Menu
EUR

Tractor parts John Deere 2140

Looking for parts for your John Deere 2140 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

519 parts found for John Deere 2140
Show:
Gear reduction starter 12 V, 3,4 kW, 10 teeth, 240 mm, clockwise
To fit as: John Deere, Renault More
To fit as: John Deere, Renault
€477,95 €395,00 €435,10 €359,59
You save 9%
FTE Clutch master cylinder Ø 23,81 mm, DOT4, gray cast iron John Deere
FTE
Material: Grey cast iron | Hole Ø (mm): 23.81 | Medium: DOT4 More
Material: Grey cast iron | Hole Ø (mm): 23.81 | Medium: DOT4
€267,39 €220,98 €243,40 €201,16
You save 9%
GRANIT Clutch slave cylinder Ø 38,1 mm, DOT 4 John Deere 2140 - 3140
GRANIT
Material: Grey cast iron | Hole Ø (mm): 38.1 More
Material: Grey cast iron | Hole Ø (mm): 38.1
€346,63 €286,47 €315,55 €260,79
You save 9%
GRANIT Internal plate PTO shaft 5,9 mm, inner 28,5 mm, outer 110 mm, 19 teeth
GRANIT
Version: Thickness: 5.9 mm Inner: 28.5 mm Outer: 110 mm 19 teeth More
Version: Thickness: 5.9 mm Inner: 28.5 mm Outer: 110 mm 19 teeth
€85,97 €71,05 €78,25 €64,67
You save 9%
GRANIT External plate thickness 1,35 mm, inner 99 mm, outer 155 mm
GRANIT
Version: thickness = 1,35 mm inner = 99 mm outer = 155 mm More
Version: thickness = 1,35 mm inner = 99 mm outer = 155 mm
€47,02 €38,86 €42,80 €35,37
You save 9%
GRANIT External plate thickness 2,3 mm, inner 168 mm, outer 195 mm, 6 teeth
GRANIT
Version: thickness = 2,3 mm inner = 168 mm outer = 195 mm 6 teeth More
Version: thickness = 2,3 mm inner = 168 mm outer = 195 mm 6 teeth
€34,41 €28,44 €31,30 €25,87
You save 9%
LUK Thrust bearing with housing 49,5 x 93,5 mm John Deere 820 - 3350
LUK
Dimensions (mm): 49.5 x 93.5 More
Dimensions (mm): 49.5 x 93.5
€162,26 €134,10 €147,70 €122,07
You save 9%
LUK Clutch plate 1 1/4 inch, 10 splines, sintered John Deere 2040S - 3640
LUK
Dimensions (inches): 1 1/4"" 10 grooves | Material specifications: Sintered clutch lining More
Dimensions (inches): 1 1/4"" 10 grooves | Material specifications: Sin...
€442,15 €365,41 €402,50 €332,64
You save 9%
LUK Clutch plate 295TZFA 22,3 x 25,8 mm, 15 splines, John Deere
LUK
Dimensions (mm): 22.3 x 25.8 15 grooves | Material specifications: Organic clutch lining More
Dimensions (mm): 22.3 x 25.8 15 grooves | Material specifications: Org...
€421,95 €348,72 €384,10 €317,44
You save 9%
Clutch plate 327, 25,8 x 32,1 mm, 10 splines, sintered
Dimensions (mm): 25.8 x 32.1, 10 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 25.8 x 32.1, 10 grooves | Material specifications: Si...
€289,79 €239,50 €263,80 €218,02
You save 9%
GRANIT Clutch plate 320 22,3 x 25,8 mm, 15 splines, torsion damper
GRANIT
Additional information: Made in Germany | Dimensions (mm): 22.3 x 25.8, 15 grooves More
Additional information: Made in Germany | Dimensions (mm): 22.3 x 25.8...
€439,41 €363,15 €400,00 €330,58
You save 9%
GRANIT Clutch plate 280 GTPZ 22,3 x 25,8 mm, 15 splines, torsion damper
GRANIT
Additional information: Made in Germany | Dimensions (mm): 22.3 x 25.8, 15 grooves More
Additional information: Made in Germany | Dimensions (mm): 22.3 x 25.8...
€285,23 €235,73 €259,65 €214,59
You save 9%
Single clutch refurbishment 41,5 x 44,8 mm, 27 key John Deere
Additional information: Made in Germany | Dimensions (mm): 41.5 x 44.8, 27 grooves | Flywheel dimension (mm): 21,6 More
Additional information: Made in Germany | Dimensions (mm): 41.5 x 44.8...
€595,24 €491,93 €541,90 €447,85
You save 9%
Single clutch G 320 N 41,5 x 44,8 mm, 27 splines John Deere
Flywheel dimension (mm): 21,6 | Additional information: Made in Germany | Dimensions (mm): 41.5 x 44.8, 27 grooves More
Flywheel dimension (mm): 21,6 | Additional information: Made in German...
€1.040,41 €859,84 €947,15 €782,77
You save 9%
Single clutch GN 300 41,5 x 44,8 mm, 27 splines John Deere
Dimensions (mm): 41.5 x 44.8, 27 grooves | Flywheel dimension (mm): 21,6 | Additional information: Made in Germany More
Dimensions (mm): 41.5 x 44.8, 27 grooves | Flywheel dimension (mm): 21...
€698,68 €577,42 €636,00 €525,62
You save 9%
Alternator 14 V / 120 A, flange 56 mm, Case IH, John Deere, Steyr
Installation angle (°): 0 | Pulley Ø (mm): - | Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Additional information: Dust-tight, with fan, with W con... More
Installation angle (°): 0 | Pulley Ø (mm): - | Mounting L / d / R (m...
€209,77 €173,36 €190,95 €157,81
You save 9%
Alternator 12 V / 95 A, pulley Ø 87 mm, Case IH, John Deere
Mounting L / d / R (mm): 82,0 / 8,2 / 86,0 | Nominal voltage (V): 12 | Pulley spacing (mm): 27,0 | Belt width (mm) / type: 15,2 | Form: B | Charging c... More
Mounting L / d / R (mm): 82,0 / 8,2 / 86,0 | Nominal voltage (V): 12 |...
€177,91 €147,03 €161,95 €133,84
You save 9%
MAHLE Gear reduction starter 12V 3,0 kW, 10 teeth clockwise
€599,49 €495,45 €359,00 €296,69
You save 40%
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise, oil-tight
€645,02 €533,07 €386,30 €319,26
You save 40%
GRANIT Starter motor with reduction 12 V, 4,0 kW, 10 teeth, mounting Ø 89,0 mm
€379,57 €313,69 €345,55 €285,58
You save 9%
GRANIT Starter motor 12 V, 2,7 kW, 10 teeth, Ø 82,5 mm, clockwise
€351,67 €290,64 €320,15 €264,59
You save 9%
Seal kit John Deere Series 40-3350
€110,53 €91,35 €100,60 €83,14
You save 9%
ZF Universal joint 30 x 83 mm, maintenance-free
€361,18 €298,50 €328,80 €271,74
You save 9%
GRANIT Ball joint taper 19,9 - 22,2 mm, M18 x 1,5, M24 x 1,5, 106 mm
GRANIT
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 19,9 mm. F: 22,2 mm. Taper: 19,9 - 22,2 mm. More
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 19,9 mm. F: 22,2 mm. T...
€38,19 €31,56 €34,75 €28,72
You save 9%
Showing 385 - 408 of 519

Parts for your John Deere 2140 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your John Deere 2140. We also offer the right parts for all other tractor types from John Deere. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your John Deere 2140. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your John Deere 2140. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer John Deere

John Deere is an American manufacturer of tractors and agricultural machinery. The headquarters is located in Moline, Illinois. The company originally started as a small blacksmith shop in Grand Detour. The first factory was established to produce a successful invention by John Deere: a steel self-cleaning plow. In Europe, John Deere has a tractor factory in Mannheim, Germany, and most harvesters come from Zweibrücken.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart