Menu
EUR

John Deere 5500 tractor parts & technical data

Servicing a John Deere 5500? For this 5000 series tractor you can pick from more than 180 parts, among them electrics, lighting and trailer couplings.

180 parts found for John Deere 5500
Show:
HELLA Beacon KL 600 H1 orange, Ø 135 mm, push-on pin
HELLA
Mounting type: Pipe socket | Bulb: H1 | Power consumption (W): 55 | Bulbs included: Yes | Type: Halogen | Light function: Rotating | Colour: Yellow | ... More
Mounting type: Pipe socket | Bulb: H1 | Power consumption (W): 55 | Bu...
€145,20 €120,00 €139,85 €115,58
You save 4%
GRAMMER Tractor seat air suspended fabric, 480 mm, 12 V, MSG95G/721
GRAMMER
Comfort seat with air suspension and 12V compressor. Armrests, height adjustable and foldable. Weight adjustment, height adjustment 60 mm and Longitud... More
Comfort seat with air suspension and 12V compressor. Armrests, height ...
€1.051,50 €869,01
GRAMMER Tractor seat Maximo Comfort Plus MSG95A/731 John Deere
GRAMMER
To fit: John Deere. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 mm. Joystick c... More
To fit: John Deere. Suspension: Air suspension. Upholstery type: Fabri...
€2.381,22 €1.967,95
Ball for gear shift linkage Ø 12,7 mm, 1/2 inch, DIN 5401
Ø Dw: 12,7 mm. Ø Dw: 1/2 inches. DIN: DIN 5401. More
Ø Dw: 12,7 mm. Ø Dw: 1/2 inches. DIN: DIN 5401.
€4,26 €3,52
ROCKINGER Drawbar ball 80, rail width 330 mm, guide 32 mm, 4000 kg
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 105 kN. Colour: John Deere green. Description: Manual b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.256,32 €1.038,28 €967,98 €799,98
You save 23%
ROCKINGER Drawbar without sensor rail 330 mm, coupling pin 38 mm, JD green
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: JD green. Desc... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.013,32 €837,45 €780,74 €645,24
You save 23%
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, John Deere green
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 100 kN. Colour: JD green. Technical data: Kugelkupplung... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.485,41 €1.227,61 €1.194,48 €987,17
You save 20%
LUK Thrust bearing 65 x 100 x 18 mm
LUK
Dimensions (mm): 65 x 100 x 18 More
Dimensions (mm): 65 x 100 x 18
€109,09 €90,16 €100,36 €82,94
You save 8%
Pilot bearing 17 x 40 x 12 mm
Dimensions (mm): 17 x 40 x 12 More
Dimensions (mm): 17 x 40 x 12
€6,69 €5,53
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 82,5 mm, 246 mm, clockwise
€395,10 €326,53 €236,65 €195,58
You save 40%
Scharmüller Drawbar frame 390/25/32 K80, 4000 kg, 102,4 kN
Scharmüller
suitable for: Deutz-Fahr. Series: Agrotron Serie 7 TTV. Category: Bearing supports. Version: Standard. Colour: Black. D-value: 102,4 kN. Guide width: ... More
suitable for: Deutz-Fahr. Series: Agrotron Serie 7 TTV. Category: Bear...
€2.695,90 €2.228,02 €2.530,23 €2.091,10
You save 6%
Gear wheel final drive front axle 145 John Deere
€87,63 €72,42 €80,62 €66,63
You save 8%
KS Piston ring set 3 rings 3,13 / 2,39 / 3,47 mm, Ø 106,5 mm John Deere
LUK Clutch kit with thrust bearing John Deere 5300 - 5500
€1.313,54 €1.085,57 €1.258,46 €1.040,05
You save 4%
LUK Pilot bearing PTO shaft 45 x 75 x 16 mm Fendt, John Deere
€90,40 €74,71 €83,17 €68,73
You save 8%
Starter motor 12 V, 2,7 kW, 10 teeth, Ø 82,5 mm, clockwise
€351,67 €290,64 €323,54 €267,39
You save 8%
HELLA Starter motor 12 V, 2,9 kW, 10 teeth, Ø 82 mm, clockwise
€560,36 €463,11 €431,75 €356,82
You save 23%
LUK Thrust bearing 65 x 100 x 18 mm John Deere 5300 - 5500
LUK
Dimensions (mm): 65 x 100 x 18 More
Dimensions (mm): 65 x 100 x 18
€158,08 €130,64 €145,43 €120,19
You save 8%
Brake disc Ø 165 mm, 22 teeth, thickness 4,5 mm
€40,82 €33,74 €37,55 €31,04
You save 8%
FEBI Thermostat Ø 54 mm, 82 °C John Deere, Sabre
FEBI
To fit as: John Deere, Sabre. Tractor types: 4520, 4620, 3030, 3130 (from 235170), 4430, 4630, 3040, 3140, 3640, 4040S, 4240, 4240S, 4440, 4640, 4840,... More
To fit as: John Deere, Sabre. Tractor types: 4520, 4620, 3030, 3130 (f...
€24,08 €19,90 €11,17 €9,23
You save 54%
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise
€501,81 €414,72 €300,55 €248,39
You save 40%
Starter motor 12 V, 3,0 kW, 10 teeth clockwise, 259 mm
€315,70 €260,91 €290,44 €240,04
You save 8%
Axial joint with stop 176 mm, M20 x 1,5, M18 x 1,5, Ø 52 mm, Ø 35 mm
A: 176 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 25 °. Ø B: 52 mm. Ø E: 35 mm. More
A: 176 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 25 °. Ø B: 52 mm. Ø...
€74,26 €61,37 €68,32 €56,46
You save 8%
Track rod 198 mm, M12 x 1,25, taper 19,9 - 22,25 mm, line-Ø 48 mm
A: 198 mm. D: M12 x 1,25 mm. E: 19,9 mm. F: 22,25 mm. Taper: 19,9 - 22,25 mm. Tube Ø: 48 mm. More
A: 198 mm. D: M12 x 1,25 mm. E: 19,9 mm. F: 22,25 mm. Taper: 19,9 - 22...
€155,09 €128,17 €142,68 €117,92
You save 8%
Turbocharger John Deere 5300-5500, 6400
€2.126,87 €1.757,74 €1.956,72 €1.617,12
You save 8%
Push rod 230 mm John Deere Series 5E-6600, SE6200-SE6300
Dimensions: Length 230 mm. More
Dimensions: Length 230 mm.
€27,54 €22,76
LUK Clutch plate 280UKC 19 x 22 mm, 13 splines, John Deere 5300 - 5500
LUK
Material specifications: Sintered clutch lining | Dimensions (mm): 19 x 22 13 grooves More
Material specifications: Sintered clutch lining | Dimensions (mm): 19 ...
€225,63 €186,47 €207,58 €171,55
You save 8%
Clutch cable driving clutch 545 mm, sleeve length 385 mm, M10 John Deere
Sleeve length (mm): 385 | Cable length (mm): 545 | Thread: M10 More
Sleeve length (mm): 385 | Cable length (mm): 545 | Thread: M10
€44,61 €36,87 €41,04 €33,92
You save 8%
Pilot bearing 45 x 75 x 16 mm John Deere 5300 - 7530 PR
Dimensions (mm): 45 x 75 x 16 More
Dimensions (mm): 45 x 75 x 16
€24,59 €20,32
Ball joint 173 mm, M18 x 1,5, taper 19,9 - 22,3 mm
A: 173 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 19,9 mm. F: 22,3 mm. Taper: 19,9 - 22,3 mm. More
A: 173 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 19,9 mm. F: 22,3 mm. T...
€68,26 €56,41 €62,80 €51,90
You save 8%
O-ring oil pump 15,47 x 3,53 mm John Deere
Dimensions: 15.47 x 3.53 mm. More
Dimensions: 15.47 x 3.53 mm.
€5,15 €4,26
Bush balancer shafts Ø 38,2 x 41,27 x 28 mm John Deere
Ø: Ø 38,2 x 41,27 x 28 mm. More
Ø: Ø 38,2 x 41,27 x 28 mm.
€5,78 €4,77
Oil pipe oil pump John Deere Series 11-6400, SE6100-SE6400
€36,93 €30,52 €33,98 €28,08
You save 8%
Radiator hose, bottom right length 541 mm John Deere 5215-5500
€43,46 €35,92 €39,98 €33,04
You save 8%
Turbocharger John Deere 1850, 1950, 5300-5500, 6400
€1.877,74 €1.551,85 €1.799,47 €1.487,16
You save 4%
Filter dryer Ø 76 mm, 203 mm, connection thread #6 3/8 inch O-ring
Outer Ø (mm): 76 | Connection thread: #6 3 / 8 O-ring 16 16 | Material: 45CrMoV7 (chrome molybdenum vanadium air hardening steel) | Dimensions (mm): ... More
Outer Ø (mm): 76 | Connection thread: #6 3 / 8 O-ring 16 16 | Materia...
€41,34 €34,17 €38,03 €31,43
You save 8%
Double clutch DuT 280 34 x 40,5 mm, 12 splines John Deere
Dimensions (mm): 34 x 40.5, 12 grooves, 19 x 22.2, 13 grooves | Additional information: Made in Germany More
Dimensions (mm): 34 x 40.5, 12 grooves, 19 x 22.2, 13 grooves | Additi...
€1.426,78 €1.179,16 €1.362,64 €1.126,15
You save 4%
Thrust bearing 65 x 100 x 18 mm Claas, Fiat, John Deere
Dimensions (mm): 65 x 100 x 18 More
Dimensions (mm): 65 x 100 x 18
€48,22 €39,85 €44,36 €36,66
You save 8%
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise, oil-tight
€645,02 €533,07 €386,32 €319,28
You save 40%
Gear reduction starter 12 V, 3,2 kW, 10 teeth, Ø 82,5 mm, flange 32 mm
Cover
€12,74 €10,53
Shim rocker arm shaft Ø 20,65 x 29,46 x 0,5 mm John Deere
Dimensions: Ø 20.65 x 29.46 x 0.5 mm. More
Dimensions: Ø 20.65 x 29.46 x 0.5 mm.
€11,66 €9,64
Valve cover John Deere 2250-6400, SE6100-SE6400
€333,29 €275,45 €306,63 €253,41
You save 8%
Filler cap hydraulic block Ø 38 mm John Deere
Dimensions: Ø: 38 mm. More
Dimensions: Ø: 38 mm.
€33,98 €28,08
Turbocharger mounting kit John Deere 1950, 5500, 6400
Contents: 1x turbine inlet gasket, 4x copper-plated nuts, 4x stud bolts. More
Contents: 1x turbine inlet gasket, 4x copper-plated nuts, 4x stud bolt...
€88,21 €72,90 €81,15 €67,07
You save 8%
Cylinder head bolt 1/2" x 112 mm John Deere
Dimensions: 1/2" x 112 mm. More
Dimensions: 1/2" x 112 mm.
€8,91 €7,37
Electric feed pump John Deere
€41,33 €34,16 €38,02 €31,42
You save 8%
Showing 1 - 48 of 180

John Deere 5500 tractor parts

Starter trouble first

A John Deere 5500 from the 5000 range is the tractor many farms reach for whenever the big machine is too much. It gets started many times a day and does a lot of short runs, and that shows in the parts that eventually need replacing. There are more than 180 John Deere 5500 parts on this page, from GRANIT, HELLA, VICTOR REINZ, LUK and ROCKINGER.

For starting there are standard starter motors and gear reduction starters. Before you replace a starter, check the battery terminals, the earth strap to the block and the heavy cable to the starter. A corroded or loose earth gives exactly the same symptoms as a worn starter: just a click, or an engine that turns over slowly and unevenly. Measure the voltage at the starter itself while cranking. If it drops a long way even though the battery is fully charged, the problem is in the cables, and a new starter would only mask it for a while.

Engine, cooling and clutch parts

  • Thermostats, water pumps and hoses for the cooling circuit
  • Gaskets such as the one for the turbocharger oil return line, plus seals for the fuel tank sender
  • O-rings, for instance for the master brake cylinder
  • Crankshaft bushes
  • Thrust bearings and pilot bearings for the clutch

If the tractor is being split for clutch work, change the pilot bearing at the same time. It is a small part, but if it seizes later you will be splitting the whole tractor again. On a thermostat, look for the opening temperature, which is usually stamped on the part.

A water pump usually announces its end with a drip of coolant from the small weep hole under the shaft, or with play when you rock the pulley. Replace it in good time and flush the cooling system while you are at it. Old hoses that are hard or cracked at the clamps can go in the same job.

Cab, hitch and getting the match right

For the cab there are gas struts for the windscreen or door, an air suspended tractor seat and beacons. For hitching, ball drawbars mount on the rail at the back of the tractor.

To be sure a part fits, first confirm on the type plate that the tractor is a 5500, as the 5000 range includes many models. The old part often carries a John Deere or supplier number that you can compare with the product details. For every other tractor from the brand, each with its own page, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart