Menu
EUR

John Deere 5095M tractor parts & technical data

Sorting out the lights or the electrics on a John Deere 5095M? More than 200 parts for this 5M series tractor are listed here, trailer couplings among them.

234 parts found for John Deere 5095M
Show:
Shim rocker arm shaft Ø 20,65 x 29,46 x 0,5 mm John Deere
Dimensions: Ø 20.65 x 29.46 x 0.5 mm. More
Dimensions: Ø 20.65 x 29.46 x 0.5 mm.
€11,15 €9,21
GRANIT Sealing washer filler neck Ø 70 x 4,5 mm John Deere
GRANIT
Dimensions: Ø 70 x 4.5 mm. Description: For filler neck. More
Dimensions: Ø 70 x 4.5 mm. Description: For filler neck.
€12,90 €10,66
GRANIT Valve stem seal John Deere
€10,45 €8,64
GRANIT Exhaust gasket engine 6068 John Deere
Crankshaft seal for Ø 55,4 x 84 x 14,5 mm John Deere
Outer Ø: 84 mm. Width: 14,5 mm. Inner Ø: 55,4 mm. More
Outer Ø: 84 mm. Width: 14,5 mm. Inner Ø: 55,4 mm.
€39,00 €32,23
O-ring oil pump 24,994 x 3,531 mm John Deere
Dimensions: 24.994 x 3.531 mm. More
Dimensions: 24.994 x 3.531 mm.
€4,26 €3,52
GRANIT Thrust bearing John Deere
€36,26 €29,97 €34,40 €28,43
You save 5%
GRANIT Intake gasket inner Ø 54,5 mm, hole spacing 87 mm John Deere, Renault
GRANIT
Dimensions: innen Ø54,5 mm, Lochabstand 87 mm, Schrauben Ø 11 mm. More
Dimensions: innen Ø54,5 mm, Lochabstand 87 mm, Schrauben Ø 11 mm.
€2,94 €2,43
Outlet valve John Deere
GRANIT O-ring master brake cylinder 25,4 x 3,5 mm John Deere
GRANIT
Dimensions: 25.4 x 3.5 mm. More
Dimensions: 25.4 x 3.5 mm.
€7,50 €6,20
GRANIT Pin 18 x 65 mm, total length 76 mm, bore Ø 4,5 mm John Deere
GRANIT
Dimensions: 18 x 65, Total length = 76, Bore Ø = 4.5 mm. More
Dimensions: 18 x 65, Total length = 76, Bore Ø = 4.5 mm.
€31,75 €26,24
Lift rod right and left John Deere 5065M-5115M
€313,75 €259,30 €298,00 €246,28
You save 5%
Washer for cab door John Deere Series 5M-6630
Reference no.: L57824. More
Reference no.: L57824.
€7,60 €6,28
GRANIT Gas strut door 250 N, 260 mm John Deere SE6100-7530 PR
GRANIT
Newtons: 250. A: 260 mm. B: 130 mm. C: 10 mm. D: 10 mm. To fit: door. Form: 6. More
Newtons: 250. A: 260 mm. B: 130 mm. C: 10 mm. D: 10 mm. To fit: door. ...
€32,65 €26,98
Showing 121 - 144 of 234

John Deere 5095M parts for lighting, electrics and the cab

Long days with the work lights on and the air conditioning running put the electrical system of a 5095M to work. This page lists more than 200 parts that fit this John Deere from the 5M series, supplied by GRANIT, HELLA, Walterscheid, Cobo and ROCKINGER.

Relays, sensors and lamps

For the electrics there are changeover relays and micro relays, sensors and work lamps, including oval spotlights, plus headlights sold individually. When a circuit stops working, swap its relay with an identical one from a circuit that still works. If the fault moves with it, you have found the culprit without tracing a single wire. When ordering a new relay, check the number of pins and whether it needs a bracket.

Air conditioning and belt drive

Under the bonnet you will find an air conditioning compressor, V-belt tensioners and an air receiver gasket, along with O-rings, for example for the master brake cylinder, and other seals. A belt that squeals the moment the air conditioning kicks in usually points to a tensioner that has lost its spring. When you fit a new compressor, check that the tensioner still moves smoothly and returns properly. A sticky tensioner will wear out a new belt in no time.

Cab, bonnet and hitch

Door gas struts, cab hinges and bonnet plugs keep doors and panels closing properly and staying open when they should. At the back there are ball-type drawbars for the rail system and bushes for the pivot points.

Keep the drawbar ball lightly greased so the towing eye turns smoothly and ball and socket do not grind against each other dry. If the cab door rattles on the road, look at the hinges. A worn hinge pin creates play, and over time that play pulls the door seal out of line, letting in draughts and dust. A new hinge goes on quickly and the door closes tight again. Check the bushes at the pivot points while you are at it, as worn bushes often announce themselves only through rattles.

Making sure it fits

The type plate confirms you are working on a 5095M. If the old part still carries a reference number, use it to compare, as many sensors and relays look alike but have different connectors. Running other tractors from the 5M range? Each has its own page, so you can order per machine: the John Deere 5100M, 5090M, 5085M, 5105M, 5070M and 5115M. The 5075M belongs to the same range. Every other John Deere model is reachable through John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart