Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

John Deere 4050 tractor parts & technical data

Engine parts, lighting and trailer couplings are a few of the groups for the John Deere 4050. More than 250 parts for this 50 series tractor are listed here.

289 parts found for John Deere 4050
Show:
Fitting on injection nozzle for return line John Deere
Description: On injection nozzle, for return line. More
Description: On injection nozzle, for return line.
€17,39 €14,37
Hose elbow to the oil cooler inner-Ø 19 mm John Deere
€27,66 €22,86
Ball bearing fan drive Ø 25,4 x 47,6 x 70 mm John Deere
Ø: 25,4 x 47,6 x 70 mm. Shaft length: 123,5 mm. Description: For fan drive. More
Ø: 25,4 x 47,6 x 70 mm. Shaft length: 123,5 mm. Description: For fan ...
€95,49 €78,92 €87,85 €72,60
You save 8%
Radiator cap Ø 57 mm, height 52 mm
Neck Ø: 57 mm. Height: 52 mm. More
Neck Ø: 57 mm. Height: 52 mm.
€19,65 €16,24
Cover
€66,29 €54,79
Optibelt V-belt John Deere, New Holland, Case IH
Oil sump gasket cast iron sump engine 6466D John Deere
€68,18 €56,35 €62,73 €51,84
You save 8%
Crankshaft seal rear Ø 117,8 x 146,25 x 13,8 mm John Deere, Renault
Tank cap with ventilation metal tank, tank collar Ø 59 mm
Filler neck Ø: 59 mm. More
Filler neck Ø: 59 mm.
€12,63 €10,43
Oil cooler John Deere 4240, 4055-4455
€296,30 €244,88 €272,60 €225,29
You save 8%
GRAMMER Tractor seat Maximo Professional MSG95AL/731 John Deere
GRAMMER
To fit: John Deere. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 mm. Joystick c... More
To fit: John Deere. Suspension: Air suspension. Upholstery type: Fabri...
€2.687,01 €2.220,67
Replacement glass 271 x 191 mm, unheated, right / left John Deere SG 2
Dimensions: 271 x 191 mm. Version: Unheated. Installation location: Right/left. More
Dimensions: 271 x 191 mm. Version: Unheated. Installation location: Ri...
€36,44 €30,11
Shim hood John Deere
Start safety switch contact function, M 16 x 1
Version: Contact function, Thread: M 16 x 1, With screw connection. More
Version: Contact function, Thread: M 16 x 1, With screw connection.
€37,43 €30,94
Cover
€91,74 €75,82 €84,40 €69,75
You save 8%
HELLA Lens, left, 3 light functions, without number plate light
HELLA
Colour: Yellow, red. Installation location: Left. Test mark: E1 116, E1 53345, ECE. Light function: With indicator light, with brake light, with tail ... More
Colour: Yellow, red. Installation location: Left. Test mark: E1 116, E...
€23,51 €19,43
HELLA Rear light 170 x 75 x 62 mm, 12 / 24 V, indicator and brake light
HELLA
Bulb: P21W, R10W. Width: 170 mm. Form: Rectangular. Height: 75 mm. Hole spacing: 70 mm. Dimensions W x H x D: 170 x 75 x 62 mm. Depth: 62 mm. Fixing: ... More
Bulb: P21W, R10W. Width: 170 mm. Form: Rectangular. Height: 75 mm. Hol...
€43,49 €35,94
Radiacord hose Ø 19 / 25 mm, material thickness 3 mm John Deere
€29,99 €24,78
Seal feed pump John Deere Engine 920-6359
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 830, 930, 1030, 1130, 1630, 1830, 2030, 2130, 3030, 3130, 840, 940, 1040, 1140, 18... More
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 83...
€2,11 €1,75
Feed pump 2 hole, 45 mm, flange 30 mm, thread 10x1 John Deere
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 830, 930, 1030, 1130, 1630, 1830, 2030, 2130, 3030, 3130, 840, 940, 1040, 1140, 18... More
To fit as: John Deere 820, 920, 1020, 1120, 2020, 2120, 3020, 3120, 83...
€35,24 €29,12 €32,42 €26,79
You save 8%
Universal joint 35 x 96,8 mm, maintenance-free
A: 35 mm. B: 96,8 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 35 mm. B: 96,8 mm. Universal joint size: . Lubrication system: Main...
€117,48 €97,09 €108,08 €89,32
You save 8%
Starter ring gear Ø 385/415 mm, 129 teeth John Deere
Version: Ø 385/415, 129 teeth. More
Version: Ø 385/415, 129 teeth.
€101,76 €84,10 €93,62 €77,37
You save 8%
KS Piston set, complete Ø 106,5 mm, piston pin Ø 41,275 mm, John Deere
KS
Dimensions: 3 rings, Ø 106.5 mm, Gudgeon pin Ø 41.275 x 84.4 mm, Combustion chamber Ø 58.4 mm, Combustion chamber depth 19.65 mm, Ring carrier pist... More
Dimensions: 3 rings, Ø 106.5 mm, Gudgeon pin Ø 41.275 x 84.4 mm, Com...
€262,20 €216,69 €241,22 €199,36
You save 8%
Hand pump M16 x 1,5 John Deere, Deutz-Fahr
Version: M16 x 1.5. More
Version: M16 x 1.5.
€18,91 €15,63
VICTOR REINZ Air receiver gasket John Deere
€3,68 €3,04
VICTOR REINZ Seal kit upper John Deere 3030-6900
€257,74 €213,01 €237,12 €195,97
You save 8%
Oil cooler John Deere 1630-4050, 925-1075
€275,25 €227,48 €253,23 €209,28
You save 8%
Hand pump M16 x 1,5 Fendt, John Deere, Case IH, Fiat, Deutz-Fahr, Linde
Version: M16 x 1.5. Thread: M16 x 1.5. More
Version: M16 x 1.5. Thread: M16 x 1.5.
€14,44 €11,93
Hydraulic hose oil line to the turbocharger John Deere 2140-4050
Spacer cylinder liner Ø 120,8 x 125,3 x 0,10 mm John Deere
Ø: 120,8 x 125,3 x 0,10 mm. More
Ø: 120,8 x 125,3 x 0,10 mm.
€28,16 €23,27
Arm for throttle linkage John Deere Series 30-8970, SE6010-SE6610
Lever for throttle linkage John Deere Series 30-8970, SE6010-SE6610
Seal tank cap Ø 38,48 x 57,9 x 2,36 mm John Deere 820-4455
Dimensions: Ø 38.48 x 57.9 x 2.36 mm. More
Dimensions: Ø 38.48 x 57.9 x 2.36 mm.
€4,40 €3,64
Radiacord hose inner-Ø 19 mm, outer-Ø 25 mm, 1000 mm John Deere
Inner Ø: 19 mm. Outer Ø: 25 mm. Length: 1000 mm. Material thickness: 3 mm. More
Inner Ø: 19 mm. Outer Ø: 25 mm. Length: 1000 mm. Material thickness:...
€11,73 €9,69
Thermostat Ø 54 mm, 89 °C John Deere 4050, 4240, 4440
Ø: 54 mm. Temperature: 89 °C. More
Ø: 54 mm. Temperature: 89 °C.
€35,44 €29,29
Showing 145 - 192 of 289

John Deere 4050 parts

The John Deere 4050 has a loyal following among farmers who prefer to keep a proven tractor running. This page gathers more than 250 John Deere 4050 parts, made by GRANIT and by brands such as VICTOR REINZ, GRAMMER, HELLA and PROBOSS.

Where the parts go

  • Cooling: thermostats, thermostat gaskets and fan clutches.
  • Fuel system: feed pumps, hand pumps, seals for the feed pump and sealing rings for the injection nozzles.
  • Engine internals: piston sets, O-rings for the oil pump and crankshaft seals.
  • Valve gear: bushes and shims for the rocker arms.
  • Exhaust: gaskets for the manifold and silencer.
  • Cab and tank: air suspended tractor seats and lockable vented tank caps.

Workshop tips for the 4050

When a fan clutch no longer locks up, it shows itself as an engine that runs hot under heavy load while the radiator is clean. A quick check is to turn the fan blades yourself once the tractor has stood long enough to cool down. If it keeps turning with almost no resistance, or there is oil around the clutch, it is time for a new one.

When you replace an injection nozzle, always fit a new sealing ring underneath. A flattened old ring no longer seals, and combustion gases then blow past into the nozzle bore. After working on the fuel system, use the hand pump to bleed the system until clean, diesel without bubbles comes out at the bleed screws.

A blocked vent in the tank cap is an easy fault to miss. As fuel is drawn off, a vacuum builds in the tank and the feed pump struggles. The engine loses power after a while of work and recovers as soon as the cap is opened. A new vented tank cap cures it, and the lockable version also discourages diesel theft from the yard. For the valve gear, fit new bushes and shims together when the rocker shaft is apart, since worn bushes let the rockers tilt and wear the valve tips unevenly.

Confirming the right part

Check the type plate first to make sure you are working on a 4050. For gaskets, O-rings and thermostats, the part you remove is your best reference. Compare any reference number on it with the details on this page, and with a thermostat, note the opening temperature stamped on the old one.

Other models in the 50 series

John Deere placed the 4050 in its 50 series. The John Deere 1550 and the John Deere 1850 each have a separate page listing what fits those models. To browse the whole brand, use John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart