Menu
EUR

John Deere 6020 tractor parts & technical data

A wide range of more than 500 parts fits the John Deere 6020. This page covers trailer couplings, electrics, and steering and front axle components.

501 parts found for John Deere 6020
Show:
GRANIT Start switch without key and nut, blade connection
GRANIT
Version: With blade terminal Circuit:, 0: off, 1: consumer, 2: preheat, 3: start, Key 640RE183935, nut 640R44342. More
Version: With blade terminal Circuit:, 0: off, 1: consumer, 2: preheat...
€77,00 €63,64 €69,65 €57,56
You save 10%
Cover black for control unit heating and air conditioning
Version: For control unit, heater, air conditioning and rear windscreen wiper. More
Version: For control unit, heater, air conditioning and rear windscree...
€15,45 €12,77
GRANIT Micro relays changeover contact 12 V / 15 - 25 A, 5-pin, without bracket
GRANIT
Version: 12 V / 15 - 25 A, Without bracket, 5-pin, blade terminal. More
Version: 12 V / 15 - 25 A, Without bracket, 5-pin, blade terminal.
€7,40 €6,12
Cobo Micro relays changeover contact 12 V / 20 A, 5-pin, without bracket
Cobo
Version: 12 V / 20 A, Without bracket, 5-pin,. More
Version: 12 V / 20 A, Without bracket, 5-pin,.
€16,90 €13,97
GRANIT Temperature sensor thermostat housing M14 x 1,5, 40-100 °C
GRANIT
Version: Thermostat housing M14 x 1.5 | Max. 100. Thread: M14 x 1.5. Temperature: 40 - 100 °C. More
Version: Thermostat housing M14 x 1.5 | Max. 100. Thread: M14 x 1.5. T...
€56,53 €46,72 €53,70 €44,38
You save 5%
GRANIT Sensor engine speed 12 volt
GRANIT
Version: 12 V. More
Version: 12 V.
€68,81 €56,87 €62,25 €51,45
You save 10%
GRANIT Ball joint taper 25 - 27 mm, length 120 mm, M24 x 1,5
GRANIT
Taper (mm): 25 - 27. Length (mm): 120. Screw-in thread (mm): M24 x 1.5. More
Taper (mm): 25 - 27. Length (mm): 120. Screw-in thread (mm): M24 x 1.5...
€112,17 €92,70 €101,45 €83,84
You save 10%
GRANIT Electric cooling fan John Deere 6120-6920S, SE6020-SE6920
GRANIT
To fit as: John Deere 6020, 6120, 6215, 6220, 6320, 6420, 6420S, 6020SE, 6120SE, 6220SE, 6320SE, 6420SE, 6515, 6520, 6620, 6820, 6920, 6920S, 6520SE, ... More
To fit as: John Deere 6020, 6120, 6215, 6220, 6320, 6420, 6420S, 6020S...
€338,31 €279,60 €306,00 €252,89
You save 10%
Step tread John Deere 5070M-6534, SE6020-SE6920
To fit as: John Deere More
To fit as: John Deere
€69,82 €57,70 €66,30 €54,79
You save 5%
Internal plate Hi-Lo 5,16 mm, inner 219 mm, outer 292 mm, 87 teeth
Version: 292 x 219 x 5,16 mm 87 teeth More
Version: 292 x 219 x 5,16 mm 87 teeth
€93,29 €77,10 €88,60 €73,22
You save 5%
Sauermann Coupling pin Ø 32 mm, geleidehuls 87 mm John Deere 6020 - 7530 PR
€327,66 €270,79 €296,45 €245,00
You save 10%
GRANIT External plate thickness 3 mm, inner 138 mm, outer 215 mm
GRANIT
Version: thickness = 3 mm inner = 138 mm outer = 215 mm More
Version: thickness = 3 mm inner = 138 mm outer = 215 mm
€66,94 €55,32 €63,55 €52,52
You save 5%
GRANIT Internal plate 4wd 2,6 mm, inner 48 mm, outer 134 mm
GRANIT
Version: Thickness: 2.6 mm Inner: 48 mm Outer: 134 mm More
Version: Thickness: 2.6 mm Inner: 48 mm Outer: 134 mm
€45,83 €37,88 €43,50 €35,95
You save 5%
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer = 177,8 mm 6 teeth More
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer...
€47,77 €39,48 €45,35 €37,48
You save 5%
Pilot bearing 45 x 75 x 16 mm John Deere 5300 - 7530 PR
Dimensions (mm): 45 x 75 x 16 More
Dimensions (mm): 45 x 75 x 16
€23,55 €19,46
DANA Spicer O-ring differential front axle 745, 2 g
MAHLE Gear reduction starter 12 V, 3,4 kW, 10 teeth, Ø 82,5 mm, clockwise
€574,02 €474,40 €358,75 €296,49
You save 38%
MAHLE Gear reduction starter 12V 3,0 kW, 10 teeth clockwise
€574,50 €474,79 €359,00 €296,69
You save 38%
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise, oil-tight
€618,13 €510,85 €386,30 €319,26
You save 38%
GRANIT Starter motor with reduction 12 V, 4,0 kW, 10 teeth, mounting Ø 89,0 mm
€363,75 €300,62 €345,55 €285,58
You save 5%
HELLA Starter motor 12 V, 3,1 kW, 10 teeth, Ø 83 mm, clockwise
€650,46 €537,57 €522,95 €432,19
You save 20%
Tie rod and left 183 mm, M20 x 1,5, taper 23,5 - 26,5 mm
A: 183 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 183 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€173,68 €143,54 €164,95 €136,32
You save 5%
GRANIT Axial joint A 208 mm, C M22 x 1,5, D M24 x 1,5, Ø B 56 mm, Ø E 50 mm
GRANIT
A: 208 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 38 °. Ø B: 56 mm. Ø E: 50 mm. More
A: 208 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 38 °. Ø B: 56 mm. Ø...
€55,04 €45,49 €52,25 €43,18
You save 5%
Showing 409 - 432 of 501

John Deere 6020 parts for steering, front axle and electrics

Steering play on a John Deere 6020 is something you feel on every road trip, and it is often the first job that needs attention on a tractor of this type. This page carries more than 500 parts for the 6020, supplied by GRANIT, ROCKINGER, Sauermann, Scharmüller and HELLA.

Ball joints and the ZF front axle

Ball joints for the steering are available in several versions. When fitting one, make sure the taper and its seat in the steering knuckle are clean, dry and without grease, and secure the nut with a new split pin. For the ZF front axle there are external and internal plates, plus bushes, for example for the balancer shaft. Plates are always replaced as a full set and soaked in the correct oil before assembly. The ZF number is often stamped on the old plate itself.

Charging and switching

Alternators, relays and micro relays with changeover contacts keep the electrical system running. Before you replace an alternator, measure the charging voltage with the engine running and check the belt and earth connection. A relay is easiest to test by swapping it with an identical one from another circuit. If the fault moves with it, you have found the culprit. If the alternator is not charging, look at the heavy charge cable to the battery as well. A corroded terminal produces the same symptoms as a failed regulator and is cured with a wire brush and a little terminal grease.

Seals, hoses, seats and hitch

O-rings, gaskets and seals cover many positions, from the regulator housing gasket to the O-ring for the tank sender. Hoses are part of the range as well. In the cab there are tractor seats, including air suspended Maximo models. At the rear you will find drawbars, drawbar frames and forced steering units for trailers with a steered axle.

Making sure the part fits

The type plate shows the model and serial number. The serial number matters because parts can change over the production run of a single model. The reference number on the old part is the final check, so compare it with the product description before ordering.

Other tractors in the same family each have their own page, so you only see what fits that particular type:

The 6520, the 6420S and every other John Deere model are reachable through the overview of John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart