Menu
EUR

Case IH CVX 140 tractor parts & technical data

Does your Case IH CVX 140 need a new trailer coupling, electrics or lighting? You will find them here among more than 300 parts matched to this model.

316 parts found for Case IH CVX 140
Show:
GRANIT O-ring bridge body Carraro front axle 145706
GRANIT
O-ring bridge body Carraro front axle 145706
€1,44 €1,19
 
Carraro Bush axle housing 35 x 52 x 20 mm Case IH, Massey Ferguson, New Holland
5%
Carraro
Bush axle housing 35 x 52 x 20 mm Case IH, Massey Ferguson, New Holland
€48,52 €40,10 €46,00 €38,02
 
GRANIT Sealing ring 150 x 180 x 14,5/16 mm Carraro front axle 644662
5%
GRANIT
Sealing ring 150 x 180 x 14,5/16 mm Carraro front axle 644662
€52,43 €43,33 €49,80 €41,16
 
Universal joint axle drive 27 x 71 mm, maintenance-free
5%
Universal joint axle drive 27 x 71 mm, maintenance-free
€76,71 €63,40 €72,85 €60,21
 
Carraro Bearing bush front axle 40 x 44 x 35 mm
Carraro
Bearing bush front axle 40 x 44 x 35 mm
€8,85 €7,31
 
ZF Shim brake Ø 248 mm, thickness 3 mm, inner-Ø 156 mm
5%
ZF
Shim brake Ø 248 mm, thickness 3 mm, inner-Ø 156 mm
€86,39 €71,40 €82,00 €67,77
 
Gaiter for brake linkage foot brake
5%
Gaiter for brake linkage foot brake
€65,94 €54,50 €62,60 €51,74
 
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
5%
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
€60,44 €49,95 €57,40 €47,44
 
GRANIT Clutch pedal return spring 98 mm, Ø 3 mm
GRANIT
Clutch pedal return spring 98 mm, Ø 3 mm
€21,80 €18,02
 
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.682,20 €1.390,25
 
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
12%
Scharmüller
Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 ...
€664,77 €549,40 €587,90 €485,87
 
Rail pressure sensor engine 74CTA-4V, 84CTA-4V, 98CTA-4V
5%
Rail pressure sensor engine 74CTA-4V, 84CTA-4V, 98CTA-4V
Menke no.: 208191.
€224,21 €185,30 €212,95 €175,99
 
GRANIT Gasket cooling channel CS 68, 75, engine Sisu 320D
5%
GRANIT
Gasket cooling channel CS 68, 75, engine Sisu 320D
€52,18 €43,12 €49,55 €40,95
 
Silencer with air extraction New Holland, Steyr, Case IH
5%
Silencer with air extraction New Holland, Steyr, Case IH
€1.539,30 €1.272,15 €1.462,30 €1.208,51
 
GRANIT Fan clutch Case IH, New Holland, Steyr
5%
GRANIT
Fan clutch Case IH, New Holland, Steyr
€359,71 €297,28 €341,70 €282,40
 
Water pump Case IH CVX 140-1195, New Holland T7510-T7550, Steyr
5%
Water pump Case IH CVX 140-1195, New Holland T7510-T7550, Steyr
€400,91 €331,33 €380,85 €314,75
 
GRANIT V-belt tensioner Case IH, Steyr, New Holland
5%
GRANIT
V-belt tensioner Case IH, Steyr, New Holland
€159,73 €132,01 €151,70 €125,37
 
GRANIT Injector Case IH, Valtra-Valmet
GRANIT
Injector Case IH, Valtra-Valmet
€686,65 €567,48
 
Gas strut hood 1000 N, 785 mm, stroke 340 mm
5%
Gas strut hood 1000 N, 785 mm, stroke 340 mm
suitable for: Motorhaube. Newtons: 1000. A: 785 mm. B: 402 mm. C: 8 mm. D: 8 mm....
€115,91 €95,79 €110,10 €90,99
 
Strut for rear screen Case IH, New Holland
5%
Strut for rear screen Case IH, New Holland
€35,27 €29,15 €33,50 €27,69
 
Showing 193 - 216 of 316

Case IH CVX 140 parts and how to match them

With a Case IH CVX 140, finding the right part starts at the type plate, which tells you the exact model. Check that first. From there the part you have taken off is your best reference. Bushes, sealing rings and gaskets often have no readable number left, so measure them with a caliper. Alternators, switches and work lamps usually carry a sticker or a stamped reference number to compare with the product. More than 300 parts on this page fit the CVX 140.

What is available

Around the rear linkage there are lower link shaft bushes and sealing rings. For the engine you will find a water pump gasket, an O-ring for the oil filler cap, multi-rib belts and an alternator, while seals for the lubrication lines keep oil where it belongs. In the cab there are rocker switches for the front work lights, a push button switch for lowering the front linkage, gas struts and air suspended seats. Outside, HELLA work lamps light up the job, and at the back there are drawbar hitches, adapter plates and Piton Fix parts from Scharmüller and ROCKINGER, with Carraro and GRANIT also among the makers.

Changing the multi-rib belt

A belt that squeals on a cold start often points to a weak tensioner rather than a worn belt. When you change it, spin the tensioner and idler pulleys by hand. Any bearing that rumbles or has play should be replaced at the same time, or the new belt will soon be damaged too. Take a photo of the belt routing before removing the old one so the new belt goes on the right way first time.

Bushes in the rear linkage

When the lower link shaft has play, the lift arms wobble and implements run unevenly behind the CVX 140. Press new bushes in with a suitable drift rather than hammering straight onto the edge, and put a little grease on the shaft before assembly so nothing seizes. Check the sealing rings next to the bushes at the same time, as a worn seal lets water and dirt into the new bushes.

Other CVX models

Each model in the CVX line has its own page, which helps if you look after several and want to see only the parts that suit each machine:

The rest of the brand is listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart