Menu
EUR

Case IH MXM 155 tractor parts & technical data

There is always something to replace on a Case IH MXM 155. This page lists more than 250 parts for the MXM series, such as trailer couplings and electrics.

237 parts found for Case IH MXM 155
Show:
GRANIT Gasket oil return line turbocharger
GRANIT
Gasket oil return line turbocharger
€4,33 €3,58
 
GRAMMER Tractor seat Maximo Evolution Dynamic Case CVX, Steyr, New Holland
5%
GRAMMER
Tractor seat Maximo Evolution Dynamic Case CVX, Steyr, New Holland
To fit: Case IH, New Holland, CVX. Suspension: Air suspension. Upholstery type: ...
€6.800,20 €5.620,00 €6.460,15 €5.338,97
 
Gas strut rear window 200 N, 585 mm
Gas strut rear window 200 N, 585 mm
Newtons: 200. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear screen. For...
€32,10 €26,53
 
GRANIT Handle linkage Case IH, Fiat, Ford, New Holland
5%
GRANIT
Handle linkage Case IH, Fiat, Ford, New Holland
€141,52 €116,96 €134,40 €111,07
 
Scharmüller Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
12%
Scharmüller
Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 ...
€1.379,23 €1.139,86 €1.219,75 €1.008,06
 
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
21%
Walterscheid
Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€2.361,86 €1.951,95 €1.855,70 €1.533,64
 
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
18%
Walterscheid
Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 ...
€1.594,71 €1.317,94 €1.315,60 €1.087,27
 
GRANIT Sensor power take-off speed, connection cable with plug
10%
GRANIT
Sensor power take-off speed, connection cable with plug
Version: PTO shaft (speed), PTO speed, Connection cable with plug.
€90,92 €75,14 €82,25 €67,98
 
Potentiometer transmission for electronic control unit with connector
5%
Potentiometer transmission for electronic control unit with connector
Version: For electronic control unit, Connection cable with plug.
€145,39 €120,16 €138,10 €114,13
 
HELLA Multifunction relay N/O-contact 12 V, 40 A, 4-pin, 6,3 mm
HELLA
Multifunction relay N/O-contact 12 V, 40 A, 4-pin, 6,3 mm
Version: 12 V / 40 A, Without bracket, 4-pin, blade terminal 6.3 mm.
€18,15 €15,00
 
CARLISLE Internal plate PTO clutch 1,8 mm, 91 - 140 mm, 32 teeth
5%
CARLISLE
Internal plate PTO clutch 1,8 mm, 91 - 140 mm, 32 teeth
Version: Thickness: 1.8 mm Inner: 91 mm Outer: 140 mm 32 teeth
€25,24 €20,86 €23,95 €19,79
 
GRANIT External plate 4 WD 1,5 mm, inner 100 mm, outer 152 mm, 6 teeth
5%
GRANIT
External plate 4 WD 1,5 mm, inner 100 mm, outer 152 mm, 6 teeth
Version: Thickness: 1.5 mm Inner: 100 mm Outer: 152 mm 6 teeth
€8,58 €7,09 €8,15 €6,74
 
WAECO PAG-compressor oil ISO 46, R134a - 250 ml can
WAECO
PAG-compressor oil ISO 46, R134a - 250 ml can
€23,95 €19,79
 
SANDEN Aircon compressor 12 V, pulley Ø 119 mm, 8 grooves, 200 ccm oil
5%
SANDEN
Aircon compressor 12 V, pulley Ø 119 mm, 8 grooves, 200 ccm oil
Suitable oil: SP 10 | Pulley Ø (mm): 119 | Refrigerant: R 134a | Nominal voltage...
€717,65 €593,10 €681,75 €563,43
 
GRANIT Door contact switch 12 V / 24 V, continuous load 2 A
GRANIT
Door contact switch 12 V / 24 V, continuous load 2 A
Version: 12 V / 24 V continuous load 2 A
€35,70 €29,50
 
PROBOSS Seat AS3520 air suspended 520 mm, 12 V IHC, Steyr, New Holland
PROBOSS
Seat AS3520 air suspended 520 mm, 12 V IHC, Steyr, New Holland
- Air suspension with 12V compressor - Fore/aft isolator - Continuous height adj...
€1.742,40 €1.440,00
 
GRANIT Compressor John Deere, New Holland, Case IH, Fiat, Ford
5%
GRANIT
Compressor John Deere, New Holland, Case IH, Fiat, Ford
€1.350,38 €1.116,02 €1.282,85 €1.060,21
 
GRANIT Sealing ring hand brake brake piston 329,6 x 336,4 x 3,4 mm
5%
GRANIT
Sealing ring hand brake brake piston 329,6 x 336,4 x 3,4 mm
€60,42 €49,93 €57,35 €47,40
 
Vibration damper Case IH Farmall 85C-115C, Steyr Profi 6125, 6140
5%
Vibration damper Case IH Farmall 85C-115C, Steyr Profi 6125, 6140
€104,75 €86,57 €99,50 €82,23
 
GRANIT Valve cover gasket engine BSD 666, 675TA
GRANIT
Valve cover gasket engine BSD 666, 675TA
€17,10 €14,13
 
Crankshaft seal rear Ø 122 x 141 x 13 mm Case IH, New Holland
5%
Crankshaft seal rear Ø 122 x 141 x 13 mm Case IH, New Holland
Outer Ø: 142 mm. Width: 10 / 15 mm. Inner Ø: 122 mm. Material: FPM (fluoro rubbe...
€60,08 €49,65 €57,00 €47,11
 
Cylinder head gasket engine 675 TA Ford, Case IH, Fiat, New Holland
5%
Cylinder head gasket engine 675 TA Ford, Case IH, Fiat, New Holland
€138,02 €114,07 €131,10 €108,35
 
Showing 73 - 96 of 237

Case IH MXM 155 parts for driveline, steering and cab

A rattle in the driveline at idle, play in the steering or a hitch that clunks: these turn up on a Case IH MXM 155 with plenty of hours behind it. This page lists more than 250 replacement parts for the MXM 155, from GRANIT, Scharmüller, GRAMMER, ROCKINGER, PROBOSS and others.

Steering

Ball joints and a steering sensor are available for the MXM 155. To check a ball joint, grab the track rod with the wheels on the ground and move it firmly by hand. Any play you can feel or hear in the joint means it should be replaced, and if both sides are the same age it makes sense to do them together.

Driveline and engine

The torsion damper sits between the engine and the transmission and absorbs vibration. If you hear a rattle at idle that disappears when you press the clutch or engage the PTO, the torsion damper is a likely suspect. Engine parts include a starter motor, a fan clutch, a seal kit and an exhaust manifold gasket.

Hitching and the cab

  • Drawbars, a Piton Fix and a top drawbar
  • Height adjustable adapter plates
  • Tractor seats, such as the air suspended Maximo Dynamic and a PROBOSS seat
  • Gas struts, for example for the rear window
  • A tank cap

Matching parts to your MXM

The type plate confirms that the tractor is an MXM 155. Across the MXM series many parts look identical while their dimensions differ. Compare the reference number on the removed part with the details listed for the item, particularly for a torsion damper or a ball joint.

Fan clutch and starter

The fan clutch lets the fan turn according to engine temperature. With the engine cold and stopped, spin the fan by hand. It should offer some resistance and must not rattle or leak oil. If it spins as freely as a loose wheel, the clutch no longer grips. If you suspect the starter motor, check the battery, its terminals and the earth cable first, as they are often the real reason for slow cranking.

A seal kit contains the rings and gaskets needed for a complete repair. Always fit the whole kit, even if an old ring still looks fine, because aged seals harden and rarely seal again once disturbed.

More from the MXM series

The Case IH MXM 190 and the Case IH MXM 130 each have a dedicated page with the parts that fit them. All other Case IH tractors are collected at Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart