Menu
EUR

John Deere 6020 tractor parts & technical data

A wide range of more than 500 parts fits the John Deere 6020. This page covers trailer couplings, electrics, and steering and front axle components.

501 parts found for John Deere 6020
Show:
GRANIT Ball joint 120 mm, taper 25 - 27 mm, M24 x 1,5 / M24 x 1,5
GRANIT
A: 120 mm. C: M24 x 1,5 mm. D: M24 x 1,5 mm. E: 25 mm. F: 27 mm. Taper: 25 - 27 mm. More
A: 120 mm. C: M24 x 1,5 mm. D: M24 x 1,5 mm. E: 25 mm. F: 27 mm. Taper...
€106,83 €88,29 €101,45 €83,84
You save 5%
GRANIT Axial joint right and left 216 mm, M26 x 1,5, M24 x 1,5, Ø 40 mm
GRANIT
A: 216 mm. C: M26 x 1,5 mm. D: M24 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm. More
A: 216 mm. C: M26 x 1,5 mm. D: M24 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm.
€133,27 €110,14 €126,60 €104,63
You save 5%
GRANIT Ball joint, complete 335 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,5 mm
GRANIT
A: 335 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 335 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€167,05 €138,06 €158,65 €131,12
You save 5%
GRANIT Seal cover brake cylinder John Deere
GRANIT Hand brake cable 880 mm John Deere Series 6D-6525, SE6020-SE6420
GRANIT
Length: 880 mm. Dimensions: Length = 880 mm. More
Length: 880 mm. Dimensions: Length = 880 mm.
€189,61 €156,70 €180,10 €148,84
You save 5%
GRANIT Brake disc Ø 313 x 5,9 mm, 14 teeth Heavy Duty John Deere
€271,87 €224,69 €258,25 €213,43
You save 5%
GRANIT Brake disc Ø 313 x 4,9 mm, 14 teeth John Deere
€199,25 €164,67 €189,25 €156,41
You save 5%
GRANIT Dipstick John Deere 6010-6620
€36,07 €29,81 €34,25 €28,31
You save 5%
GRANIT Plain bearing bush torsion damper 30 x 34 x 16 mm John Deere
GRANIT
Inner Ø: 30 mm. Outer Ø: 34 mm. Length: 16 mm. More
Inner Ø: 30 mm. Outer Ø: 34 mm. Length: 16 mm.
€4,05 €3,35
GRANIT PTO shaft end piece 1 3/8 inch 6 and 21 splines, 540-540E-1000 rpm.
GRANIT
Version: 1 3/8", 6 grooves, 1 3/8", 21 grooves, 14 splines, Can be switched between 540/540E/1000 rpm. Reference no.: L173241. More
Version: 1 3/8", 6 grooves, 1 3/8", 21 grooves, 14 splines, Can be swi...
€194,40 €160,66 €184,65 €152,60
You save 5%
Scharmüller Drawbar frame prepared draw pendulum 390/25/32 mm, 4000 kg, black
Scharmüller
suitable for: Fendt. Series: Favorit-Vario 900. Category: Bearing supports. Version: Prepared for drawbar. Colour: Black. D-value: 97,1 kN. Guide widt... More
suitable for: Fendt. Series: Favorit-Vario 900. Category: Bearing supp...
€1.586,80 €1.311,41
GRANIT Belt kit air conditioning, belt tensioner and idler pulley, belt 2475 mm, 8 ribs
GRANIT
Version: With air conditioning but without compressed air system. Contents: Belt tensioner, idler pulley, belt. Belt length: 2475 mm. Ribs: 8 n. More
Version: With air conditioning but without compressed air system. Cont...
€475,93 €393,33 €452,10 €373,64
You save 5%
GRANIT Belt kit pulley and tensioning pulley with compressed air, without air conditioning, 2385 mm
GRANIT
Version: With compressed air but without air conditioning system (only with 90A, 115A and 120A alternator). Contents: Grooved pulley, belt tensioner, ... More
Version: With compressed air but without air conditioning system (only...
€653,02 €539,69 €620,35 €512,69
You save 5%
Belt kit belt tensioner without air pressure and air conditioning, 1930 mm, 8 ribs
Version: Without compressed air and air conditioning system. Contents: Belt tensioner, belt. Belt length: 1930 mm. Ribs: 8 n. More
Version: Without compressed air and air conditioning system. Contents:...
€385,39 €318,50 €366,10 €302,56
You save 5%
Borg Warner Cooling fan Ø 600 mm John Deere Series 6M-6920S, SE6020-7530 PR
€346,63 €286,47 €304,25 €251,45
You save 12%
GRANIT Piston ring set 3 rings Ø 106,5 mm, 2,42 mm / 2,385 mm / 3,465 mm
€49,09 €40,57 €46,60 €38,51
You save 5%
GRANIT Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
GRANIT
Ø: 40,21 x 43,38 x 27,8 mm. More
Ø: 40,21 x 43,38 x 27,8 mm.
€18,40 €15,21
GRANIT Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
GRANIT
Ø: 40,21 x 43,38 x 27,8 mm. More
Ø: 40,21 x 43,38 x 27,8 mm.
€18,40 €15,21
GRANIT Clamp exhaust Ø 91 mm, width 18,4 mm John Deere
GRANIT
Ø: 91 mm. Width: 18,4 mm. More
Ø: 91 mm. Width: 18,4 mm.
€66,51 €54,97 €63,15 €52,19
You save 5%
Showing 337 - 360 of 501

John Deere 6020 parts for steering, front axle and electrics

Steering play on a John Deere 6020 is something you feel on every road trip, and it is often the first job that needs attention on a tractor of this type. This page carries more than 500 parts for the 6020, supplied by GRANIT, ROCKINGER, Sauermann, Scharmüller and HELLA.

Ball joints and the ZF front axle

Ball joints for the steering are available in several versions. When fitting one, make sure the taper and its seat in the steering knuckle are clean, dry and without grease, and secure the nut with a new split pin. For the ZF front axle there are external and internal plates, plus bushes, for example for the balancer shaft. Plates are always replaced as a full set and soaked in the correct oil before assembly. The ZF number is often stamped on the old plate itself.

Charging and switching

Alternators, relays and micro relays with changeover contacts keep the electrical system running. Before you replace an alternator, measure the charging voltage with the engine running and check the belt and earth connection. A relay is easiest to test by swapping it with an identical one from another circuit. If the fault moves with it, you have found the culprit. If the alternator is not charging, look at the heavy charge cable to the battery as well. A corroded terminal produces the same symptoms as a failed regulator and is cured with a wire brush and a little terminal grease.

Seals, hoses, seats and hitch

O-rings, gaskets and seals cover many positions, from the regulator housing gasket to the O-ring for the tank sender. Hoses are part of the range as well. In the cab there are tractor seats, including air suspended Maximo models. At the rear you will find drawbars, drawbar frames and forced steering units for trailers with a steered axle.

Making sure the part fits

The type plate shows the model and serial number. The serial number matters because parts can change over the production run of a single model. The reference number on the old part is the final check, so compare it with the product description before ordering.

Other tractors in the same family each have their own page, so you only see what fits that particular type:

The 6520, the 6420S and every other John Deere model are reachable through the overview of John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart