Menu
EUR

John Deere 6170R tractor parts & technical data

A dedicated range for the John Deere 6170R: more than 250 parts for the 6R series, including trailer couplings, lighting and electrics.

272 parts found for John Deere 6170R
Show:
Sauermann Forced steering ball Ø 50 mm, 110 x 65 mm John Deere
Sauermann
Assembly notes: Both ends | Description: Cranked upwards | Hole Ø (mm): 21 | Colour: Green | Hole pattern (mm): 110 x 65 | Ball Ø (mm): 50 More
Assembly notes: Both ends | Description: Cranked upwards | Hole Ø (mm...
€1.068,48 €883,04 €983,00 €812,40
You save 8%
Scharmüller Forced steering double-sided 2 ton, 250 mm, K50, black, John Deere
Scharmüller
Connection position: 250 mm | Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Both ends | Description: Approved for steering force... More
Connection position: 250 mm | Steering power (t): 2 | Colour: Black | ...
€1.222,48 €1.010,31 €1.124,68 €929,49
You save 8%
Wabco Compressor 1-cylinder 159 cm³, 8,5 bar John Deere 6105R - 6250R, 6400
Wabco
Speed (1/min.): 3000 | Cooling system: Air | Piston Ø (mm): 75,0 | Piston stroke (mm): 36 | Cylinder capacity (cm³): 159 | Operating pressure max. (... More
Speed (1/min.): 3000 | Cooling system: Air | Piston Ø (mm): 75,0 | Pi...
€1.996,21 €1.649,76 €1.836,51 €1.517,78
You save 8%
Connector head M16 x 1,5 yellow, brake line, vehicle
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no.: 55929 More
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no....
€23,54 €19,45
Plate Hi-Lo vane connection 4 mm, Ø 285 mm John Deere
Version: 4 mm, Ø 285 mm More
Version: 4 mm, Ø 285 mm
€80,83 €66,80 €74,36 €61,46
You save 8%
Sauermann Bolts trailer coupling 38,2 x 31 x 126 mm
€301,01 €248,77 €276,93 €228,87
You save 8%
Sauermann Verstelplaat with handle trailer coupling 330 mm rail width
€251,26 €207,65 €231,16 €191,04
You save 8%
Sauermann Hold-down device trailer coupling 131 x 85,5 mm, Ø 25,5 mm John Deere
€453,16 €374,51 €416,91 €344,55
You save 8%
Internal plate PTO shaft 3,5 mm, inner 130,5 mm, outer 197,2 mm
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines More
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines
€79,91 €66,04 €73,52 €60,76
You save 8%
External plate thickness 7 mm, inner 140 mm, outer 251 mm
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 221658 More
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 2...
€137,22 €113,41 €126,24 €104,33
You save 8%
Oil sump gasket John Deere engine 6068 Powertech 6.8 L
€31,75 €26,24
Alternator 14 V / 150 A, flange 56 mm
Nominal voltage (V): 14 | Flange size (mm): 56.0 | Form: B | Direction of rotation: ↻ | Mounting hole Ø / R (mm): 10.3 / 90.0 | Nominal values (V /... More
Nominal voltage (V): 14 | Flange size (mm): 56.0 | Form: B | Direction...
€293,13 €242,26 €269,68 €222,88
You save 8%
Alternator 14 V, 150 A, flange 55,8 mm
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (mm): 55,8 | Nominal voltage (V): 14 | Form: B | Pulley Ø (mm): - | Nominal value... More
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (m...
€215,54 €178,13 €198,30 €163,88
You save 8%
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 11,45 kg
Scharmüller
Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Co... More
Assembly notes: Anticlockwise | Description: Approved for steering for...
€636,37 €525,93 €585,46 €483,85
You save 8%
FEBI Hydraulic oil filter HF35474
€59,76 €49,39 €39,31 €32,49
You save 34%
Scharmüller Drawbar bracket 200 x 100 mm, bore M20, inner width 124 mm, black
Scharmüller
suitable for: New Holland. Series: T7 SWB (Tier 5). Category: Drawbar. Version: Brackets. Colour: Black. Hole: M20 mm. Internal width: 124 mm. Hole pa... More
suitable for: New Holland. Series: T7 SWB (Tier 5). Category: Drawbar....
€270,49 €223,55 €248,85 €205,66
You save 8%
Scharmüller Drawbar frame long 330/25/32, 2000 kg John Deere
Scharmüller
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Long. Colour: JD green. D-value: 91,3 kN. Guide width: 32 mm. Rail width:... More
suitable for: John Deere. Series: 6000. Category: Bearing supports. Ve...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€36,91 €30,50 €33,96 €28,06
You save 8%
Walterscheid Drawbar support M20, black, John Deere
Walterscheid
Colour: black | Description: Drawbar support that can be mounted securely in the direction of travel at the rear below the gearbox. More
Colour: black | Description: Drawbar support that can be mounted secur...
€638,58 €527,75 €504,86 €417,24
You save 21%
Plate Hi-Lo vane connection 4 mm, Ø 295 mm John Deere
Version: 4 mm, Ø 295 mm More
Version: 4 mm, Ø 295 mm
€70,35 €58,14 €64,72 €53,49
You save 8%
Scharmüller Drawbar frame prepared for drawbar 89,3 kN, 3000 kg, rail 330 mm
Scharmüller
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Category: Bearing supports | Load capacity (kg): 3000 | Version: Prepared for drawba... More
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Cate...
€1.754,76 €1.450,21 €1.664,38 €1.375,52
You save 5%
O-ring 34,5 x 3,5 mm John Deere 5080 - 8530
Version: Ø 34,5 x 3,5 mm More
Version: Ø 34,5 x 3,5 mm
€6,79 €5,61
Piston Hi-Lo clutch 246 x 292 mm John Deere
Version: 246 x 292 mm More
Version: 246 x 292 mm
€127,79 €105,61
Internal plate Hi-Lo 3,3 mm, inner 113 mm, outer 285 mm, 54 teeth
Version: 285 x 113 x 3.3 mm, 54 splines More
Version: 285 x 113 x 3.3 mm, 54 splines
€124,79 €103,13 €114,81 €94,88
You save 8%
Internal plate Hi-Lo 5,16 mm, inner 219 mm, outer 292 mm, 87 teeth
Version: 292 x 219 x 5,16 mm 87 teeth More
Version: 292 x 219 x 5,16 mm 87 teeth
€97,35 €80,45 €89,56 €74,02
You save 8%
External plate thickness 3 mm, inner 138 mm, outer 215 mm
Version: thickness = 3 mm inner = 138 mm outer = 215 mm More
Version: thickness = 3 mm inner = 138 mm outer = 215 mm
€69,85 €57,73 €64,26 €53,11
You save 8%
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm More
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm
€113,18 €93,54 €104,13 €86,05
You save 8%
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer = 177,8 mm 6 teeth More
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer...
€49,85 €41,20 €45,86 €37,90
You save 8%
Getriebegeschwindigkeitssensor Hall sensor John Deere 6150M - 8410T
€176,90 €146,20 €162,75 €134,50
You save 8%
LED work light oval spotlight 65 W, 3500 lm John Deere 5100R - 8320R
Operating temperature (°C): -40 / +50 | Mounting type: Vertical, M4 | Power consumption (W): 65 | No. of LEDs: 4 | Light function: Spotlight | Theore... More
Operating temperature (°C): -40 / +50 | Mounting type: Vertical, M4 |...
€82,01 €67,78 €75,45 €62,35
You save 8%
HELLA Alternator 14 V / 150 A, without belt pulley, 7,33 kg
HELLA
Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 150 | Charging current (A): 150 More
Nominal voltage (V): 14 | Additional information: Without pulley | Nom...
€749,79 €619,66 €577,70 €477,44
You save 23%
DANA Spicer King pin final drive front axle 755
€114,51 €94,64 €105,35 €87,07
You save 8%
FEBI Exhaust Gas Temperature Sensor John Deere 6170R, 6190R, 6210R
FEBI
Exhaust Gas Temperature Sensor John Deere 6170R, 6190R, 6210R More
Exhaust Gas Temperature Sensor John Deere 6170R, 6190R, 6210R
€284,35 €235,00 €211,70 €174,96
You save 26%
Scharmüller Drawbar frame standard 330/25/32 mm, 2000 kg, JD green John Deere
Scharmüller
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Standard. Colour: JD green. D-value: 91,3 kN. Guide width: 32 mm. Rail wi... More
suitable for: John Deere. Series: 6000. Category: Bearing supports. Ve...
€1.074,22 €887,79 €1.038,28 €858,08
You save 3%
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Colour: Black. Description: This product is a b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.152,79 €1.779,17 €1.702,02 €1.406,63
You save 21%
HELLA LED work lights flood beam 28 W, 1700 lm, 177 x 105 mm
HELLA
Nominal voltage: 12 / 24 V. Voltage range: 9 - 33 V. Bulb: LED. Bulbs included: Yes. Light function: Close-range illumination. Dimensions W x H x D: 1... More
Nominal voltage: 12 / 24 V. Voltage range: 9 - 33 V. Bulb: LED. Bulbs ...
€306,82 €253,57 €295,50 €244,22
You save 4%
Replacement glass mirror unheated 280 x 200 mm, radius 1800 mm John Deere
Tractor type: John Deere 6000, 6010, 6100, 6110, 6120, 6200, 6205, 6210, 6220, 6300, 6310, 6320, 6400, 6410, 6420, 6505, 6506, 6510, 6520, 6600, 6610,... More
Tractor type: John Deere 6000, 6010, 6100, 6110, 6120, 6200, 6205, 621...
€26,01 €21,50
ROCKINGER Forced steering double-sided, K50, John Deere
ROCKINGER
To fit: Rockinger ball insert or hitch support 787880K01140 | Lock: K50 | Assembly notes: Both ends More
To fit: Rockinger ball insert or hitch support 787880K01140 | Lock: K5...
€1.223,49 €1.011,15 €942,68 €779,08
You save 23%
Sauermann Trailer coupling rail 330 mm, hitch pin 31 mm, 97,1 kN John Deere
Sauermann
D-value (kN): 97,1 | Guide width (mm): 32 | Colour: JD green | Version: Sliding bolt | Lock: manual | Detent pin Ø (mm): 25 | Rail width (mm): 330 | ... More
D-value (kN): 97,1 | Guide width (mm): 32 | Colour: JD green | Version...
€625,47 €516,92 €575,43 €475,56
You save 8%
Piston Hi-Lo clutch Ø 290 x 230 mm, thickness 16 mm John Deere
Outer Ø (mm): 290 | Inner Ø (mm): 230 | Thickness (mm): 16 More
Outer Ø (mm): 290 | Inner Ø (mm): 230 | Thickness (mm): 16
€117,55 €97,15 €108,15 €89,38
You save 8%
Sauermann Top pin kit trailer coupling Ø 25 x 107 mm John Deere
€113,89 €94,12 €104,78 €86,59
You save 8%
Sauermann Bottom pin kit trailer coupling John Deere
€287,75 €237,81 €264,73 €218,79
You save 8%
External plate thickness 6 mm, inner 247 mm, outer 329 mm
Version: thickness = 6 mm inner = 247 mm outer = 329 mm More
Version: thickness = 6 mm inner = 247 mm outer = 329 mm
€136,63 €112,92 €125,70 €103,88
You save 8%
Internal plate reversing clutch 3,1 mm, inner 240 mm, outer 294 mm
Version: Thickness: 3.1 mm Inner: 240 mm Outer: 294 mm More
Version: Thickness: 3.1 mm Inner: 240 mm Outer: 294 mm
€80,30 €66,36 €73,88 €61,05
You save 8%
AKS-Dasis Filter dryer airco Ø 63 mm, 160 mm John Deere 6105M-6195M, 6110R-6250R
AKS-Dasis
Outer Ø (mm): 63 | Height (mm): 160 More
Outer Ø (mm): 63 | Height (mm): 160
€113,22 €93,57 €104,16 €86,08
You save 8%
MAHLE Alternator 14 V, 150 A, flange 56 mm, John Deere
MAHLE
Charging current (A): 150 | Form: B | Nominal voltage (V): 14 | Nominal values (V / A): 14 / 170 | Additional information: Compact alternator, dust-ti... More
Charging current (A): 150 | Form: B | Nominal voltage (V): 14 | Nomina...
€539,32 €445,72 €323,02 €266,96
You save 40%
Showing 49 - 96 of 272

John Deere 6170R parts for the PTO, fuel system and hitch

This page gathers more than 250 John Deere 6170R parts. They cover the PTO, the fuel system, the electrics and everything to do with hitching and steered trailers, from GRANIT alongside ROCKINGER, Sauermann, Scharmüller and Walterscheid.

PTO clutch and fuel

For the PTO clutch there are internal plates. If the PTO slips under load or rattles when you engage it, the plate pack is often worn. Measure the thickness of the old plates and replace them as a set, because new plates next to old ones do not share the load evenly. Soak new plates in the correct transmission oil for a while before fitting, so the lining is saturated before it takes load for the first time.

On the fuel side there is a fuel pressure sensor and O-rings for the fuel line. Never reuse an O-ring, and wet it lightly with clean oil or diesel when fitting. A dry ring can tear or roll as it goes in, and even a small leak on the low pressure side draws air and makes the engine hunt.

Hitching and forced steering

  • Drawbar frames and automatic drawbars
  • Ball type drawbars
  • Forced steering for self steering trailers
  • Air hoses and connector heads for trailer air brakes

Forced steering depends on a lock with no play in it. Each time you couple up, check that the lock engages cleanly and the ball shows no scoring. A little play grows quickly under load, and then the trailer no longer tracks cleanly through bends.

Electrical parts

For the electrics there are alternators, micro relays, temperature sensors, pressure switches and oil pressure switches, plus LED work lights. If the battery is not charging properly, check the belt and the earth connection before ordering a new alternator.

Getting the right part for the 6170R

Start at the type plate and note the serial number of your 6170R. Sensors, relays and switches nearly always carry a reference number that you can compare with the number on the product. For a drawbar or drawbar frame, the rail width and hole pattern of the current part decide fitment, and for clutch plates, measure the inner and outer diameter and the thickness.

Other tractors in the 6R series

The other models in the 6R series have their own pages: the John Deere 6130R, John Deere 6155R, John Deere 6175R, John Deere 6195R, John Deere 6215R and John Deere 6250R. For the whole brand, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart