Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Case IH MXM 155 tractor parts & technical data

There is always something to replace on a Case IH MXM 155. This page lists more than 250 parts for the MXM series, such as trailer couplings and electrics.

239 parts found for Case IH MXM 155
Show:
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
8%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€36,91 €30,50 €33,96 €28,06
 
Wabco Quick exhaust valve M22 x 1,5, 12 bar, with double non-return valve
8%
Wabco
Quick exhaust valve M22 x 1,5, 12 bar, with double non-return valve
Operating pressure max. (bar): 12 | Fixing: 2 holes Ø 9.5 mm | To fit: Including...
€65,78 €54,36 €60,52 €50,01
 
External plate 4 WD 1,5 mm, inner 100 mm, outer 152 mm, 6 teeth
External plate 4 WD 1,5 mm, inner 100 mm, outer 152 mm, 6 teeth
Version: Thickness: 1.5 mm Inner: 100 mm Outer: 152 mm 6 teeth
€11,19 €9,25
 
Aircon compressor 12 V, Ø 119 mm, 8 grooves, 135 ccm, 154 cm³
8%
Aircon compressor 12 V, Ø 119 mm, 8 grooves, 135 ccm, 154 cm³
No. of grooves: 8 | Cylinder capacity (cm³): 154 | Oil quantity (ccm): 135 | Fix...
€464,52 €383,90 €427,36 €353,19
 
Expansion valve airco 10 - 14 mm Case IH, Fiat, Ford, New Holland
8%
Expansion valve airco 10 - 14 mm Case IH, Fiat, Ford, New Holland
Equipment: O-ring | Connection thread E: 14 mm | Connection thread A: 10 mm
€82,40 €68,10 €75,81 €62,65
 
LUK Torsion damper Ø 348 mm, 35x40, 14 teeth Case IH, New Holland
8%
LUK
Torsion damper Ø 348 mm, 35x40, 14 teeth Case IH, New Holland
Tooth profile: 35x40 | Number of teeth: 14 | Diameter (mm): 348
€575,94 €475,98 €529,86 €437,90
 
MAHLE Alternator 14 V, 120 A, pulley-Ø 67 mm Case IH, New Holland
40%
MAHLE
Alternator 14 V, 120 A, pulley-Ø 67 mm Case IH, New Holland
Installation angle (°): r 60 | Flange size (mm): 82,0 | Pulley spacing (mm): 32,...
€548,03 €452,92 €328,24 €271,28
 
Alternator 14 V / 120 A, flange 83 mm
8%
Alternator 14 V / 120 A, flange 83 mm
Flange size (mm): 83,0 | Nominal values (V / A): 14 / 120 | Additional informati...
€260,06 €214,93 €239,26 €197,73
 
Starter motor with reduction 12 V, 4,2 kW, 10 teeth, 253,5 mm, Ø 92 mm
8%
Starter motor with reduction 12 V, 4,2 kW, 10 teeth, 253,5 mm, Ø 92 mm
€381,90 €315,62 €351,35 €290,37
 
Starter motor 12V 3,1 kW, 10 teeth clockwise, 257,5 mm
8%
Starter motor 12V 3,1 kW, 10 teeth clockwise, 257,5 mm
€301,49 €249,17 €277,37 €229,23
 
ROCKINGER Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
23%
ROCKINGER
Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D-value: 98...
€1.126,27 €930,80 €867,77 €717,17
 
Scharmüller Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
1%
Scharmüller
Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-value: 89,3 k...
€996,85 €823,84 €983,19 €812,56
 
Tank cap thread 45 mm
Tank cap thread 45 mm
Version: Thread: 45 mm.
€22,91 €18,94
 
Connecting rod bearing Ø 69,8 mm, width 32 mm
8%
Connecting rod bearing Ø 69,8 mm, width 32 mm
Dimensions: Ø 69.8 mm, Width 32 mm.
€32,90 €27,19 €30,27 €25,01
 
GRAMMER Tractor seat Maximo Comfort Plus Case CVX, Steyr, New Holland
GRAMMER
Tractor seat Maximo Comfort Plus Case CVX, Steyr, New Holland
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery typ...
€2.247,41 €1.857,36
 
Handle for- and rear window lock
Handle for- and rear window lock
€35,58 €29,40
 
Scharmüller Manual hitch W255 S32 K1, coupling pin 31 mm, 2000 kg, 92 kN
Scharmüller
Manual hitch W255 S32 K1, coupling pin 31 mm, 2000 kg, 92 kN
Rail width: 255 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€732,74 €605,57
 
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
8%
Sauermann
Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Supplied with individual certification Ø 30 mm pin
€1.119,87 €925,51 €1.030,28 €851,47
 
HELLA Bulb R10W 12 V, 10 W, BA15s - 10 pieces
HELLA
Bulb R10W 12 V, 10 W, BA15s - 10 pieces
Type: R10W | Voltage (V): 12 | Socket: BA15s | Bulb: Konventionell | Power (watt...
€18,94 €15,65
 
Koppelingslamellenpakket Case IH, New Holland
8%
Koppelingslamellenpakket Case IH, New Holland
€206,88 €170,98 €190,33 €157,30
 
MAHLE Alternator 14 V / 120 A, flange 81 mm, pulley-Ø 67 mm
40%
MAHLE
Alternator 14 V / 120 A, flange 81 mm, pulley-Ø 67 mm
Mounting hole Ø / R (mm): 8,2 / 86,0 | Pulley Ø (mm): 67.0 | Charging current (A...
€515,34 €425,90 €308,66 €255,09
 
Filter dryer Ø 63,5 mm, 152 mm, connection thread M/F
8%
Filter dryer Ø 63,5 mm, 152 mm, connection thread M/F
Weight (g): 666 | Dimensions (mm): - | Outer Ø (mm): 63,5 | Material: Steel | Th...
€51,24 €42,35 €47,14 €38,96
 
SANDEN Aircon compressor 12 V, pulley Ø 119 mm, 8 grooves, 135 ccm oil
8%
SANDEN
Aircon compressor 12 V, pulley Ø 119 mm, 8 grooves, 135 ccm oil
No. of grooves: 8 | Fixing: EM | Pulley Ø (mm): 119 | Nominal voltage (V): 12 | ...
€510,75 €422,11 €469,89 €388,34
 
Door contact switch 12 V / 24 V, continuous load 2 A
Door contact switch 12 V / 24 V, continuous load 2 A
Version: 12 V / 24 V continuous load 2 A
€37,25 €30,79
 
Alternator 14 V / 120 A Case IH MXM 120-190, New Holland TM115-TM190
8%
Alternator 14 V / 120 A Case IH MXM 120-190, New Holland TM115-TM190
Pulley Ø (mm): 67.0 | Charging current (A): 120 | Belt width (mm) / type: PV x 8...
€327,11 €270,34 €300,94 €248,71
 
Torsion damper 14 teeth, profile 35 x 40 Case IH, New Holland, Steyr
8%
Torsion damper 14 teeth, profile 35 x 40 Case IH, New Holland, Steyr
Tooth profile: 35X40 | Number of teeth: 14
€555,96 €459,47 €511,48 €422,71
 
Cylinder hydraulic steering Case IH, New Holland
8%
Cylinder hydraulic steering Case IH, New Holland
€454,49 €375,61 €418,13 €345,56
 
Ball joint taper 24 - 26 mm, length 100 mm, M20 x 1,5, M24 x 1,5
8%
Ball joint taper 24 - 26 mm, length 100 mm, M20 x 1,5, M24 x 1,5
A: 100 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 ...
€59,96 €49,55 €55,16 €45,59
 
Ball joint 390 mm, M20 x 1,5, 30 mm, taper 26 - 28 mm
8%
Ball joint 390 mm, M20 x 1,5, 30 mm, taper 26 - 28 mm
A: 390 mm. C: M20 x 1,5 mm. D: 30 mm. E: 26 mm. F: 28 mm. Taper: 26 - 28 mm.
€89,19 €73,71 €82,05 €67,81
 
LUK Torsion damper 14 teeth, 35X40 Case IH, Steyr, New Holland
8%
LUK
Torsion damper 14 teeth, 35X40 Case IH, Steyr, New Holland
Number of teeth: 14. Tooth profile: 35x40.
€650,89 €537,93 €598,82 €494,89
 
Optibelt Multi-rib belt 8 ribs New Holland TM120-TM190, Case IH MXM 120-190
8%
Optibelt
Multi-rib belt 8 ribs New Holland TM120-TM190, Case IH MXM 120-190
€80,68 €66,68 €74,23 €61,34
 
Exhaust pipe without protective grille Case IH, New Holland
8%
Exhaust pipe without protective grille Case IH, New Holland
€358,41 €296,21 €329,74 €272,51
 
GRAMMER Tractor seat Maximo Evolution Dynamic Case CVX, Steyr, New Holland
7%
GRAMMER
Tractor seat Maximo Evolution Dynamic Case CVX, Steyr, New Holland
To fit: Case IH, New Holland, CVX. Suspension: Air suspension. Upholstery type: ...
€7.096,01 €5.864,47 €6.578,33 €5.436,64
 
Seal kit outer lift cylinder Fiat, Ford, New Holland, Case IH
8%
Seal kit outer lift cylinder Fiat, Ford, New Holland, Case IH
€36,62 €30,26 €33,69 €27,84
 
Stabilus Gas strut rear window 200 N, 585,5 mm, stroke 252,5 mm
Stabilus
Gas strut rear window 200 N, 585,5 mm, stroke 252,5 mm
Passend für: Case IH Heckscheibe
€35,81 €29,60
 
Torsion damper Case IH MXM 120 - 155, New Holland TM115 - TM165
8%
Torsion damper Case IH MXM 120 - 155, New Holland TM115 - TM165
Additional information: Made in Germany
€526,14 €434,83 €484,05 €400,04
 
Speed sensor crankshaft engine, with connection cable and plug
8%
Speed sensor crankshaft engine, with connection cable and plug
Version: Speed sensor (crankshaft) Connection cable with plug connection
€99,03 €81,84 €91,11 €75,30
 
MAHLE Starter motor 12 V, 3,1 kW, 10 teeth, clockwise, mounting Ø 92,0 mm
40%
MAHLE
Starter motor 12 V, 3,1 kW, 10 teeth, clockwise, mounting Ø 92,0 mm
€530,00 €438,02 €317,44 €262,35
 
Ball joint taper 26 - 28 mm, length 100 mm, M22 x 1,5, 1 1/8" x 12
8%
Ball joint taper 26 - 28 mm, length 100 mm, M22 x 1,5, 1 1/8" x 12
A: 100 mm. C: M20 x 1,5 mm. D: 1 1/8" x 12 mm. E: 26 mm. F: 28 mm. Taper: 26 - 2...
€122,84 €101,52 €113,01 €93,40
 
Ball joint 106 mm, taper 20 - 22 mm, M18 x 1,5, M24 x 1,5
8%
Ball joint 106 mm, taper 20 - 22 mm, M18 x 1,5, M24 x 1,5
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 ...
€60,06 €49,64 €55,26 €45,67
 
Ball joint 120 mm, C M20 x 1,5, D M24 x 1,5, taper 24 - 26 mm
8%
Ball joint 120 mm, C M20 x 1,5, D M24 x 1,5, taper 24 - 26 mm
A: 120 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 ...
€59,82 €49,44 €55,03 €45,48
 
Brake disc Ø 214,7 mm, thickness 7 mm, 52 teeth
8%
Brake disc Ø 214,7 mm, thickness 7 mm, 52 teeth
€121,59 €100,49 €111,86 €92,45
 
MAHLE Fan clutch Ø 152 mm Case IH, New Holland
40%
MAHLE
Fan clutch Ø 152 mm Case IH, New Holland
Ø: 204 mm.
€949,67 €784,85 €568,79 €470,08
 
Borg Warner Fan clutch Case IH MXM 120-190, New Holland TM120-TM190
16%
Borg Warner
Fan clutch Case IH MXM 120-190, New Holland TM120-TM190
To fit: Case IH, New Holland.
€682,40 €563,97 €574,04 €474,41
 
Thermostat Ø 54 mm, 82 °C
Thermostat Ø 54 mm, 82 °C
€20,96 €17,32
 
V-belt tensioner Ø 74 mm, 39,25 mm wide, 20,3 Nm John Deere, Case IH
8%
V-belt tensioner Ø 74 mm, 39,25 mm wide, 20,3 Nm John Deere, Case IH
€170,39 €140,82 €156,76 €129,55
 
V-belt tensioner Ø 74 mm, width 39,5 mm
8%
V-belt tensioner Ø 74 mm, width 39,5 mm
Outer Ø: 74 mm. Width: 39,5 mm.
€192,27 €158,90 €176,89 €146,19
 
Showing 49 - 96 of 239

Case IH MXM 155 parts for driveline, steering and cab

A rattle in the driveline at idle, play in the steering or a hitch that clunks: these turn up on a Case IH MXM 155 with plenty of hours behind it. This page lists more than 250 replacement parts for the MXM 155, from GRANIT, Scharmüller, GRAMMER, ROCKINGER, PROBOSS and others.

Steering

Ball joints and a steering sensor are available for the MXM 155. To check a ball joint, grab the track rod with the wheels on the ground and move it firmly by hand. Any play you can feel or hear in the joint means it should be replaced, and if both sides are the same age it makes sense to do them together.

Driveline and engine

The torsion damper sits between the engine and the transmission and absorbs vibration. If you hear a rattle at idle that disappears when you press the clutch or engage the PTO, the torsion damper is a likely suspect. Engine parts include a starter motor, a fan clutch, a seal kit and an exhaust manifold gasket.

Hitching and the cab

  • Drawbars, a Piton Fix and a top drawbar
  • Height adjustable adapter plates
  • Tractor seats, such as the air suspended Maximo Dynamic and a PROBOSS seat
  • Gas struts, for example for the rear window
  • A tank cap

Matching parts to your MXM

The type plate confirms that the tractor is an MXM 155. Across the MXM series many parts look identical while their dimensions differ. Compare the reference number on the removed part with the details listed for the item, particularly for a torsion damper or a ball joint.

Fan clutch and starter

The fan clutch lets the fan turn according to engine temperature. With the engine cold and stopped, spin the fan by hand. It should offer some resistance and must not rattle or leak oil. If it spins as freely as a loose wheel, the clutch no longer grips. If you suspect the starter motor, check the battery, its terminals and the earth cable first, as they are often the real reason for slow cranking.

A seal kit contains the rings and gaskets needed for a complete repair. Always fit the whole kit, even if an old ring still looks fine, because aged seals harden and rarely seal again once disturbed.

More from the MXM series

The Case IH MXM 190 and the Case IH MXM 130 each have a dedicated page with the parts that fit them. All other Case IH tractors are collected at Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart