Menu
EUR

John Deere 1550 tractor parts & technical data

More than 550 parts fit the John Deere 1550. From lighting and electrics to trailer couplings, everything is gathered here so you can skip the long search.

555 parts found for John Deere 1550
Show:
Track rod 1345 mm, M18 x 1,5, 20 - 22 mm, 32 mm
5%
Track rod 1345 mm, M18 x 1,5, 20 - 22 mm, 32 mm
A: 1345 mm. B: M18 x 1,5 mm. C: 20 - 22 mm. G: . D: M24 x 1,5 mm. E: 32 mm.
€149,65 €123,68 €142,15 €117,48
 
Track rod 1391 mm, M24 x 1,5, 20 - 22 mm, 32 mm
5%
Track rod 1391 mm, M24 x 1,5, 20 - 22 mm, 32 mm
A: 1391 mm. B: M24 x 1,5 mm. C: 20 - 22 mm. G: . D: M18 x 1,5 mm. E: 32 mm.
€310,11 €256,29 €294,60 €243,47
 
GRANIT Universal joint 27 x 70 mm, maintenance-free
5%
GRANIT
Universal joint 27 x 70 mm, maintenance-free
A: 27 mm. B: 70 mm. Universal joint size: . Lubrication system: Maintenance-free...
€105,16 €86,91 €99,90 €82,56
 
Track rod 970 mm, M20 x 1,5, taper 16,2 - 18,75 mm
5%
Track rod 970 mm, M20 x 1,5, taper 16,2 - 18,75 mm
A: 970 mm. B: M20 x 1,5 mm. C: 16,2 - 18,75 mm. G: . D: M20 x 1,5 mm. E: 28 mm.
€368,69 €304,70 €350,25 €289,46
 
Brake band for hand brake John Deere 920-2850
5%
Brake band for hand brake John Deere 920-2850
€305,34 €252,35 €290,00 €239,67
 
GRANIT O-ring oil pump 15,47 x 3,53 mm John Deere
GRANIT
O-ring oil pump 15,47 x 3,53 mm John Deere
Dimensions: 15.47 x 3.53 mm.
€4,92 €4,07
 
GRANIT Outlet valve John Deere 1550-4050, 2040S-4040S
5%
GRANIT
Outlet valve John Deere 1550-4050, 2040S-4040S
€53,34 €44,08 €50,65 €41,86
 
GRANIT Clamp exhaust Ø 95 - 100 mm, width 19 mm John Deere
5%
GRANIT
Clamp exhaust Ø 95 - 100 mm, width 19 mm John Deere
Ø: 107 - 110 mm. Version: Ø 95 - 100 mm, Width 19 mm.
€75,71 €62,57 €71,90 €59,42
 
GRANIT Hose inner-Ø 8 mm, outer-Ø 15 mm, material thickness 3,5 mm
GRANIT
Hose inner-Ø 8 mm, outer-Ø 15 mm, material thickness 3,5 mm
Outer Ø: 15 mm. Inner Ø: 8 mm. Material thickness: 3,5 mm. Description: Ø 7.5 mm...
€7,70 €6,36
 
GRANIT Hose inner-Ø 5 mm, outer-Ø 12 mm, material thickness 3,5 mm
GRANIT
Hose inner-Ø 5 mm, outer-Ø 12 mm, material thickness 3,5 mm
Inner Ø: 5 mm. Outer Ø: 12 mm. Material thickness: 3,5 mm.
€6,20 €5,12
 
Water pump John Deere 3210-5820
5%
Water pump John Deere 3210-5820
€126,81 €104,80 €120,45 €99,55
 
Water pump with pulley Ø 125 mm John Deere
5%
Water pump with pulley Ø 125 mm John Deere
€187,65 €155,08 €178,25 €147,31
 
Filler cap hydraulic block Ø 38 mm John Deere
Filler cap hydraulic block Ø 38 mm John Deere
Dimensions: Ø: 38 mm.
€32,55 €26,90
 
GRANIT Feed pump 2 bores, hole spacing 45 mm, flange 30 mm John Deere
5%
GRANIT
Feed pump 2 bores, hole spacing 45 mm, flange 30 mm John Deere
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 30 mm. Connection th...
€33,77 €27,91 €32,00 €26,45
 
GRANIT Silencer lower 410 mm, inner-Ø 55 mm John Deere
5%
GRANIT
Silencer lower 410 mm, inner-Ø 55 mm John Deere
Version: Length: 410 mm, Inner Ø: 55 mm.
€285,79 €236,19 €271,50 €224,38
 
Injection nozzle John Deere 510-3350
5%
Injection nozzle John Deere 510-3350
Menke no.: 54121.
€89,89 €74,29 €85,35 €70,54
 
GRANIT Control valve steering valve John Deere 920-3650
5%
GRANIT
Control valve steering valve John Deere 920-3650
€32,92 €27,21 €31,25 €25,83
 
GRAMMER Seat Compacto COMFORT W MSG93/721, air suspended, fabric, 482 mm
5%
GRAMMER
Seat Compacto COMFORT W MSG93/721, air suspended, fabric, 482 mm
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Option...
€1.486,67 €1.228,65 €1.412,30 €1.167,19
 
Showing 121 - 144 of 555

John Deere 1550 parts

More than 550 parts fit the John Deere 1550, enough to take care of a full service in one go, from the clutch to the headlights. Brands include GRANIT, HELLA, MAHLE, LUK and Wabco.

Clutch

For the clutch there are clutch plates with a torsion damper and single clutch pressure plates. Replace the plate and pressure plate together where you can. The tractor has to be split either way, and a new plate running against a worn pressure plate will not last. While it is apart, inspect the flywheel too: scoring or blue heat marks should be skimmed out before the new plate goes in.

Engine, cooling and electrics

  • Water pumps, plus seals for the lift pump and the coolant circuit
  • Exhaust gaskets and a lift housing gasket
  • O-rings, including one for the brake master cylinder
  • Starter motors and alternators
  • Left and right headlights

Coolant seeping from the weep hole on the water pump means the shaft seal has gone and the pump will not last much longer. Replace it as a unit and clean the gasket faces on the block thoroughly. Look over the belt and hoses at the same time, then refill with fresh coolant. Warm the engine up with the heater valve open and top up as the level drops. Headlights are available separately for left and right, so only the damaged side needs replacing.

Linkage, steering and air brakes

Lift arm bushes and washers take the play out of the rear linkage. On the steering side you can replace track rods and ball joints. Connector heads cover the air brake supply to a trailer, and gas struts hold the cab door or window where they should.

When changing a track rod, measure the old one first so the toe setting stays roughly where it was, then have the alignment checked, since wrong toe wears front tyres quickly.

Making sure it fits

First confirm on the data plate that the tractor is a 1550. Some parts are made for a group of John Deere models, such as a lift housing gasket that fits from the 820 up to the 3650 and a pressure plate for the 840 up to the 2650. The product details show this. Also compare the number on the old part, especially for the clutch, where the spline count and plate diameter have to match.

The 1550 is part of the 50 series. Two other tractors from that series have pages of their own:

For any other John Deere you look after, go to the overview of John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart