Menu
EUR

Tractor parts John Deere 1040

Looking for parts for your John Deere 1040 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

506 parts found for John Deere 1040
Show:
Headlight right 12 V, 45/40 W R2, dipped beam/main beam, attachment
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. Installation location: Right. Nominal voltage: 12 V. Light function: With dipped beam, with full be... More
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. Installation locati...
€132,41 €109,43 €120,50 €99,59
You save 9%
HELLA Rear light 158 x 64 x 51 mm, 12 V, left, P21W, R10W
HELLA
Bulb: P21W, R10W. Width: 158 mm. Form: Rectangular. Height: 64 mm. Hole spacing: 45 mm. Dimensions W x H x D: 158 x 64 x 51 mm. Depth: 51 mm. Fixing: ... More
Bulb: P21W, R10W. Width: 158 mm. Form: Rectangular. Height: 64 mm. Hol...
€35,50 €29,34
GRANIT Sensor 1-pin, 1/8 inch NPT conical
GRANIT
Version: 1-pin. Thread: 1/8” NPT, tapered. More
Version: 1-pin. Thread: 1/8” NPT, tapered.
€10,95 €9,05
Tube vertical 1050 mm, inner-Ø 75 mm, exhaust Ø 75 mm John Deere
To fit as: John Deere 820, 920, 1020, 1120, 830, 930, 1030, 1130, 1630, 840, 940, 1040, 1140, 1350, 1550, 1750, 1850, 1850N More
To fit as: John Deere 820, 920, 1020, 1120, 830, 930, 1030, 1130, 1630...
€66,00 €54,55
GRANIT Hose inner-Ø 8 mm, outer-Ø 15 mm, material thickness 3,5 mm - 1 meter
€7,70 €6,36
Water pump without belt pulley and gasket John Deere Engine 940-5500
To fit as: John Deere 840, 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2140, 1350, 1550, 1750, 1850, 2250, 2450, 2650, 2850, 5300, 5400, 5500 More
To fit as: John Deere 840, 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2...
€143,97 €118,98 €131,00 €108,26
You save 9%
GRANIT Feed pump 2 hole, 45 mm, flange 30 mm, thread 10x1 John Deere
GRANIT
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 830, 930, 1030, 1130, 1630, 1830, 2030, 2130, 3030, 3130, 840, 940, 1040, 1140, 18... More
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 83...
€35,24 €29,12 €32,00 €26,45
You save 9%
HELLA Bulb R10W 12 V, 10 W, BA15s - 10 pieces
HELLA
Type: R10W | Voltage (V): 12 | Socket: BA15s | Bulb: Konventionell | Power (watts): 10 More
Type: R10W | Voltage (V): 12 | Socket: BA15s | Bulb: Konventionell | P...
€15,60 €12,89
HELLA Lens indicator/position light P21W/C5W, with screws - 2 pieces
HELLA
Version: With bolts | Light function: with position light, with turn signal light | Test mark: E1 42712, ECE | Bulb: P21W, C5W | Installation location... More
Version: With bolts | Light function: with position light, with turn s...
€27,25 €22,52
HELLA Indicator/position light 12 V, R21W/C5W, yellow/white - 2 pieces
HELLA
Bulb: 12V5WS / C5W 12V21WK / R21W | Version: For front mounting, horizontal, yellow indicator light, white position light, with 2 holes for M4 fixing ... More
Bulb: 12V5WS / C5W 12V21WK / R21W | Version: For front mounting, horiz...
€37,69 €31,15 €34,65 €28,64
You save 8%
GRANIT Clutch plate 300 22,3 x 25,8 mm, 15 splines, torsion damper
GRANIT
Dimensions (mm): 22.3 x 25.8, 15 grooves | Additional information: Made in Germany More
Dimensions (mm): 22.3 x 25.8, 15 grooves | Additional information: Mad...
€295,33 €244,07 €268,95 €222,27
You save 9%
GRANIT Alternator 14 V / 35 A, flange 56 mm, pulley Ø 68 mm, W-connection
GRANIT
Additional information: with W connection | Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Installation angle (°): l 60 | Charging current (A): 35 | Fo... More
Additional information: with W connection | Mounting L / d / R (mm): 5...
€122,13 €100,93 €111,15 €91,86
You save 9%
GRANIT As hydraulic pump John Deere 840 - 3650
€125,88 €104,03 €114,60 €94,71
You save 9%
HELLA Alternator 14 V / 85 A, without belt pulley, Fendt, John Deere
HELLA
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal v...
€429,84 €355,24 €331,15 €273,68
You save 23%
HELLA Alternator 14 V / 65 A, pulley Ø 82 mm, 1 groove, Fendt, John Deere
HELLA
Nominal values (V / A): 14 / 65 | No. of grooves: 1 | Charging current (A): 65 | Nominal voltage (V): 14 | Additional information: With pulley | Pulle... More
Nominal values (V / A): 14 / 65 | No. of grooves: 1 | Charging current...
€384,41 €317,69 €296,15 €244,75
You save 23%
HELLA Starter motor 12 V, 3 kW, 11 teeth, Ø 83 mm, clockwise
€824,78 €681,64 €635,45 €525,17
You save 23%
ZF Bearing ZF front axle 4472059051 Ø outer 64,29 mm, width 21,43 mm
€137,88 €113,95 €125,50 €103,72
You save 9%
GRANIT Track rod 908 mm, M14 x 1,5, taper 16,2 - 18,76 mm, M14 x 1,5
GRANIT
A: 908 mm. B: M14 x 1,5 mm. C: 16,2 - 18,76 mm. G: . D: M14 x 1,5 mm. E: 28 mm. F: 20,6 mm. More
A: 908 mm. B: M14 x 1,5 mm. C: 16,2 - 18,76 mm. G: . D: M14 x 1,5 mm. ...
€109,67 €90,64 €99,80 €82,48
You save 9%
LUK Pilot bearing 15 x 35 x 11 mm
LUK
Dimensions: 15 x 35 x 11 mm. More
Dimensions: 15 x 35 x 11 mm.
€35,00 €28,93
GRANIT Brake disc Ø 306 x 4,9 mm, 12 teeth John Deere 840-2040
€197,22 €162,99 €182,30 €150,66
You save 8%
GRANIT PTO shaft end piece 260 mm, 1 3/8" 21 splines, 1000 rpm. John Deere
GRANIT
Version: Length 260 mm, 1 3/8", 21 splines, 1000 rpm. More
Version: Length 260 mm, 1 3/8", 21 splines, 1000 rpm.
€266,62 €220,35 €242,70 €200,58
You save 9%
GRANIT Control lever 3de and 4de valve John Deere 830-3650
GRANIT
To fit as John Deere 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1740, 1750, 1830, 1840, 1850, 2030, 2040, 2130, 2... More
To fit as John Deere 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130,...
€98,18 €81,14 €89,35 €73,84
You save 9%
GRANIT Housing thread 7/8 inch John Deere 940-2850
GRANIT
Dimensions (mm): Thread = 7/8". More
Dimensions (mm): Thread = 7/8".
€252,40 €208,60 €229,75 €189,88
You save 9%
GRANIT Disc 41,7 x 60 x 2 mm John Deere 820-2140
GRANIT
Dimensions (mm): 41.7 x 60 x 2. More
Dimensions (mm): 41.7 x 60 x 2.
€5,35 €4,42
Showing 145 - 168 of 506

Parts for your John Deere 1040 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your John Deere 1040. We also offer the right parts for all other tractor types from John Deere. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your John Deere 1040. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your John Deere 1040. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer John Deere

John Deere is an American manufacturer of tractors and agricultural machinery. The headquarters is located in Moline, Illinois. The company originally started as a small blacksmith shop in Grand Detour. The first factory was established to produce a successful invention by John Deere: a steel self-cleaning plow. In Europe, John Deere has a tractor factory in Mannheim, Germany, and most harvesters come from Zweibrücken.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart