Menu
EUR

John Deere 6506 tractor parts & technical data

For the John Deere 6506 in the 6000/6000SE series the range is wide: more than 500 parts, including lighting, trailer couplings and electrics.

540 parts found for John Deere 6506
Show:
GRANIT Thread insert for tank filler neck John Deere
GRANIT
Description: For tank filler neck. More
Description: For tank filler neck.
€19,70 €16,28
GRANIT Oil cooler with condenser air conditioning 565 x 405 mm John Deere
€557,51 €460,75 €529,60 €437,69
You save 5%
GRANIT Hose inner-Ø 8 mm, outer-Ø 15 mm, material thickness 3,5 mm
GRANIT
Outer Ø: 15 mm. Inner Ø: 8 mm. Material thickness: 3,5 mm. Description: Ø 7.5 mm. More
Outer Ø: 15 mm. Inner Ø: 8 mm. Material thickness: 3,5 mm. Descripti...
€7,70 €6,36
GRANIT Hose inner-Ø 5 mm, outer-Ø 12 mm, material thickness 3,5 mm
GRANIT
Inner Ø: 5 mm. Outer Ø: 12 mm. Material thickness: 3,5 mm. More
Inner Ø: 5 mm. Outer Ø: 12 mm. Material thickness: 3,5 mm.
€6,20 €5,12
Bush set lift arm shaft Ø 1 1/8 inch John Deere
Dimensions: Ø = 1 1/8" mm. More
Dimensions: Ø = 1 1/8" mm.
€34,85 €28,80 €33,10 €27,36
You save 5%
Walterscheid Stabilizer ASST-B/S with pin 350 mm, Ø 19,1 mm, B 44 mm, M30
Walterscheid
L: 350 mm. d: 19,1 mm. B: 44 mm. G: M30 mm. Spring travel: +/- 33. Description: <b>Advantages:</b> Safe transport Stability on hillsides No handling i... More
L: 350 mm. d: 19,1 mm. B: 44 mm. G: M30 mm. Spring travel: +/- 33. Des...
€774,82 €640,35 €629,50 €520,25
You save 19%
GRANIT Moulding hood John Deere
€38,70 €31,98
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.058,75 €875,00 €873,45 €721,86
You save 18%
GRANIT Spiegelarm left John Deere Series 5E-8970, SE6010-SE6620
GRANIT
Reference no.: AL77483. Installation location: Left. Menke no.: 134361. More
Reference no.: AL77483. Installation location: Left. Menke no.: 134361...
€245,81 €203,15 €233,50 €192,98
You save 5%
GRANIT Washer multifunction unit with direction control
GRANIT
Version: multifunction unit (with electric direction operation). More
Version: multifunction unit (with electric direction operation).
€18,20 €15,04
HELLA Beacon H1 KL Rotaflex 12 V, 55 W, Ø 135 mm, 222 mm, push-on pin
HELLA
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 135 mm. Total height: 222 mm. Connection: Socket pipe. Protection clas... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€139,80 €115,54
Headlight left / right 12 V, H4 60/55 W, dip- and main beam, built-in
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal voltage: 12 V. Light function: Dipped beam, full beam. Bulbs included: No. Mounting ... More
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal volt...
€113,74 €94,00 €108,00 €89,26
You save 5%
HELLA Rear light left / right with hybrid technology, 12 V
HELLA
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Colour: Yellow, red. Form: Rectangular. Cable length: - m. Installation location: Left, right. Nominal volta... More
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Colour: Yellow, red. Form: R...
€60,15 €49,71
GRANIT Bracket
€40,21 €33,23 €38,15 €31,53
You save 5%
Relays changeover contact 12 V, 20 - 30 A, 5-pin, without bracket
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal. More
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal.
€8,90 €7,36
HELLA Micro relays changeover contact 12 V, 30 - 40 A, 5-pin, with holder
HELLA
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal 6.3 mm. Function: Make contact relay (mini relay). More
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal 6.3 mm....
€19,30 €15,95
GRANIT Contact switch mechanical brake light, cab lighting, PTO shaft
GRANIT
Version: Various functions: Brake light switch, Cab lighting, Reversible rear PTO shaft, Range shift. More
Version: Various functions: Brake light switch, Cab lighting, Reversib...
€55,55 €45,91
GRANIT Contact switch lifting unit operation built-in rear on the fender
GRANIT
Version: Lifting unit operation, Mounting: on the rear mudguard. More
Version: Lifting unit operation, Mounting: on the rear mudguard.
€114,60 €94,71
GRANIT Hose inner-Ø 5 mm, outer-Ø 12 mm, material thickness 3,5 mm - 1 meter
€6,20 €5,12
Showing 97 - 120 of 540

John Deere 6506 parts

Keeping a John Deere 6506 running often comes down to the front axle. The plates in the ZF front axle, the belts at the front of the engine and the output of the alternator are where this tractor tends to ask for attention after years of work. This page lists more than 500 parts that fit the 6506, from GRANIT and from brands such as HELLA, ROCKINGER, Wabco and ZF.

Front axle plates

For the ZF front axle you will find both outer plates and inner plates. When you rebuild a plate pack, count the plates as you strip it and note the order in which inner and outer plates sit. Replace the pack as a set rather than single plates, and check the clearance once it is back together. Fill the axle with the oil specified for it, because the wrong oil makes plates slip or chatter.

Engine, belts and electrics

  • Multi-rib belts for the alternator, water pump and air conditioning drive.
  • Alternators in several versions.
  • O-rings, for example for the oil pump, and gaskets such as the thermostat gasket.
  • The flywheel seal and hoses for the cooling system.
  • Micro relays and headlights.

A multi-rib belt that squeals on a cold start or when the air conditioning kicks in is usually glazed or slack. When you fit a new belt, check the tensioner and pulleys too. A rough tensioner or a damaged pulley groove will chew through a fresh belt in no time.

If the alternator is no longer charging properly, measure the battery voltage with the engine running and inspect the earth connection and the plug at the back of the alternator first. A corroded contact produces the same symptoms as a worn regulator. When a function in the cab stops working while the fuse is fine, a micro relay is often the cause. Swap the suspect relay with an identical one from a circuit that works, and you know straight away.

Cab and drawbar

For the cab there are door gas struts and handles. At the rear you will find ROCKINGER drawbars and bushes for pivot points. If the door no longer stays open in the wind, the gas strut is usually the reason.

Ordering with confidence

Check the type plate and keep the old part to hand. The reference number on it, or the ZF number on axle plates, is a far safer match than the outside diameter alone. The 6506 is part of the John Deere 6000 range, as are the John Deere 6100 and the John Deere 6900. Both have their own page with the parts that fit them, which helps if you look after a contractor fleet or a mixed yard. Other models from the brand are under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart