Menu
EUR

John Deere 6130R tractor parts & technical data

This page lists more than 300 parts for the John Deere 6130R. Useful when you need trailer couplings, lighting or electrics for your 6R tractor in a hurry.

319 parts found for John Deere 6130R
Show:
HELLA LED work light flood beam 30 W, 12 / 24 V, 2500 lm John Deere
HELLA
LED work light flood beam 30 W, 12 / 24 V, 2500 lm John Deere
Light function: Close-range illumination | Housing colour: Black | Effective lum...
€232,25 €191,94
 
MAHLE Alternator 14 V, 200 A, flange 56 mm, John Deere
38%
MAHLE
Alternator 14 V, 200 A, flange 56 mm, John Deere
Belt width (mm) / type: - | Flange size (mm): 56,0 | Additional information: Com...
€673,37 €556,50 €420,85 €347,81
 
HELLA Alternator 14 V / 150 A, without belt pulley, 7,25 kg
20%
HELLA
Alternator 14 V / 150 A, without belt pulley, 7,25 kg
Nominal values (V / A): 14 / 150 | Charging current (A): 150 | Nominal voltage (...
€622,63 €514,57 €500,55 €413,68
 
DANA Spicer Seal kit steering front axle 745
5%
DANA Spicer
Seal kit steering front axle 745
€345,89 €285,86 €328,55 €271,53
 
HELLA Alternator 14 V, 120 A, without belt pulley John Deere
20%
HELLA
Alternator 14 V, 120 A, without belt pulley John Deere
Additional information: Without pulley | Nominal values (V / A): 14 / 120 | Char...
€515,56 €426,08 €414,51 €342,57
 
Gear reduction starter 12 V, 3,2 kW, 10 teeth, Ø 82,5 mm, flange 32 mm
5%
Gear reduction starter 12 V, 3,2 kW, 10 teeth, Ø 82,5 mm, flange 32 mm
€361,75 €298,97 €343,65 €284,01
 
HELLA Starter motor 12 V, 3,0 kW, 11 teeth, clockwise, mounting Ø 89 mm
20%
HELLA
Starter motor 12 V, 3,0 kW, 11 teeth, clockwise, mounting Ø 89 mm
€533,07 €440,55 €428,55 €354,17
 
Ball joint 230 mm, taper 29 - 31 mm, M28 x 1,5 / M28 x 1,5
5%
Ball joint 230 mm, taper 29 - 31 mm, M28 x 1,5 / M28 x 1,5
A: 230 mm. C: M28 x 1,5 mm. D: M28 x 1,5 mm. E: 29 mm. F: 31 mm. Taper: 29 - 31 ...
€124,17 €102,62 €117,95 €97,48
 
Axial joint A 250 mm, C M26 x 1,5, D M26 x 1,5, Ø B 67,8 mm, Ø E 50 mm
5%
Axial joint A 250 mm, C M26 x 1,5, D M26 x 1,5, Ø B 67,8 mm, Ø E 50 mm
A: 250 mm. C: M26 x 1,5 mm. D: M26 x 1,5 mm. Ø B: 67,8 mm. Ø E: 50 mm.
€130,57 €107,91 €124,00 €102,48
 
Ball joint, complete 350 mm, M24 x 1,5, M22 x 1,5, taper 27 - 30,5 mm
5%
Ball joint, complete 350 mm, M24 x 1,5, M22 x 1,5, taper 27 - 30,5 mm
A: 350 mm. C: M24 x 1,5 mm. D: M22 x 1,5 mm. E: 27 mm. F: 30,5 mm. Taper: 27 - 3...
€210,70 €174,13 €200,15 €165,41
 
GRANIT Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
GRANIT
Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
Ø: 40,21 x 43,38 x 27,8 mm.
€18,40 €15,21
 
GRANIT Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
GRANIT
Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
Ø: 40,21 x 43,38 x 27,8 mm.
€18,40 €15,21
 
Thermostat Ø 73 mm John Deere
Thermostat Ø 73 mm John Deere
€83,00 €68,60
 
Ball bearing fan drive Ø 25,4 x 47,6 x 70 mm John Deere
5%
Ball bearing fan drive Ø 25,4 x 47,6 x 70 mm John Deere
Ø: 25,4 x 47,6 x 70 mm. Shaft length: 123,5 mm. Description: For fan drive.
€91,51 €75,63 €86,90 €71,82
 
Filler cap for engine cooling
5%
Filler cap for engine cooling
€39,23 €32,42 €37,25 €30,79
 
GRANIT Rail pressure sensor John Deere 5M, 6M, 6R, 7R, 8R
5%
GRANIT
Rail pressure sensor John Deere 5M, 6M, 6R, 7R, 8R
€628,29 €519,25 €596,85 €493,26
 
GRANIT Heat shield John Deere 6130M-6170M, 6130R-6210R
GRANIT
Heat shield John Deere 6130M-6170M, 6130R-6210R
€691,95 €571,86
 
Bosch/Rexroth Hydraulic pump clockwise 45 cm³/rpm. John Deere 6090RC-7530
5%
Bosch/Rexroth
Hydraulic pump clockwise 45 cm³/rpm. John Deere 6090RC-7530
Output volume: 45 cc/rev. Direction of rotation: Right.
€2.818,61 €2.329,43 €2.677,65 €2.212,93
 
GASKET SET lift cylinder Ø 85 mm John Deere
5%
GASKET SET lift cylinder Ø 85 mm John Deere
Dimensions: Ø 85 mm. Technical data: für Hubzylinder.
€139,03 €114,90 €132,00 €109,09
 
GRANIT Washer rear window John Deere CTS 2066-9780
GRANIT
Washer rear window John Deere CTS 2066-9780
€8,55 €7,07
 
GRANIT Pick-up hitch hook John Deere
5%
GRANIT
Pick-up hitch hook John Deere
suitable for: John Deere.
€479,97 €396,67 €455,95 €376,82
 
GRANIT Torsion spring right John Deere 6090MC-7530 PR
GRANIT
Torsion spring right John Deere 6090MC-7530 PR
€17,35 €14,34
 
Showing 193 - 216 of 319

John Deere 6130R parts for steering, hitching and engine upkeep

Loader work and road miles are hard on the front axle and the hitch of a 6130R. For this member of the 6R range there are more than 300 parts on this page, from GRANIT, ROCKINGER, Scharmüller, Sauermann and Walterscheid. Here is where to start.

Steering: track rods and ball joints

A tractor that wanders on the road usually has play in a track rod end or ball joint. On the John Deere 6130R both can be replaced without taking the front axle apart. Count the turns as you unscrew the old track rod and set the new one to the same length, then have the toe-in checked. If the rubber boot on a ball joint has split, grit has already reached the ball, so replace the joint rather than just the boot.

Hitch and trailer couplings

  • ball drawbars and drawbar frames
  • flange hitches and trailer couplings
  • forced steering parts for trailed implements

Measure the rail width and pin diameter on the frame you have now and match them with the part you order.

Around the engine and fuel system

For routine servicing there are engine oil pressure sensors, coolant temperature sensors, fuel line O-rings, oil seals and micro relays. You will also find a lockable fuel cap and LED work lights for the 6130R.

A fuel line that weeps at a joint usually has a hardened O-ring. Wet the new O-ring with clean diesel or engine oil before you fit it, so it slides into place without tearing. Do the same with oil seals and you avoid a rolled lip on the first start.

Matching the right part

The surest route is the reference number on the part you take off. If that number appears with an item on this page, it fits. For sensors, the thread and the number of pins in the plug are a useful second check. With hitch parts, measurements matter more than anything else.

With a flange hitch, torque the bolts to the specified value and check them again after a few days of heavy pulling. The mating faces settle under load, and a loose flange wears its bolt holes oval surprisingly quickly.

Other tractors in the 6R range

Each model has its own page listing only the parts for that tractor:

The 6125R and 6145R are also part of the 6R family. To browse every model of the brand, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart