Menu
EUR

John Deere 6506 tractor parts & technical data

For the John Deere 6506 in the 6000/6000SE series the range is wide: more than 500 parts, including lighting, trailer couplings and electrics.

540 parts found for John Deere 6506
Show:
Panclean Cab filter 590 x 132 x 83 mm
€57,96 €47,90 €52,40 €43,31
You save 10%
Stabilus Windshield frame shock absorber 170 N, 500 mm, stroke 200 mm John Deere
Stabilus
To fit as: John Deere Windscreen More
To fit as: John Deere Windscreen
€58,94 €48,71 €55,95 €46,24
You save 5%
Stabilus Gas strut door 350 N, 245 mm, stroke 69 mm John Deere
Stabilus
To fit as: John Deere Door More
To fit as: John Deere Door
€59,73 €49,36 €54,00 €44,63
You save 10%
GRANIT Top link cat. 3/2, M36 x 4 mm, 535 - 695 mm, hook / threaded spindle
GRANIT
To fit as: John Deere. Type: Tail hook/ball joint. Top link type: mechanisch. More
To fit as: John Deere. Type: Tail hook/ball joint. Top link type: m...
€292,36 €241,62 €277,70 €229,50
You save 5%
Sauermann Forced steering both sides ball-Ø 50 mm, 110 x 65 mm John Deere
Sauermann
Tractor type: John Deere 6130, 6330, 6430, 6530, 6630, 6830, 6930, 7730, 7830, 7930, 7430, 7530, 7630 More
Tractor type: John Deere 6130, 6330, 6430, 6530, 6630, 6830, 6930, 773...
€1.156,96 €956,17 €1.046,75 €865,08
You save 10%
Drive shaft 1800 mm John Deere 6415 - 7230
Length (mm): 1800 More
Length (mm): 1800
€1.049,07 €867,00 €996,60 €823,64
You save 5%
MAHLE Alternator 14 V / 95 A, pulley-Ø 80 mm, form B John Deere, Renault
MAHLE
Nominal voltage (V): 14 | Additional information: Compact alternator, dust-tight | Installation angle (°): r 10 | Mounting hole Ø / R (mm): 8,2 / 86... More
Nominal voltage (V): 14 | Additional information: Compact alternator, ...
€258,84 €213,92 €161,75 €133,68
You save 38%
MAHLE Alternator 14 V / 55 A, flange 56 mm, pulley-Ø 87 mm, form B
MAHLE
Flange size (mm): 56,0 | Additional information: Dust-tight | Installation angle (°): 0 | Belt width (mm) / type: 15,2 | Nominal values (V / A): 14 /... More
Flange size (mm): 56,0 | Additional information: Dust-tight | Installa...
€224,27 €185,35 €140,15 €115,83
You save 38%
Wabco Trailer control valve 3 bar, 19 bar, 1 m³ John Deere
Wabco
Displacement (m³): 1 | End pressure (bar): 19 | Set pressure (bar): 3 More
Displacement (m³): 1 | End pressure (bar): 19 | Set pressure (bar): 3
€1.244,99 €1.028,92 €1.126,40 €930,91
You save 10%
Connector head M16 x 1,5 yellow, brake line, vehicle
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no.: 55929 More
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no....
€22,55 €18,64
KS Piston ring set 3 rings 3,13 / 2,39 / 3,47 mm, Ø 106,5 mm John Deere
External plate thickness 10 mm, inner 238 mm, outer 347 mm, 4 teeth
Version: Thickness: 10 mm Inner: 238 mm Outer: 347 mm 4 teeth More
Version: Thickness: 10 mm Inner: 238 mm Outer: 347 mm 4 teeth
€123,12 €101,75 €116,95 €96,65
You save 5%
Voith Torsion damper John Deere 6100 - 6920S
Voith
Reference no.: AL81266 More
Reference no.: AL81266
€1.251,55 €1.034,34 €1.188,95 €982,60
You save 5%
GRANIT Internal plate reversing clutch 3,1 mm, inner 240 mm, outer 294 mm
GRANIT
Version: Thickness: 3.1 mm Inner: 240 mm Outer: 294 mm More
Version: Thickness: 3.1 mm Inner: 240 mm Outer: 294 mm
€76,96 €63,60 €73,10 €60,41
You save 5%
GRANIT External plate thickness 7 mm, inner 140 mm, outer 251 mm
GRANIT
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 221658 More
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 2...
€131,50 €108,68 €124,90 €103,22
You save 5%
Alternator 14 V / 120 A, flange 56 mm, Case IH, John Deere, Steyr
Installation angle (°): 0 | Pulley Ø (mm): - | Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Additional information: Dust-tight, with fan, with W con... More
Installation angle (°): 0 | Pulley Ø (mm): - | Mounting L / d / R (m...
€201,03 €166,14 €190,95 €157,81
You save 5%
Alternator 12 V / 70 A, flange 56 mm, pulley Ø 87 mm, John Deere
Pulley Ø (mm): 87 | Flange size (mm): 56,0 | Installation angle (°): 0 | Nominal voltage (V): 12 | Belt tension hole Ø / R (mm): M8 / 84,5 | Mounti... More
Pulley Ø (mm): 87 | Flange size (mm): 56,0 | Installation angle (°):...
€184,49 €152,47 €175,25 €144,83
You save 5%
Sauermann Housing, pick-up hitch complete John Deere
€269,35 €222,60 €255,85 €211,45
You save 5%
FEBI Hydraulic oil filter HF35474
€59,76 €49,39 €39,31 €32,49
You save 34%
ZF Planetary gear Ø 78,1 mm, 30 teeth ZF front axle 4475006011
€530,46 €438,40 €503,90 €416,45
You save 5%
ZF Universal joint 30 x 83 mm, maintenance-free
€346,12 €286,05 €328,80 €271,74
You save 5%
Ball joint right 258 mm, taper 24,6 - 28,5 mm, M22 x 1,5, M24 x 1,5
A: 258 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. Taper: 24,6 - 28,5 mm. More
A: 258 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. T...
€95,13 €78,62 €90,35 €74,67
You save 5%
Showing 241 - 264 of 540

John Deere 6506 parts

Keeping a John Deere 6506 running often comes down to the front axle. The plates in the ZF front axle, the belts at the front of the engine and the output of the alternator are where this tractor tends to ask for attention after years of work. This page lists more than 500 parts that fit the 6506, from GRANIT and from brands such as HELLA, ROCKINGER, Wabco and ZF.

Front axle plates

For the ZF front axle you will find both outer plates and inner plates. When you rebuild a plate pack, count the plates as you strip it and note the order in which inner and outer plates sit. Replace the pack as a set rather than single plates, and check the clearance once it is back together. Fill the axle with the oil specified for it, because the wrong oil makes plates slip or chatter.

Engine, belts and electrics

  • Multi-rib belts for the alternator, water pump and air conditioning drive.
  • Alternators in several versions.
  • O-rings, for example for the oil pump, and gaskets such as the thermostat gasket.
  • The flywheel seal and hoses for the cooling system.
  • Micro relays and headlights.

A multi-rib belt that squeals on a cold start or when the air conditioning kicks in is usually glazed or slack. When you fit a new belt, check the tensioner and pulleys too. A rough tensioner or a damaged pulley groove will chew through a fresh belt in no time.

If the alternator is no longer charging properly, measure the battery voltage with the engine running and inspect the earth connection and the plug at the back of the alternator first. A corroded contact produces the same symptoms as a worn regulator. When a function in the cab stops working while the fuse is fine, a micro relay is often the cause. Swap the suspect relay with an identical one from a circuit that works, and you know straight away.

Cab and drawbar

For the cab there are door gas struts and handles. At the rear you will find ROCKINGER drawbars and bushes for pivot points. If the door no longer stays open in the wind, the gas strut is usually the reason.

Ordering with confidence

Check the type plate and keep the old part to hand. The reference number on it, or the ZF number on axle plates, is a far safer match than the outside diameter alone. The 6506 is part of the John Deere 6000 range, as are the John Deere 6100 and the John Deere 6900. Both have their own page with the parts that fit them, which helps if you look after a contractor fleet or a mixed yard. Other models from the brand are under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart