Menu
EUR

John Deere 6420S tractor parts & technical data

The range for the John Deere 6420S from the 6020/6020SE series is wide: more than 700 parts, with electrics, trailer couplings and lighting at its core.

698 parts found for John Deere 6420S
Show:
Sauermann Trailer coupling rail 330 mm, hitch pin 31 mm, 97,1 kN John Deere
Sauermann
D-value (kN): 97,1 | Guide width (mm): 32 | Colour: JD green | Version: Sliding bolt | Lock: manual | Detent pin Ø (mm): 25 | Rail width (mm): 330 | ... More
D-value (kN): 97,1 | Guide width (mm): 32 | Colour: JD green | Version...
€599,40 €495,37 €569,40 €470,58
You save 5%
DANA Spicer Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
DANA Spicer
Length (mm): 60 | Thread: M18 X 1,5 More
Length (mm): 60 | Thread: M18 X 1,5
€15,55 €12,85
Drive shaft length inserted 1600 mm John Deere
€1.191,25 €984,50 €1.131,65 €935,25
You save 5%
Drive shaft 665 mm John Deere 6090MC, 6110-6430
€1.157,97 €957,00 €1.100,00 €909,09
You save 5%
GRANIT Injector with blue or red marking John Deere
GRANIT
Version: With blue or red marking. More
Version: With blue or red marking.
€825,70 €682,40 €784,40 €648,26
You save 5%
Walterscheid Piton Fix rail width 390 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.792,68 €1.481,55 €1.408,50 €1.164,05
You save 21%
Sauermann Drawbar 38 mm, 330 / 25 / 32 mm, 2500 kg, 97,1 kN
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 97,1 kN. Colour: Black. Referenc... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.025,28 €847,34 €927,60 €766,61
You save 10%
Roof 860 x 1200 mm John Deere Series 6M-6900, SE6010-7530 PR
Dimensions: 860 x 1200 mm. More
Dimensions: 860 x 1200 mm.
€510,25 €421,69
GRANIT Potentiometer with lever control unit additional control device
GRANIT
Version: For control unit - additional control unit. More
Version: For control unit - additional control unit.
€198,70 €164,21
Walterscheid Drawbar support M20, black, John Deere
Walterscheid
Colour: black | Description: Drawbar support that can be mounted securely in the direction of travel at the rear below the gearbox. More
Colour: black | Description: Drawbar support that can be mounted secur...
€642,56 €531,04 €504,85 €417,23
You save 21%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€586,12 €484,40 €556,80 €460,17
You save 5%
Sauermann Wear plate trailer coupling HS 1500 John Deere
€187,07 €154,60 €177,70 €146,86
You save 5%
AKS-Dasis Filter dryer Ø 76 mm, 292 mm, connection thread F/M John Deere
AKS-Dasis
Material: Steel | Weight (g): 1.460 | Connection thread: F/M | Outer Ø (mm): 76 | Dimensions (mm): - | Thread: #6 3/8 O-ring | Length (mm): 292 More
...
€69,90 €57,77 €66,40 €54,88
You save 5%
HELLA Beacon KL 600 H1 orange, Ø 135 mm, push-on pin
HELLA
Mounting type: Pipe socket | Bulb: H1 | Power consumption (W): 55 | Bulbs included: Yes | Type: Halogen | Light function: Rotating | Colour: Yellow | ... More
Mounting type: Pipe socket | Bulb: H1 | Power consumption (W): 55 | Bu...
€139,80 €115,54
GRANIT Axialgelenk 211 mm, C: M26 x 1,5, D: M24 x 1,5
GRANIT
A: 211 mm. C: M26 x 1,5 mm. D: M24 x 1,5 mm. More
A: 211 mm. C: M26 x 1,5 mm. D: M24 x 1,5 mm.
€242,81 €200,67 €230,65 €190,62
You save 5%
Flywheel 142 teeth with torsion damper John Deere
Number of teeth: 142. More
Number of teeth: 142.
€698,79 €577,51 €663,85 €548,64
You save 5%
Bush camshaft Ø 55,88 x 59,87 x 38,9 mm John Deere
€45,15 €37,31 €42,85 €35,41
You save 5%
GRANIT Hose inner-Ø 8 mm, outer-Ø 15 mm, material thickness 3,5 mm
GRANIT
Outer Ø: 15 mm. Inner Ø: 8 mm. Material thickness: 3,5 mm. Description: Ø 7.5 mm. More
Outer Ø: 15 mm. Inner Ø: 8 mm. Material thickness: 3,5 mm. Descripti...
€7,70 €6,36
Intercooler John Deere 6320-6420S
GRANIT Connecting rod bolt 64 mm John Deere
GRANIT
Dimensions: 64 mm. More
Dimensions: 64 mm.
€8,85 €7,31
GRANIT Collet set John Deere
€3,62 €2,99
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€35,37 €29,23 €33,60 €27,77
You save 5%
Showing 25 - 48 of 698

John Deere 6420S parts for the engine, cooling and charging

More than 700 parts fit the John Deere 6420S, and the sections that follow concentrate on the engine and what surrounds it: O-rings and gaskets, the thermostat, hoses, the alternator and the starter motor. Alongside those you will find work lamps, headlights, a ball drawbar and external plates for the clutch.

Cooling and the belt drive

The thermostat decides how quickly the engine warms up and whether it holds its temperature. For the 6420S there is a thermostat together with the matching regulator housing gasket. Around the cooling system you will also find hose sold by the metre and sensors such as an engine oil pressure sensor.

The multi-rib belt drives the alternator and water pump, and on tractors with air conditioning the compressor as well. That is why there are belt kits for machines without air conditioning and separate multi-rib belts for those with it.

Tip: check whether your 6420S has air conditioning before ordering a belt, since the length depends on it. And never refit a thermostat without a fresh gasket. An old gasket that has already been compressed will nearly always weep once it is tightened again.

Charging and starting

A tractor that is slow to turn over does not always have a failed starter. Check the battery and the earth strap first. If the fault stays, the starter motor and alternator for the 6420S are both on this page. Because the alternator sits in the same belt drive, a replacement is a good moment to look at the condition of the belt.

Seals, clutch and lighting

Seals and bushes for various points on the tractor are here, as are external plates for the clutch. Work lamps and headlights, some from HELLA, light up the job after dark, and a ball drawbar covers the rear. Further parts come from GRANIT, MAHLE, Sauermann and Wabco.

With the external plates, replace a worn pack as a whole rather than a single plate. New plates next to old ones spread the pressure unevenly, and the clutch starts to slip or snatch.

Type plate and related models

The 6420S belongs to the John Deere 6020 series. Note that the 6420 and the 6420S each have a separate page, so check the type plate to see which one you own. When in doubt, the number on the old part settles it.

Other tractors from the 6020 series with a page of their own:

The 6520 and 6020 complete the series. For every model the brand offers, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart