Menu
EUR

John Deere 1550 tractor parts & technical data

More than 550 parts fit the John Deere 1550. From lighting and electrics to trailer couplings, everything is gathered here so you can skip the long search.

555 parts found for John Deere 1550
Show:
GRANIT Gas strut door or rear window 165 N, 500 mm John Deere, Case IH
GRANIT
suitable for: Tür- oder Heckscheibe. Newtons: 165. A: 500 mm. B: 245 mm. C: 8 mm. D: 8 mm. Form: 3. To fit: door or rear screen. More
suitable for: Tür- oder Heckscheibe. Newtons: 165. A: 500 mm. B: 245 ...
€36,65 €30,29 €33,15 €27,40
You save 10%
Frame
€17,20 €14,21
HELLA Reflector round orange Ø 60 mm, bore Ø 6,0 mm, screwed
HELLA
Colour: Yellow. Hole Ø: 6.0 mm. Form: Round. Total Ø: 60 mm. Material: Plastic. Depth: 7 mm. Fixing: Horizontal. Installation location: Left, right.... More
Colour: Yellow. Hole Ø: 6.0 mm. Form: Round. Total Ø: 60 mm. Materia...
€1,96 €1,62
HELLA Main headlight insert left and right 164 x 103 mm, H4, 12 / 24 V
HELLA
Bulb: 12V60/55W / H4. Width: 167 mm. Height: 107 mm. Dimensions W x H x D: 167 x 107 x 109 mm. Depth: 109 mm. Installation location: Left/right. Nomin... More
Bulb: 12V60/55W / H4. Width: 167 mm. Height: 107 mm. Dimensions W x H ...
€51,52 €42,58 €43,35 €35,83
You save 16%
GRANIT Relays changeover contact 12 V / 30 - 40 A, 5-pin, with holder
GRANIT
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal. More
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal.
€8,60 €7,11
GRANIT Sensor engine magnetic sensor - engine speed
GRANIT
Version: Magnetic sensor - engine speed. More
Version: Magnetic sensor - engine speed.
€76,15 €62,93
Alternator 14 V / 33 A, form B, flange 27,0 mm, pulley-Ø 80,0 mm
To fit as: Lindner, Massey Ferguson More
To fit as: Lindner, Massey Ferguson
€216,90 €179,26 €206,00 €170,25
You save 5%
Water pump without belt pulley and gasket John Deere Engine 940-5500
To fit as: John Deere 840, 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2140, 1350, 1550, 1750, 1850, 2250, 2450, 2650, 2850, 5300, 5400, 5500 More
To fit as: John Deere 840, 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2...
€144,86 €119,72 €131,00 €108,26
You save 10%
GRANIT Injection nozzle John Deere 510-3350
GRANIT
To fit as: John Deere 510, 820, 920, 1020, 1120, 830, 930, 1030, 1130, 1630, 2030, 2130, 3130, 840, 940, 1040, 1140, 1640, 1840, 2040, 3040, 3140, 135... More
To fit as: John Deere 510, 820, 920, 1020, 1120, 830, 930, 1030, 1130,...
€80,17 €66,26 €72,50 €59,92
You save 10%
FLEETGUARD Hydraulic oil filter HF35474
€65,77 €54,36 €59,50 €49,17
You save 10%
GRANIT Clutch plate 280 22,3 x 25,8 mm, 15 splines, MCC
GRANIT
Material specifications: MCC clutch lining | Additional information: Made in Germany | Dimensions (mm): 22.3 x 25.8, 15 grooves More
Material specifications: MCC clutch lining | Additional information: M...
€251,30 €207,69 €238,70 €197,27
You save 5%
Wabco Trailer control valve with drukbegrenzing 8 bar, M22 x 1,5, NW 10 mm
Wabco
Connection: M22 x 1.5 | To fit: Mercedes and others | Nominal width (mm): 10 | Working pressure (bar): 8 More
Connection: M22 x 1.5 | To fit: Mercedes and others | Nominal width (m...
€585,42 €483,82 €529,65 €437,73
You save 10%
KS Piston ring set 3 rings 3,13 / 2,39 / 3,47 mm, Ø 106,5 mm John Deere
External plate 2,3 mm, inner 99 mm, outer 143 mm, 10 teeth John Deere
Version: Thickness: 2.3 mm Inner: 99 mm Outer: 143 mm, 10 splines More
Version: Thickness: 2.3 mm Inner: 99 mm Outer: 143 mm, 10 splines
€24,95 €20,62
LUK Double clutch 280/225TGA3 35 x 38 mm, 23 splines John Deere
LUK
Flywheel dimension (mm): 56 | Dimensions (mm): 35 x 38 23 grooves More
Flywheel dimension (mm): 56 | Dimensions (mm): 35 x 38 23 grooves
€883,20 €729,92 €839,00 €693,39
You save 5%
Double clutch DoT 280 H 35 x 38 mm, 23 splines John Deere
Dimensions (mm): 35 x 38, 23 grooves | Flywheel dimension (mm): 56 | Additional information: Made in Germany More
Dimensions (mm): 35 x 38, 23 grooves | Flywheel dimension (mm): 56 | A...
€689,62 €569,93 €655,10 €541,41
You save 5%
GRANIT Release bearing complete with sleeve Ø 49 mm John Deere 820 - 1850
GRANIT
Dimensions (mm): Ø 49 More
Dimensions (mm): Ø 49
€104,79 €86,60 €99,55 €82,27
You save 5%
HELLA Alternator 14 V, 33 A Case IH, Deutz-Fahr, John Deere
HELLA
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal v...
€340,12 €281,09 €273,40 €225,95
You save 20%
FEBI Engine oil filter Ø 92,96 mm, height 150,88 mm, thread M92 x 2,5
€29,97 €24,77 €19,21 €15,88
You save 36%
FEBI Alternator 14 V / 33 A, form B, flange 27,0 mm, pulley-Ø 80,0 mm
FEBI
To fit as: Lindner, Massey Ferguson More
To fit as: Lindner, Massey Ferguson
€25,53 €21,10 €13,18 €10,89
You save 48%
MAHLE Starter motor 12 V, 2,7 kW, 10 teeth, clockwise, mounting Ø 82,5 mm
€454,09 €375,28 €283,80 €234,55
You save 38%
Track rod 330 mm, 1 1/8" x 12, taper 23,5 - 26,5 mm, M14 x 1,5
A: 300 - 500 mm. B: 1 1/8" x 12 mm. C: 23,5 - 26,5 mm. G: . D: M14 x 1,5 mm. E: 28 mm. F: 20,6 mm. More
A: 300 - 500 mm. B: 1 1/8" x 12 mm. C: 23,5 - 26,5 mm. G: . D: M14 x 1...
€177,86 €146,99 €168,95 €139,63
You save 5%
Track rod 515 mm, M28 x 1,5, taper 19,9 - 22,25 mm, line-Ø 40 mm
A: 515 mm. D: M28 x 1,5 mm. E: 19,9 mm. F: 22,25 mm. Taper: 19,9 - 22,25 mm. Tube Ø: 40 mm. More
A: 515 mm. D: M28 x 1,5 mm. E: 19,9 mm. F: 22,25 mm. Taper: 19,9 - 22,...
€145,68 €120,40 €138,35 €114,34
You save 5%
Showing 217 - 240 of 555

John Deere 1550 parts

More than 550 parts fit the John Deere 1550, enough to take care of a full service in one go, from the clutch to the headlights. Brands include GRANIT, HELLA, MAHLE, LUK and Wabco.

Clutch

For the clutch there are clutch plates with a torsion damper and single clutch pressure plates. Replace the plate and pressure plate together where you can. The tractor has to be split either way, and a new plate running against a worn pressure plate will not last. While it is apart, inspect the flywheel too: scoring or blue heat marks should be skimmed out before the new plate goes in.

Engine, cooling and electrics

  • Water pumps, plus seals for the lift pump and the coolant circuit
  • Exhaust gaskets and a lift housing gasket
  • O-rings, including one for the brake master cylinder
  • Starter motors and alternators
  • Left and right headlights

Coolant seeping from the weep hole on the water pump means the shaft seal has gone and the pump will not last much longer. Replace it as a unit and clean the gasket faces on the block thoroughly. Look over the belt and hoses at the same time, then refill with fresh coolant. Warm the engine up with the heater valve open and top up as the level drops. Headlights are available separately for left and right, so only the damaged side needs replacing.

Linkage, steering and air brakes

Lift arm bushes and washers take the play out of the rear linkage. On the steering side you can replace track rods and ball joints. Connector heads cover the air brake supply to a trailer, and gas struts hold the cab door or window where they should.

When changing a track rod, measure the old one first so the toe setting stays roughly where it was, then have the alignment checked, since wrong toe wears front tyres quickly.

Making sure it fits

First confirm on the data plate that the tractor is a 1550. Some parts are made for a group of John Deere models, such as a lift housing gasket that fits from the 820 up to the 3650 and a pressure plate for the 840 up to the 2650. The product details show this. Also compare the number on the old part, especially for the clutch, where the spline count and plate diameter have to match.

The 1550 is part of the 50 series. Two other tractors from that series have pages of their own:

For any other John Deere you look after, go to the overview of John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart