Menu
EUR

John Deere 3120 tractor parts & technical data

Keep your John Deere 3120 running with more than 250 parts that fit. Alongside electrics and lighting, this page offers a wide choice of classic tractor parts.

266 parts found for John Deere 3120
Show:
End control unit John Deere 830-3650
€362,65 €299,71 €344,50 €284,71
You save 5%
GRANIT Valve guide John Deere 840-6920S
GRANIT Valve parts set hydraulic pump John Deere 840-3650
GRANIT
Menke no.: 221647. More
Menke no.: 221647.
€17,00 €14,05
Bush set lift arm shaft Ø 7/8 inch, 42 x 20 x 28,2 mm John Deere
Dimensions: Ø = 7/8", 42 x 20 x 28.2 mm. More
Dimensions: Ø = 7/8", 42 x 20 x 28.2 mm.
€41,93 €34,65 €39,80 €32,89
You save 5%
Housing thread 1 inch John Deere 3120-3350
Dimensions: Thread = 1" mm. More
Dimensions: Thread = 1" mm.
€199,89 €165,20 €189,85 €156,90
You save 5%
GRANIT Spring hood John Deere 820-3640
GRANIT Headlight left 12 V, H4, T4W, fastening tube-Ø 24 mm
GRANIT
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2, 12V4WK/T4W. Installation location: Left. Protection class: -. Nominal voltage: 12 V. Test mark: -. ... More
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2, 12V4WK/T4W. Install...
€100,19 €82,80 €94,63 €78,21
You save 6%
MAHLE Alternator 14 V / 95 A, flange 56 mm, pulley-Ø 87 mm
MAHLE
Mounting L / d / R (mm): 56.0 / 8.2 / 86.0 | Installation angle (°): 0 | Charging current (A): 95 | Mounting hole Ø / R (mm): 8.2 / 86.0 | Additiona... More
Mounting L / d / R (mm): 56.0 / 8.2 / 86.0 | Installation angle (°): ...
€456,28 €377,09 €271,55 €224,42
You save 40%
GRANIT Internal plate PTO clutch 2,5 mm, inner 92,8 mm, outer 133,2 mm
GRANIT
Version: Thickness: 2.5 mm Inner: 92.8 mm Outer: 133.2 mm 45 splines More
Version: Thickness: 2.5 mm Inner: 92.8 mm Outer: 133.2 mm 45 splines
€32,90 €27,19
GRANIT As hydraulic pump John Deere 840 - 3650
€120,64 €99,70 €114,60 €94,71
You save 5%
Prestolite Alternator 12 V, 70 A, pulley Ø 69 mm, belt 6pK
€242,44 €200,36 €230,30 €190,33
You save 5%
FEBI Feed pump 2 hole, 45 mm, flange 30 mm, thread 10x1 John Deere
FEBI
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 830, 930, 1030, 1130, 1630, 1830, 2030, 2130, 3030, 3130, 840, 940, 1040, 1140, 18... More
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 83...
€55,76 €46,08 €48,48 €40,07
You save 13%
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise, oil-tight
€618,13 €510,85 €386,30 €319,26
You save 38%
GRANIT Starter motor 12 V, 2,7 kW, 10 teeth, Ø 82,5 mm, clockwise
€337,01 €278,52 €320,15 €264,59
You save 5%
GRANIT Starter motor 12 V, 3,0 kW, 10 teeth clockwise, 259 mm
€302,54 €250,03 €287,40 €237,52
You save 5%
HELLA Starter motor 12 V, 3,1 kW, 10 teeth, Ø 83 mm, clockwise
€650,46 €537,57 €522,95 €432,19
You save 20%
GRANIT Non-return valve brake cylinder John Deere 830-3650, combine 952-985
€67,06 €55,42 €63,70 €52,64
You save 5%
Brake plate foot brake Ø 307 mm, height 43,7 mm John Deere 3120
€227,96 €188,40 €216,55 €178,97
You save 5%
GRANIT Sealing ring 95,25 x 73,03 x 12,7 mm John Deere
GRANIT
Version: 95,25 x 73,03 x 12,7 mm. More
Version: 95,25 x 73,03 x 12,7 mm.
€28,25 €23,35
PTO shaft end piece 272 mm, 540 rpm. John Deere
Version: Length 272 mm, 540 rpm. More
Version: Length 272 mm, 540 rpm.
€176,02 €145,47 €167,20 €138,18
You save 5%
VICTOR REINZ Air receiver gasket John Deere
€3,52 €2,91
Showing 193 - 216 of 266

John Deere 3120 parts

An old John Deere 3120 tends to tell you about its electrics first: a slow crank on a cold morning or a charge light that stays on. The more than 250 new replacement parts on this page for the John Deere 3120 cover that and a good deal more, from GRANIT, HELLA, MAHLE, GRAMMER and LUK.

Matching by part number

John Deere part numbers are often included in the product description, so the number on your old part or in the workshop manual is the fastest way in. The identification plate confirms that the tractor is a 3120. When matching an alternator, compare the flange and pulley, and for a starter motor check the number of pinion teeth and the direction of rotation.

Parts for the 3120

  • Charging and starting: alternators, starter motors and gear reduction starters.
  • Fuel system: feed pumps with their seals, injector sealing rings and stop cables.
  • Engine and hydraulics: gaskets such as the lift housing gasket, and O-rings including the one for the master brake cylinder.
  • Clutch: single clutches.
  • Body and lights: headlights, bonnet springs, V-belts and push button switches.

Check the cables before the starter

Before replacing a starter motor, go over the battery, the earth strap and the terminals on the starter itself. A corroded earth connection produces exactly the same symptoms as a worn starter. Measure the voltage at the starter while cranking. If it drops a long way with a fully charged battery, the resistance is in the cabling. A gear reduction starter draws less current and is worth considering if the engine turns over reluctantly in winter.

Fuel, lights and belts

If the engine is hard to start after standing overnight or dies under load, look at the feed pump. A leaking seal lets air into the fuel system, and that shows up straight away at start-up. Replace the seal or the complete pump and bleed the system with the hand primer until fuel comes through without bubbles. If the engine no longer stops cleanly, the stop cable has often stretched or become stiff. Adjust a new cable so the stop lever travels all the way.

A headlight that glows dimly often has a poor earth or a tarnished reflector. Check V-belt tension with your thumb as well.

The 20 series

The John Deere 4520 from the same series has its own page too, so if you run both, look up each one separately. The full list of models is under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart