Menu
EUR

John Deere 5620 tractor parts & technical data

Maintaining a John Deere 5620 from the 5020/5020N series? This page has more than 400 matching parts, including lighting, electrics and trailer couplings.

441 parts found for John Deere 5620
Show:
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer = 177,8 mm 6 teeth More
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer...
€47,77 €39,48 €45,35 €37,48
You save 5%
Aircon compressor 10PA15C 12 V, pulley Ø 120 mm, 8 grooves
No. of grooves: 8 | For compressor: 10PA15C | Nominal voltage (V): 12 | Suitable oil: PAG 46 | Refrigerant: R 134a | Oil quantity (ccm): 160 | Referen... More
No. of grooves: 8 | For compressor: 10PA15C | Nominal voltage (V): 12 ...
€620,39 €512,72 €589,35 €487,07
You save 5%
Rear-view mirror 314 x 228 mm, heated, electric adjustment
Rod Ø (mm): 16 - 20 | Version: Heated, electric adjustment | Length (mm): 228 | Width (mm): 314 | Operating voltage (V): 24 | Radius of curvature (mm... More
Rod Ø (mm): 16 - 20 | Version: Heated, electric adjustment | Length (...
€170,91 €141,25 €162,35 €134,17
You save 5%
FEBI Cap John Deere 5620, 5720, 5820, 5080R, 5090R
FEBI
Cap John Deere 5620, 5720, 5820, 5080R, 5090R More
Cap John Deere 5620, 5720, 5820, 5080R, 5090R
€21,82 €18,03 €3,55 €2,93
You save 84%
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise, oil-tight
€618,13 €510,85 €386,30 €319,26
You save 38%
GRANIT Starter motor 12 V, 2,7 kW, 10 teeth, Ø 82,5 mm, clockwise
€337,01 €278,52 €320,15 €264,59
You save 5%
GRANIT Starter motor 12 V, 3,0 kW, 10 teeth clockwise, 259 mm
€302,54 €250,03 €287,40 €237,52
You save 5%
HELLA Starter motor 12 V, 3,1 kW, 10 teeth, Ø 83 mm, clockwise
€650,46 €537,57 €522,95 €432,19
You save 20%
Compression spring brake plate John Deere
Description: For brake plate 71712026. More
Description: For brake plate 71712026.
€35,63 €29,45 €33,80 €27,93
You save 5%
Dayco V-belt Powerband with compressed air system 2390 mm, 8 ribs, heavy duty
Dayco
Length: 2390 mm. Ribs: 8 n. Version: Heavy Duty. More
Length: 2390 mm. Ribs: 8 n. Version: Heavy Duty.
€80,59 €66,60 €76,55 €63,26
You save 5%
Dayco Multi-rib belt 1042 mm, 10 ribs Heavy Duty John Deere
Dayco
Length: 1042 mm. Ribs: 10 n. Version: Heavy Duty. More
Length: 1042 mm. Ribs: 10 n. Version: Heavy Duty.
€68,30 €56,45 €64,85 €53,60
You save 5%
MAHLE Inlet cover expansion tank 0,45 bar, grommet-Ø 37 mm, 76 x 76 x 37 mm
MAHLE
Neck Ø: 37 mm. Opening pressure: 0,45 bar. Notes: Green. Technical data: 76 x 76 x 37 mm. More
Neck Ø: 37 mm. Opening pressure: 0,45 bar. Notes: Green. Technical da...
€15,80 €13,06
Radiator hose, top John Deere 5620-5820
€71,81 €59,35 €68,20 €56,36
You save 5%
Optibelt Multi-rib belt Powerband John Deere 5083E-5101E, 6010-6420S
€90,47 €74,77 €85,90 €70,99
You save 5%
Intake gasket John Deere
Guard exhaust John Deere Series 5M-6410, SE6010-SE6420
€239,85 €198,22 €227,85 €188,31
You save 5%
GRANIT Piston set, complete Ø106,5 mm, combustion chamber 57 mm, John Deere
GRANIT
Dimensions: 3 rings, Ø 106.5 mm, Gudgeon pin 34.8 mm, Combustion chamber 57 mm, Combustion chamber depth 24 mm. Description: Supplied without O-ring. More
Dimensions: 3 rings, Ø 106.5 mm, Gudgeon pin 34.8 mm, Combustion cham...
€171,06 €141,37 €162,50 €134,30
You save 5%
Showing 385 - 408 of 441

John Deere 5620 parts

More than 400 John Deere 5620 parts are gathered on this page, covering the jobs that come up again and again on a working tractor of this size. Brands include GRANIT, HELLA, FEBI, MAHLE and Wabco.

Engine, belts and seals

Much of the routine work on a 5620 happens around the engine. There are O-rings, for example for the oil pump, gaskets such as the one for the regulator housing, and seals for door hinges and pull handles in the cab. For the belt drive you can choose single multi-rib belts or a complete belt kit, with or without air conditioning. Plugs, bushes and sensors are also available.

Belt choice is where many people go wrong on this tractor. A machine with an air conditioning compressor runs its belt over an extra pulley, so the belt is longer than on a tractor without one. Look under the bonnet before ordering. When you swap the belt, take a photo of the routing first and spin the tensioner pulley by hand. If it feels rough or has play, replace it at the same time.

Electrics, lights and hitching

On the electrical side there is a starter motor, alternators and LED work lights as well as work lamps with a spotlight beam. Headlights for dipped and main beam are on offer too. For towing there are drawbars, including an automatic type, plus connector heads for the air brake line. Internal plates for the clutch complete the picture.

Finding the exact match

The type plate confirms that your tractor is a 5620 from the John Deere 5020 series. For the part itself, the reference number is the best guide. John Deere stamps it into many castings and prints it on gaskets, so copy the number from the old part and compare it with the details shown with the product. With bushes and clutch plates that check matters most, since different versions look alike from the outside.

One tip for the brake couplings: red is the supply line and yellow is the control line. When you replace one connector head, check the rubber seal in its counterpart as well. A cracked seal leaks air and takes only a few minutes to change.

Parts for other models from the same maker are listed under John Deere parts, with one page per tractor.

If the number on a starter motor has worn off, count the teeth on the pinion and check the direction of rotation and the mounting. Those features are given with each product, so you can match them to the unit you take off.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart