Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

John Deere 2520 tractor parts & technical data

Need electrics, steering and front axle parts or lighting for a John Deere 2520? The 2000 series has its own page here, with more than 140 parts on it.

144 parts found for John Deere 2520
Show:
Perkins Fuel filter outer-Ø 88 mm, inner-Ø 18 mm, height 72 mm
Perkins
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm. More
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm.
€20,09 €16,60
Oil pressure switch engine 1/8" NPT, 0,4 - 0,7 bar, open function
Version: Thread: 1/8" NPT, Measuring range: 0.4 - 0.7 bar, normally closed, Blade terminal. More
Version: Thread: 1/8" NPT, Measuring range: 0.4 - 0.7 bar, normally cl...
€11,46 €9,47
Sealing ring for injection nozzle Ø 13,6 x 9,3 mm, height 5,1 mm
Dimensions: Height 5.1, Outer Ø 13.6, Inner Ø 9.3 mm. Menke no.: 221605. More
Dimensions: Height 5.1, Outer Ø 13.6, Inner Ø 9.3 mm. Menke no.: 221...
€2,51 €2,08
BOSCH Micro relays 12 V / 30 - 20 A, 5-pin, 6,3 mm blade connection
BOSCH
Version: 12 V / 30 - 20 A Without bracket, 5-pin, blade terminal 6.3 mm More
Version: 12 V / 30 - 20 A Without bracket, 5-pin, blade terminal 6.3 m...
€11,20 €9,26
Gasket set, complete engine 4219D, 4239D/T, 4276 John Deere
€79,44 €65,65 €73,08 €60,40
You save 8%
Solenoid switch starter motor 12 V, 80 A, 3 schraubkontakt
Version: 12 V / 80 A, 3 screw connections. Additional information: Spulenwiderstand: 3.95-4.15 Temporärer Strom: 800 Amp. More
Version: 12 V / 80 A, 3 screw connections. Additional information: Spu...
€50,38 €41,64 €46,35 €38,31
You save 8%
Pilot bearing 17 x 40 x 12 mm
Dimensions (mm): 17 x 40 x 12 More
Dimensions (mm): 17 x 40 x 12
€6,69 €5,53
LED work lights spotlight 36 W, 3250 lm, Ø 111,6 mm, 12 / 24 V, round
Operating temperature (°C): -45 / +60 | Test mark: ECE R10 | Mounting type: Flush mounting | Material: Housing: aluminium, lens: plastic | Form: Roun... More
Operating temperature (°C): -45 / +60 | Test mark: ECE R10 | Mounting...
€45,45 €37,56 €41,81 €34,56
You save 8%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 82,5 mm, 246 mm, clockwise
€395,10 €326,53 €236,65 €195,58
You save 40%
Hydraulic pump 40 cm³/rpm. John Deere 1550-4030
Output volume: 40 cc/rev. More
Output volume: 40 cc/rev.
€2.136,82 €1.765,97 €1.965,87 €1.624,69
You save 8%
Thermostat Ø 54 mm, 82 °C
Ø (mm): 54 | Temperature (°C): 82 More
Ø (mm): 54 | Temperature (°C): 82
€18,75 €15,50
Starter motor 12 V, 2,7 kW, 10 teeth, Ø 82,5 mm, clockwise
€351,67 €290,64 €323,54 €267,39
You save 8%
HELLA Starter motor 12 V, 2,9 kW, 10 teeth, Ø 82 mm, clockwise
€560,36 €463,11 €431,75 €356,82
You save 23%
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise
€501,81 €414,72 €300,55 €248,39
You save 40%
Starter motor 12 V, 3,0 kW, 10 teeth clockwise, 259 mm
€315,70 €260,91 €290,44 €240,04
You save 8%
Push rod 230 mm John Deere Series 5E-6600, SE6200-SE6300
Dimensions: Length 230 mm. More
Dimensions: Length 230 mm.
€27,54 €22,76
Connecting rod bush Ø 30 mm John Deere Engine 3164-6303, Series 20-4030
€12,86 €10,63
Cylinder head gasket set upper engine 4219D-4276 John Deere
€58,18 €48,08 €53,53 €44,24
You save 8%
Start safety switch 9/16 inch UNF, standard open
Version: Make contact (contact function), Thread: 9/16" UNF, With screw connection. More
Version: Make contact (contact function), Thread: 9/16" UNF, With scre...
€40,67 €33,61 €37,42 €30,92
You save 8%
HELLA Bulb R10W 12 V, 10 W, BA15s - 10 pieces
HELLA
Type: R10W | Voltage (V): 12 | Socket: BA15s | Bulb: Konventionell | Power (watts): 10 More
Type: R10W | Voltage (V): 12 | Socket: BA15s | Bulb: Konventionell | P...
€18,94 €15,65
Valve hydraulic pump John Deere 1550 - 4960
€99,75 €82,44 €91,77 €75,84
You save 8%
Repair kit hydraulic pump John Deere 1550 - 4840
€154,42 €127,62 €142,07 €117,41
You save 8%
FEBI Feed pump 2 hole, 45 mm, flange 30 mm, thread 10x1 John Deere
FEBI
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 830, 930, 1030, 1130, 1630, 1830, 2030, 2130, 3030, 3130, 840, 940, 1040, 1140, 18... More
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 83...
€55,76 €46,08 €48,48 €40,07
You save 13%
Bush balancer shafts Ø 38,2 x 41,27 x 28 mm John Deere
Ø: Ø 38,2 x 41,27 x 28 mm. More
Ø: Ø 38,2 x 41,27 x 28 mm.
€5,78 €4,77
Oil pipe oil pump John Deere Series 11-6400, SE6100-SE6400
€36,93 €30,52 €33,98 €28,08
You save 8%
Shim rocker arm shaft Ø 20,65 x 29,46 x 0,5 mm John Deere
Dimensions: Ø 20.65 x 29.46 x 0.5 mm. More
Dimensions: Ø 20.65 x 29.46 x 0.5 mm.
€11,66 €9,64
Fuel tap John Deere 820-5820
€34,44 €28,46 €31,68 €26,19
You save 8%
Feed pump 2 bores, hole spacing 45 mm, flange 30 mm John Deere
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 30 mm. Connection thread: 10x1. Menke no.: 49517. More
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 30 mm. Con...
€35,24 €29,12 €32,42 €26,79
You save 8%
Crankshaft, 4-cylinder standard 38 mm piston pin John Deere 1640-2850
Notes: Please follow the instructions in the installation guide. Please complete the test instruction report contained therein, and return it to garan... More
Notes: Please follow the instructions in the installation guide. Pleas...
€1.528,91 €1.263,56 €1.456,60 €1.203,80
You save 5%
Piston set, complete Ø98 mm, combustion chamber 58,5 mm, John Deere
Dimensions: 3 rings, Ø 98 mm, Gudgeon pin Ø 30.2 x 81.3 mm, Combustion chamber Ø 58.5 mm, Combustion chamber depth 16.5 mm, O-ring in block. Descri... More
Dimensions: 3 rings, Ø 98 mm, Gudgeon pin Ø 30.2 x 81.3 mm, Combusti...
€185,56 €153,36 €170,72 €141,09
You save 8%
Starter switch with keys without nut, 12 V, blade terminal
Version: 12 V, with blade terminal, Function:, P: parking light, 0: off, 1: consumer, 2: start, Nut, 640R44342. More
Version: 12 V, with blade terminal, Function:, P: parking light, 0: of...
€75,38 €62,30 €69,35 €57,31
You save 8%
Micro relay changeover contact 12 V, 20 - 30 A, 5-pin, without bracket
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal 6.3 mm, With parallel resistor for suppressing inductive interference voltage peaks. More
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal 6.3 ...
€14,20 €11,74
Bearing race hydraulic pump John Deere 1550 - 4960
€125,88 €104,03 €115,81 €95,71
You save 8%
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise, oil-tight
€645,02 €533,07 €386,32 €319,28
You save 40%
Ball joint 322 mm, M16 x 1,5, 25,3 mm, taper 16,8 - 19,8 mm
A: 322 mm. C: M16 x 1,5 mm. D: 25,3 mm. E: 16,8 mm. F: 19,8 mm. Taper: 16,8 - 19,8 mm. More
A: 322 mm. C: M16 x 1,5 mm. D: 25,3 mm. E: 16,8 mm. F: 19,8 mm. Taper:...
€158,52 €131,01 €145,84 €120,53
You save 8%
Sealing ring 95,4 x 73,03 x 9,5 mm John Deere 3030-4455
Version: 95,4 x 73,03 x 9,5. More
Version: 95,4 x 73,03 x 9,5.
€37,92 €31,34
Cylinder head gasket John Deere Series 20-6400, SE6100-SE6400
€39,75 €32,85 €36,57 €30,22
You save 8%
Thermostat Ø 54 mm, 88 °C John Deere
Ø: 54 mm. Temperature: 88 °C. More
Ø: 54 mm. Temperature: 88 °C.
€20,85 €17,23
Cylinder head bolt 1/2" x 112 mm John Deere
Dimensions: 1/2" x 112 mm. More
Dimensions: 1/2" x 112 mm.
€8,91 €7,37
Electric feed pump John Deere
€41,33 €34,16 €38,02 €31,42
You save 8%
Oil pump John Deere 310-3650
Menke no.: 80754. More
Menke no.: 80754.
€119,00 €98,35 €109,48 €90,48
You save 8%
Injection nozzle John Deere 510-3350
To fit as: John Deere 510, 820, 920, 1020, 1120, 830, 930, 1030, 1130, 1630, 2030, 2130, 3130, 840, 940, 1040, 1140, 1640, 1840, 2040, 3040, 3140, 135... More
To fit as: John Deere 510, 820, 920, 1020, 1120, 830, 930, 1030, 1130,...
€79,67 €65,84 €73,30 €60,58
You save 8%
VICTOR REINZ Cylinder head gasket set engine 4219D, 4239D/T, 4276 John Deere
€128,16 €105,92 €117,91 €97,44
You save 8%
Showing 1 - 48 of 144

John Deere 2520 parts for starting, fuel supply and engine

When a John Deere 2520 refuses to start on a cold morning, the cause is usually in one of two places: the starting circuit or the fuel supply. This page covers both, along with pistons, bushes and gaskets for a full engine overhaul. Altogether there are more than 140 parts here from GRANIT, HELLA, VICTOR REINZ, MAHLE and MANN-FILTER that fit this tractor.

Starter motors, relays and switches

For the 2520 there are standard starter motors as well as gear reduction starters, plus separate solenoid switches. The circuit is covered by changeover relays and micro relays, and there is an oil pressure switch for the warning lamp on the dash.

Before swapping a starter motor, check the battery terminals and the earth cable to the block. A corroded connection gives exactly the same symptom as a worn starter: it clicks but will not turn over. Measure the voltage at the starter while cranking. If it drops sharply, the fault is in the wiring.

Fuel supply

The fuel system parts include a feed pump with its seal, a filter bowl, injection nozzles and a vented tank cap. A blocked vent in the cap creates a vacuum in the tank, and after a while the engine runs short of diesel even with a clean filter.

If you see water or dirt at the bottom of the filter bowl, drain it before it reaches the injectors. After replacing the filter or feed pump, bleed the system with the hand primer until diesel comes from the bleed screw without air bubbles.

If you suspect an injector, have it pop tested on a bench. Black smoke and a rough idle often point to a nozzle that dribbles after injection. Always fit new sealing washers under the injectors when they go back in.

Engine overhaul

Going further, you will find piston and liner sets, bushes, O-ring sets and gaskets, for example for the exhaust and the thermostat. Replace every gasket you disturb when opening up the engine, however good it still looks. A reused gasket is the classic cause of a leak that only shows up once everything is back together.

From type plate to the right part

The type plate on your John Deere carries the type and serial number. Faster still is the reference number on the old part, especially for starter motors and injection nozzles, which come in several versions. If another John Deere shares the shed with your 2520, its parts are on the John Deere parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart