering the front linkage, gas struts and air suspended seats. Outside, HELLA work lamps light up the job, and at the back there are drawbar hitches, adapter plates and Piton Fix parts from Scharmüller and ROCKINGER, with Carraro and GRANIT also among the makers.

Changing the multi-rib belt

A belt that squeals on a cold start often points to a weak tensioner rather than a worn belt. When you change it, spin the tensioner and idler pulleys by hand. Any bearing that rumbles or has play should be replaced at the same time, or the new belt will soon be damaged too. Take a photo of the belt routing before removing the old one so the new belt goes on the right way first time.

Bushes in the rear linkage

When the lower link shaft has play, the lift arms wobble and implements run unevenly behind the CVX 140. Press new bushes in with a suitable drift rather than hammering straight onto the edge, and put a little grease on the shaft before assembly so nothing seizes. Check the sealing rings next to the bushes at the same time, as a worn seal lets water and dirt into the new bushes.

Other CVX models

Each model in the CVX line has its own page, which helps if you look after several and want to see only the parts that suit each machine:

The rest of the brand is listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart