Do you run a John Deere 6120M from the 6M series? You will find more than 250 matching parts here, from trailer couplings to electrics and lighting.
On many farms the 6120M is the everyday tractor that feeds, mows and spreads, and it is the small parts that wear first on a machine like that. This page brings together more than 250 parts that fit the John Deere 6120M, from brands such as GRANIT, Sauermann, Walterscheid, Scharmüller and HELLA.
The eight rib V-belt for the 6120M is one of those parts every owner needs at some point. Fine cracks across the ribs or a squeal on start up mean it is time for a new one. Take a photo of the belt route around the pulleys before you remove the old belt and refitting becomes a lot easier.
Axial joints for the steering and bushes, for example for the fender, are also here. If the rubber boot on an axial joint splits, dirt gets in and the joint wears quickly. Replacing the boot early saves the joint.
When a fault comes and goes, a relay is a likely suspect. Swap it for an identical relay from the same box and see whether the problem moves with it.
Drawbar frames, including one prepared for a pendulum drawbar, forced steering and air brake connector heads cover the hitch. In the cab there are black grab handles. Lockable fuel filler caps and O-rings for the fuel line look after the fuel system. A fuel line that weeps at a fitting can often be cured with a new O-ring alone. Clean around the fitting before you open it so no grit finds its way into the fuel system.
Check the type plate to confirm the tractor is a 6120M. For sensors, relays and switches, the reference number on the old part is the quickest way to an exact match. Compare it with the details shown for each product on this page.
Each model in the 6M series has a page of its own, useful if another M sits next to the 6120M in the shed:
The whole brand is under John Deere parts, with a separate overview for each model.