Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

John Deere 6320 tractor parts & technical data

More than 750 replacement parts that fit the John Deere 6320 from the 6020 series, including trailer couplings, electrics and lighting.

755 parts found for John Deere 6320
Show:
Alternator 14 V / 90 A, flange 2 x 56 mm
8%
Alternator 14 V / 90 A, flange 2 x 56 mm
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | Pulley Ø (m...
€255,27 €210,97 €234,85 €194,09
 
Alternator 14 V / 150 A, flange 56 mm
8%
Alternator 14 V / 150 A, flange 56 mm
Nominal voltage (V): 14 | Flange size (mm): 56.0 | Form: B | Direction of rotati...
€293,13 €242,26 €269,68 €222,88
 
Alternator 14 V, 150 A, flange 55,8 mm
8%
Alternator 14 V, 150 A, flange 55,8 mm
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (mm): 55,8 |...
€215,54 €178,13 €198,30 €163,88
 
SANDEN Airco compressor 12 V, R134a, pulley Ø 120 mm, PV8, 180 ccm oil
8%
SANDEN
Airco compressor 12 V, R134a, pulley Ø 120 mm, PV8, 180 ccm oil
Nominal voltage (V): 12 | Oil quantity (ccm): 180 | For compressor: 10PA15C | Ad...
€651,29 €538,26 €599,19 €495,20
 
DANA Spicer King pin final drive front axle 740 John Deere 6020 - 6630
8%
DANA Spicer
King pin final drive front axle 740 John Deere 6020 - 6630
€112,98 €93,37 €103,94 €85,90
 
DANA Spicer Wheel hub final drive front axle 730
DANA Spicer
Wheel hub final drive front axle 730
€408,30 €337,44
 
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 11,45 kg
8%
Scharmüller
Forced steering 250 mm, K50, left, 2 ton, black, 11,45 kg
Assembly notes: Anticlockwise | Description: Approved for steering forces up to ...
€636,37 €525,93 €585,46 €483,85
 
LED work lights floodlight 40 W, 108 x 77 mm
8%
LED work lights floodlight 40 W, 108 x 77 mm
No. of LEDs: 4 x 10W | Form: Round | Menke no.: 228512 | Width (mm): 108 | Dimen...
€66,47 €54,93 €61,15 €50,54
 
GRAMMER Tractor seat Maximo Dynamic Plus air suspended, 565 mm, John Deere
7%
GRAMMER
Tractor seat Maximo Dynamic Plus air suspended, 565 mm, John Deere
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board voltage (V): ...
€5.303,07 €4.382,70 €4.928,82 €4.073,41
 
FEBI Hydraulic oil filter HF35474
34%
FEBI
Hydraulic oil filter HF35474
€59,76 €49,39 €39,31 €32,49
 
Starter motor 12 V, 2,7 kW, 10 teeth, Ø 82,5 mm, clockwise
8%
Starter motor 12 V, 2,7 kW, 10 teeth, Ø 82,5 mm, clockwise
€351,67 €290,64 €323,54 €267,39
 
HELLA Starter motor 12 V, 3,0 kW, 11 teeth, Ø 83 mm, clockwise
23%
HELLA
Starter motor 12 V, 3,0 kW, 11 teeth, Ø 83 mm, clockwise
€546,11 €451,33 €420,77 €347,74
 
Drive shaft 665 mm John Deere 6090MC, 6110-6430
8%
Drive shaft 665 mm John Deere 6090MC, 6110-6430
Length: 665 mm.
€1.208,34 €998,63 €1.111,67 €918,74
 
Scharmüller Drawbar bracket 200 x 120 mm, bore M18, inner width 120 mm, black
8%
Scharmüller
Drawbar bracket 200 x 120 mm, bore M18, inner width 120 mm, black
Hole pattern: 200 x 120 mm. Hole: M18 mm. Colour: Black. Internal width: 120 mm....
€322,05 €266,16 €296,29 €244,86
 
Scharmüller Drawbar frame long 330/25/32, 2000 kg John Deere
4%
Scharmüller
Drawbar frame long 330/25/32, 2000 kg John Deere
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Lon...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
 
Optibelt Multi-rib belt 8 ribs John Deere, Case IH, New Holland
8%
Optibelt
Multi-rib belt 8 ribs John Deere, Case IH, New Holland
€114,23 €94,41 €105,09 €86,85
 
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
8%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€36,91 €30,50 €33,96 €28,06
 
GRAMMER Tractor seat Maximo Professional MSG95AL/731 air suspended
GRAMMER
Tractor seat Maximo Professional MSG95AL/731 air suspended
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Option...
€3.917,46 €3.237,57
 
GASKET SET Ø 80 mm John Deere
8%
GASKET SET Ø 80 mm John Deere
Dimensions: Ø 80 mm mm.
€137,65 €113,76 €126,64 €104,66
 
Sauermann Drawbar 38 mm, 330 / 25 / 32 mm, 2500 kg, 97,1 kN
8%
Sauermann
Drawbar 38 mm, 330 / 25 / 32 mm, 2500 kg, 97,1 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 ...
€1.018,93 €842,09 €937,42 €774,72
 
Sauermann Drawbar inner part 330 mm, coupling pin 31 mm, 2500 kg
8%
Sauermann
Drawbar inner part 330 mm, coupling pin 31 mm, 2500 kg
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 32 ...
€809,65 €669,13 €744,88 €615,60
 
Walterscheid Drawbar support M20, black, John Deere
21%
Walterscheid
Drawbar support M20, black, John Deere
Colour: black | Description: Drawbar support that can be mounted securely in the...
€638,58 €527,75 €504,86 €417,24
 
Expander Repair bolt front axle suspension Ø 30 mm, 138 mm, M16 x 1,5 John Deere
Expander
Repair bolt front axle suspension Ø 30 mm, 138 mm, M16 x 1,5 John Deere
H (mm): 19 | To fit: John Deere | Splayed dimensions (mm): 0 - 2 | A (mm): 138 |...
€575,31 €475,46
 
Plate Hi-Lo vane connection 4 mm, Ø 295 mm John Deere
8%
Plate Hi-Lo vane connection 4 mm, Ø 295 mm John Deere
Version: 4 mm, Ø 295 mm
€70,35 €58,14 €64,72 €53,49
 
External plate thickness 2,2 mm, inner 100 mm, outer 146 mm
8%
External plate thickness 2,2 mm, inner 100 mm, outer 146 mm
Version: Thickness: 2.2 mm Inner: 100 mm Outer: 146 mm
€56,53 €46,72 €52,01 €42,98
 
Scharmüller Forced steering K50, 250 mm, both sides, black, 20,06 kg
8%
Scharmüller
Forced steering K50, 250 mm, both sides, black, 20,06 kg
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Both ends | ...
€1.222,48 €1.010,31 €1.124,68 €929,49
 
Scharmüller Forced steering K50, 250 mm, left, black, 12 kg John Deere
8%
Scharmüller
Forced steering K50, 250 mm, left, black, 12 kg John Deere
Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approve...
€636,37 €525,93 €585,46 €483,85
 
Scharmüller Drawbar frame prepared for drawbar 89,3 kN, 3000 kg, rail 330 mm
5%
Scharmüller
Drawbar frame prepared for drawbar 89,3 kN, 3000 kg, rail 330 mm
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Category: Bear...
€1.754,76 €1.450,21 €1.664,38 €1.375,52
 
Wabco Pressure regulator afblaasdruk 7,3 bar, safety valve 12 bar, M22 x 1,5
8%
Wabco
Pressure regulator afblaasdruk 7,3 bar, safety valve 12 bar, M22 x 1,5
Control range: 0,6 +0,4 | Safety valve opening pressure (bar): 12 +2 | Pressure ...
€625,38 €516,84 €575,35 €475,50
 
Wabco Quick exhaust valve M22 x 1,5, 12 bar, with double non-return valve
8%
Wabco
Quick exhaust valve M22 x 1,5, 12 bar, with double non-return valve
Operating pressure max. (bar): 12 | Fixing: 2 holes Ø 9.5 mm | To fit: Including...
€65,78 €54,36 €60,52 €50,01
 
Wabco Pressure relief valve 20 bar, inschakeldruk 16 bar, M16 x 1,5
8%
Wabco
Pressure relief valve 20 bar, inschakeldruk 16 bar, M16 x 1,5
Operating pressure max. (bar): 20 | Fixing: Hole Ø 8.2 x 57 mm | Opening pressur...
€257,83 €213,08 €237,20 €196,04
 
Wabco Trailer control valve mineral oil 0-1 bar, final pressure 20 bar, 2 m³
8%
Wabco
Trailer control valve mineral oil 0-1 bar, final pressure 20 bar, 2 m³
End pressure (bar): 20 | Set pressure (bar): 0-1 | Displacement (m³): 2
€1.905,32 €1.574,64 €1.752,89 €1.448,67
 
O-ring 34,5 x 3,5 mm John Deere 5080 - 8530
O-ring 34,5 x 3,5 mm John Deere 5080 - 8530
Version: Ø 34,5 x 3,5 mm
€6,79 €5,61
 
Piston Hi-Lo clutch 246 x 292 mm John Deere
Piston Hi-Lo clutch 246 x 292 mm John Deere
Version: 246 x 292 mm
€127,79 €105,61
 
Internal plate Hi-Lo 3,3 mm, inner 113 mm, outer 285 mm, 54 teeth
8%
Internal plate Hi-Lo 3,3 mm, inner 113 mm, outer 285 mm, 54 teeth
Version: 285 x 113 x 3.3 mm, 54 splines
€124,79 €103,13 €114,81 €94,88
 
Internal plate Hi-Lo 5,16 mm, inner 219 mm, outer 292 mm, 87 teeth
8%
Internal plate Hi-Lo 5,16 mm, inner 219 mm, outer 292 mm, 87 teeth
Version: 292 x 219 x 5,16 mm 87 teeth
€97,35 €80,45 €89,56 €74,02
 
Sauermann Bolt lock with release John Deere 5070M - 8530
8%
Sauermann
Bolt lock with release John Deere 5070M - 8530
Description: With release
€298,23 €246,47 €274,37 €226,75
 
Sauermann Coupling pin Ø 32 mm, geleidehuls 87 mm John Deere 6020 - 7530 PR
8%
Sauermann
Coupling pin Ø 32 mm, geleidehuls 87 mm John Deere 6020 - 7530 PR
€325,63 €269,12 €299,58 €247,59
 
Sauermann Cast lid Ø 8,2 mm John Deere
8%
Sauermann
Cast lid Ø 8,2 mm John Deere
€203,66 €168,31 €187,37 €154,85
 
External plate thickness 3,2 mm, inner 238 mm, outer 334 mm, 4 teeth
8%
External plate thickness 3,2 mm, inner 238 mm, outer 334 mm, 4 teeth
Version: Thickness: 3.2 mm Inner: 238 mm Outer: 334 mm 4 teeth
€65,27 €53,94 €60,05 €49,63
 
External plate thickness 10 mm, inner 238 mm, outer 347 mm, 4 teeth
8%
External plate thickness 10 mm, inner 238 mm, outer 347 mm, 4 teeth
Version: Thickness: 10 mm Inner: 238 mm Outer: 347 mm 4 teeth
€128,47 €106,17 €118,19 €97,68
 
External plate thickness 3 mm, inner 138 mm, outer 215 mm
8%
External plate thickness 3 mm, inner 138 mm, outer 215 mm
Version: thickness = 3 mm inner = 138 mm outer = 215 mm
€69,85 €57,73 €64,26 €53,11
 
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
8%
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm
€113,18 €93,54 €104,13 €86,05
 
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
8%
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer = 177,8 m...
€49,85 €41,20 €45,86 €37,90
 
Aircon compressor 10PA15C 12 V, pulley Ø 120 mm, 8 grooves
8%
Aircon compressor 10PA15C 12 V, pulley Ø 120 mm, 8 grooves
No. of grooves: 8 | For compressor: 10PA15C | Nominal voltage (V): 12 | Suitable...
€647,38 €535,02 €595,59 €492,22
 
HELLA Alternator 14 V / 150 A, without belt pulley, 7,33 kg
23%
HELLA
Alternator 14 V / 150 A, without belt pulley, 7,33 kg
Nominal voltage (V): 14 | Additional information: Without pulley | Nominal value...
€749,79 €619,66 €577,70 €477,44
 
DANA Spicer Ball joint 285 mm, M20 x 1,5 / M26 x 1,5, taper 23,66 - 26,2 mm
8%
DANA Spicer
Ball joint 285 mm, M20 x 1,5 / M26 x 1,5, taper 23,66 - 26,2 mm
€261,00 €215,70 €240,12 €198,45
 
Showing 97 - 144 of 755

John Deere 6320 parts for engine, cooling and towing

A John Deere 6320 that works hard tends to need attention in the same few places: the cooling system, the belt drive, starting and charging, and the hitch. This page lists more than 750 parts that fit this tractor, from brands such as GRANIT, HELLA, ROCKINGER, Sauermann and Wabco.

Engine and belt drive

For the cooling circuit there are thermostats, regulator housing gaskets, hoses and seals. On the belt side you can choose single multi-rib belts or complete belt kits. One thing that catches people out: a 6320 fitted with air conditioning takes a different belt from one without it, so lift the bonnet and check before ordering. The engine section also covers alternators, starter motors, sensors such as the engine oil pressure sensor, and O-rings including the one for the tank sender.

A workshop tip for thermostat jobs: always fit a new regulator housing gasket at the same time and clean both mating faces thoroughly. Reusing the old gasket looks like a time saver, but it usually ends with a weeping joint and coolant loss a few days later. Refill slowly afterwards and run the engine up to temperature so trapped air can work its way out, then check the expansion tank again after the first day of work.

Hitch, forced steering and lift arms

For trailer work there are automatic drawbars and drawbar frames, with ROCKINGER and Sauermann among the makes. Trailers with forced steering are covered by ball joints for both sides. Lift arms for the three-point linkage and work lamps for late finishes complete the picture.

On the drawbar it pays to check pins and bushes now and then. Worn pins leave play that you feel as a jolt every time you brake or pull away, and catching it early means swapping a few small parts rather than a whole frame. On forced steering, grease the balls regularly and keep an eye on the rubber boots, because grit that gets past a split boot wears the socket quickly.

Matching the part to your tractor

Start with the type plate so you know for certain the machine is a 6320 and not one of its neighbours in the 6020 line. Then look at the old part: alternators and starter motors carry their own plate with a number, belt lengths are usually printed on the back of the belt, and cast parts often have a reference number moulded in.

Other tractors from this line have pages of their own with the parts for each model: the John Deere 6120, the John Deere 6220, the John Deere 6420, the John Deere 6520, the John Deere 6620 and the John Deere 6820. For every John Deere page in one place, visit John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart