Menu
EUR

John Deere 5095M tractor parts & technical data

Sorting out the lights or the electrics on a John Deere 5095M? More than 200 parts for this 5M series tractor are listed here, trailer couplings among them.

234 parts found for John Deere 5095M
Show:
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.214,60 €1.003,80 €954,30 €788,68
You save 21%
LED main headlight 12/24 V, 168 x 107 x 81,5 mm, H4
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection: H4 | Power consumption (W): 55 | Light colour (K): 6000 | Housing material: Al... More
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection...
€119,54 €98,79 €113,55 €93,84
You save 5%
Axialgelenk 212 mm, C: M22 x 1,5, D: M22 x 1,5
A: 212 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. More
A: 212 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm.
€121,77 €100,64 €115,65 €95,58
You save 5%
GRANIT Thread insert for tank filler neck John Deere
GRANIT
Description: For tank filler neck. More
Description: For tank filler neck.
€19,70 €16,28
GRANIT Heating flange Fendt, John Deere
€250,78 €207,26 €238,20 €196,86
You save 5%
Connecting rod Ø 35 / 83 mm, length 308 mm John Deere
Dimensions: Ø 83 / 35, Length 308, Marking no. R500000 mm. More
Dimensions: Ø 83 / 35, Length 308, Marking no. R500000 mm.
€178,23 €147,30 €169,30 €139,92
You save 5%
GRANIT Cylinder head bolt 1/2" x 112 mm John Deere
GRANIT
Dimensions: 1/2" x 112 mm. More
Dimensions: 1/2" x 112 mm.
€8,55 €7,07
Replacement key lock number 14610 John Deere, Case IH
Locking number: 14610. Menke no.: 221631. More
Locking number: 14610. Menke no.: 221631.
€20,30 €16,78
Gas strut door- or rear window 130 N, 500 mm John Deere, Case IH
Newtons: 130. A: 500 mm. B: 250 mm. C: 8 mm. D: 8 mm. To fit: door or rear screen. Form: 6. Menke no.: 59787. More
Newtons: 130. A: 500 mm. B: 250 mm. C: 8 mm. D: 8 mm. To fit: door or ...
€34,00 €28,10
Split pin 14 mm x 68 mm
A: 14 mm. C: 68 mm. More
A: 14 mm. C: 68 mm.
€11,50 €9,50
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.675,85 €1.385,00 €1.382,55 €1.142,60
You save 18%
ROCKINGER Drawbar without sensor rail 330 mm, coupling pin 38 mm, JD green
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: JD green. Desc... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.019,62 €842,66 €780,70 €645,21
You save 23%
GRANIT Shim hood John Deere
€1,27 €1,05
HELLA Oil pressure switch engine open function (NO) 1/8 inch NPT, 0,4 - 0,6 bar
HELLA
Version: Thread: 1/8" NPT, Switching pressure: 0.4 - 0.6 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: black. Pressure range: 0,4 - 0,6 bar. Thread: ... More
Version: Thread: 1/8" NPT, Switching pressure: 0.4 - 0.6 bar, Blade te...
€10,75 €8,88
Cobo Headlight left / right 12 V, H4 60/55 W, dip- and main beam, ECE
Cobo
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal voltage: 12 V. Test mark: ECE. Light function: Dipped beam, full beam. Bulbs include... More
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal volt...
€74,60 €61,65 €67,45 €55,74
You save 10%
HELLA Main headlight insert left and right 164 x 103 mm, H4, 12 / 24 V
HELLA
Bulb: 12V60/55W / H4. Width: 167 mm. Height: 107 mm. Dimensions W x H x D: 167 x 107 x 109 mm. Depth: 109 mm. Installation location: Left/right. Nomin... More
Bulb: 12V60/55W / H4. Width: 167 mm. Height: 107 mm. Dimensions W x H ...
€51,52 €42,58 €43,35 €35,83
You save 16%
GRANIT Sensor 1-pin, 1/8 inch NPT conical
GRANIT
Version: 1-pin. Thread: 1/8” NPT, tapered. More
Version: 1-pin. Thread: 1/8” NPT, tapered.
€10,95 €9,05
Showing 25 - 48 of 234

John Deere 5095M parts for lighting, electrics and the cab

Long days with the work lights on and the air conditioning running put the electrical system of a 5095M to work. This page lists more than 200 parts that fit this John Deere from the 5M series, supplied by GRANIT, HELLA, Walterscheid, Cobo and ROCKINGER.

Relays, sensors and lamps

For the electrics there are changeover relays and micro relays, sensors and work lamps, including oval spotlights, plus headlights sold individually. When a circuit stops working, swap its relay with an identical one from a circuit that still works. If the fault moves with it, you have found the culprit without tracing a single wire. When ordering a new relay, check the number of pins and whether it needs a bracket.

Air conditioning and belt drive

Under the bonnet you will find an air conditioning compressor, V-belt tensioners and an air receiver gasket, along with O-rings, for example for the master brake cylinder, and other seals. A belt that squeals the moment the air conditioning kicks in usually points to a tensioner that has lost its spring. When you fit a new compressor, check that the tensioner still moves smoothly and returns properly. A sticky tensioner will wear out a new belt in no time.

Cab, bonnet and hitch

Door gas struts, cab hinges and bonnet plugs keep doors and panels closing properly and staying open when they should. At the back there are ball-type drawbars for the rail system and bushes for the pivot points.

Keep the drawbar ball lightly greased so the towing eye turns smoothly and ball and socket do not grind against each other dry. If the cab door rattles on the road, look at the hinges. A worn hinge pin creates play, and over time that play pulls the door seal out of line, letting in draughts and dust. A new hinge goes on quickly and the door closes tight again. Check the bushes at the pivot points while you are at it, as worn bushes often announce themselves only through rattles.

Making sure it fits

The type plate confirms you are working on a 5095M. If the old part still carries a reference number, use it to compare, as many sensors and relays look alike but have different connectors. Running other tractors from the 5M range? Each has its own page, so you can order per machine: the John Deere 5100M, 5090M, 5085M, 5105M, 5070M and 5115M. The 5075M belongs to the same range. Every other John Deere model is reachable through John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart