Menu
EUR

John Deere 6520 tractor parts & technical data

Choose from more than 750 parts for the John Deere 6520. The range for the 6020 and 6020SE series includes trailer couplings, lighting and electrics.

758 parts found for John Deere 6520
Show:
Alternator 14 V, 150 A, flange 55,8 mm
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (mm): 55,8 | Nominal voltage (V): 14 | Form: B | Pulley Ø (mm): - | Nominal value... More
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (m...
€215,54 €178,13 €198,30 €163,88
You save 8%
SANDEN Airco compressor 12 V, R134a, pulley Ø 120 mm, PV8, 180 ccm oil
SANDEN
Nominal voltage (V): 12 | Oil quantity (ccm): 180 | For compressor: 10PA15C | Additional information: PV8 | Pulley Ø (mm): 120 | Fixing: DM | Refrige... More
Nominal voltage (V): 12 | Oil quantity (ccm): 180 | For compressor: 10...
€651,29 €538,26 €599,19 €495,20
You save 8%
DANA Spicer King pin final drive front axle 740 John Deere 6020 - 6630
€112,98 €93,37 €103,94 €85,90
You save 8%
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 11,45 kg
Scharmüller
Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Co... More
Assembly notes: Anticlockwise | Description: Approved for steering for...
€636,37 €525,93 €585,46 €483,85
You save 8%
LED work lights floodlight 40 W, 108 x 77 mm
No. of LEDs: 4 x 10W | Form: Round | Menke no.: 228512 | Width (mm): 108 | Dimensions W x H x D (mm): 108 x 77 | Fixing: Screw fixing | Nominal voltag... More
No. of LEDs: 4 x 10W | Form: Round | Menke no.: 228512 | Width (mm): 1...
€66,47 €54,93 €61,15 €50,54
You save 8%
GRAMMER Tractor seat Maximo Dynamic Plus air suspended, 565 mm, John Deere
GRAMMER
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board voltage (V): 12 | Seat heater: Yes | Upholstery type: Fabric / new design | Fore/af... More
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board vol...
€5.303,07 €4.382,70 €4.928,82 €4.073,41
You save 7%
FEBI Hydraulic oil filter HF35474
€59,76 €49,39 €39,31 €32,49
You save 34%
Scharmüller Drawbar bracket 200 x 120 mm, bore M18, inner width 120 mm, black
Scharmüller
Hole pattern: 200 x 120 mm. Hole: M18 mm. Colour: Black. Internal width: 120 mm. Version: Brackets. Category: Drawbar. More
Hole pattern: 200 x 120 mm. Hole: M18 mm. Colour: Black. Internal widt...
€322,05 €266,16 €296,29 €244,86
You save 8%
Scharmüller Drawbar frame long 330/25/32, 2000 kg John Deere
Scharmüller
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Long. Colour: JD green. D-value: 91,3 kN. Guide width: 32 mm. Rail width:... More
suitable for: John Deere. Series: 6000. Category: Bearing supports. Ve...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Optibelt Multi-rib belt 8 ribs John Deere, Case IH, New Holland
€114,23 €94,41 €105,09 €86,85
You save 8%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€36,91 €30,50 €33,96 €28,06
You save 8%
GRAMMER Tractor seat Maximo Professional MSG95AL/731 air suspended
GRAMMER
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 530 mm. Joystick console: Optiona... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€3.917,46 €3.237,57
GASKET SET Ø 80 mm John Deere
Dimensions: Ø 80 mm mm. More
Dimensions: Ø 80 mm mm.
€137,65 €113,76 €126,64 €104,66
You save 8%
Sauermann Drawbar 38 mm, 330 / 25 / 32 mm, 2500 kg, 97,1 kN
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 97,1 kN. Colour: Black. Referenc... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.018,93 €842,09 €937,42 €774,72
You save 8%
Walterscheid Drawbar support M20, black, John Deere
Walterscheid
Colour: black | Description: Drawbar support that can be mounted securely in the direction of travel at the rear below the gearbox. More
Colour: black | Description: Drawbar support that can be mounted secur...
€638,58 €527,75 €504,86 €417,24
You save 21%
Expander Repair bolt front axle suspension Ø 30 mm, 138 mm, M16 x 1,5 John Deere
Expander
H (mm): 19 | To fit: John Deere | Splayed dimensions (mm): 0 - 2 | A (mm): 138 | C (mm): 47,02 | Ø F (mm): M16 x 1,5 | Type: Special version | G (mm)... More
H (mm): 19 | To fit: John Deere | Splayed dimensions (mm): 0 - 2 | A (...
€575,31 €475,46
Plate Hi-Lo vane connection 4 mm, Ø 295 mm John Deere
Version: 4 mm, Ø 295 mm More
Version: 4 mm, Ø 295 mm
€70,35 €58,14 €64,72 €53,49
You save 8%
External plate thickness 2,2 mm, inner 100 mm, outer 146 mm
Version: Thickness: 2.2 mm Inner: 100 mm Outer: 146 mm More
Version: Thickness: 2.2 mm Inner: 100 mm Outer: 146 mm
€56,53 €46,72 €52,01 €42,98
You save 8%
ZF Pivot pin front axle 4475006011 Fendt, John Deere
€153,31 €126,70 €141,05 €116,57
You save 8%
Scharmüller Forced steering K50, 250 mm, both sides, black, 20,06 kg
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Both ends | Description: Approved for steering forces up to 20 kN (2 t) | Connecti... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Bo...
€1.222,48 €1.010,31 €1.124,68 €929,49
You save 8%
Scharmüller Forced steering K50, 250 mm, left, black, 12 kg John Deere
Scharmüller
Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm ... More
Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Descriptio...
€636,37 €525,93 €585,46 €483,85
You save 8%
Scharmüller Drawbar frame prepared for drawbar 89,3 kN, 3000 kg, rail 330 mm
Scharmüller
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Category: Bearing supports | Load capacity (kg): 3000 | Version: Prepared for drawba... More
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Cate...
€1.754,76 €1.450,21 €1.664,38 €1.375,52
You save 5%
Wabco Pressure regulator afblaasdruk 7,3 bar, safety valve 12 bar, M22 x 1,5
Wabco
Control range: 0,6 +0,4 | Safety valve opening pressure (bar): 12 +2 | Pressure regulator cut-off pressure (bar): 7,3 ±0,2 | Connection: M22 x 1,5 More
Control range: 0,6 +0,4 | Safety valve opening pressure (bar): 12 +2 |...
€625,38 €516,84 €575,35 €475,50
You save 8%
Wabco Quick exhaust valve M22 x 1,5, 12 bar, with double non-return valve
Wabco
Operating pressure max. (bar): 12 | Fixing: 2 holes Ø 9.5 mm | To fit: Including - EVOBUS - MERCEDES-BENZ | Inlet connection: 1: M22 x 1,5 | Version:... More
Operating pressure max. (bar): 12 | Fixing: 2 holes Ø 9.5 mm | To fit...
€65,78 €54,36 €60,52 €50,01
You save 8%
Wabco Pressure relief valve 20 bar, inschakeldruk 16 bar, M16 x 1,5
Wabco
Operating pressure max. (bar): 20 | Fixing: Hole Ø 8.2 x 57 mm | Opening pressure (bar): p2 + 2,5 | Output pressure (bar): 7,4 + 0,2 | Inlet connecti... More
Operating pressure max. (bar): 20 | Fixing: Hole Ø 8.2 x 57 mm | Open...
€257,83 €213,08 €237,20 €196,04
You save 8%
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M12 x 1,5, standard open
€353,16 €291,87 €324,91 €268,52
You save 8%
Wabco Trailer control valve mineral oil 0-1 bar, final pressure 20 bar, 2 m³
Wabco
End pressure (bar): 20 | Set pressure (bar): 0-1 | Displacement (m³): 2 More
End pressure (bar): 20 | Set pressure (bar): 0-1 | Displacement (m³):...
€1.905,32 €1.574,64 €1.752,89 €1.448,67
You save 8%
O-ring 34,5 x 3,5 mm John Deere 5080 - 8530
Version: Ø 34,5 x 3,5 mm More
Version: Ø 34,5 x 3,5 mm
€6,79 €5,61
Piston Hi-Lo clutch 246 x 292 mm John Deere
Version: 246 x 292 mm More
Version: 246 x 292 mm
€127,79 €105,61
Internal plate Hi-Lo 3,3 mm, inner 113 mm, outer 285 mm, 54 teeth
Version: 285 x 113 x 3.3 mm, 54 splines More
Version: 285 x 113 x 3.3 mm, 54 splines
€124,79 €103,13 €114,81 €94,88
You save 8%
Internal plate Hi-Lo 5,16 mm, inner 219 mm, outer 292 mm, 87 teeth
Version: 292 x 219 x 5,16 mm 87 teeth More
Version: 292 x 219 x 5,16 mm 87 teeth
€97,35 €80,45 €89,56 €74,02
You save 8%
Sauermann Bolt lock with release John Deere 5070M - 8530
Sauermann
Description: With release More
Description: With release
€298,23 €246,47 €274,37 €226,75
You save 8%
Sauermann Coupling pin Ø 32 mm, geleidehuls 87 mm John Deere 6020 - 7530 PR
€325,63 €269,12 €299,58 €247,59
You save 8%
Sauermann Cast lid Ø 8,2 mm John Deere
€203,66 €168,31 €187,37 €154,85
You save 8%
External plate thickness 3,2 mm, inner 238 mm, outer 334 mm, 4 teeth
Version: Thickness: 3.2 mm Inner: 238 mm Outer: 334 mm 4 teeth More
Version: Thickness: 3.2 mm Inner: 238 mm Outer: 334 mm 4 teeth
€65,27 €53,94 €60,05 €49,63
You save 8%
External plate thickness 10 mm, inner 238 mm, outer 347 mm, 4 teeth
Version: Thickness: 10 mm Inner: 238 mm Outer: 347 mm 4 teeth More
Version: Thickness: 10 mm Inner: 238 mm Outer: 347 mm 4 teeth
€128,47 €106,17 €118,19 €97,68
You save 8%
Bearing torsion damper outer-Ø 34 mm, inner-Ø 30 mm John Deere
Outer Ø (mm): 34 | Hole Ø (mm): 12 | Inner Ø (mm): 30 More
Outer Ø (mm): 34 | Hole Ø (mm): 12 | Inner Ø (mm): 30
€93,64 €77,39 €86,15 €71,20
You save 8%
External plate thickness 3 mm, inner 138 mm, outer 215 mm
Version: thickness = 3 mm inner = 138 mm outer = 215 mm More
Version: thickness = 3 mm inner = 138 mm outer = 215 mm
€69,85 €57,73 €64,26 €53,11
You save 8%
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm More
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm
€113,18 €93,54 €104,13 €86,05
You save 8%
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer = 177,8 mm 6 teeth More
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer...
€49,85 €41,20 €45,86 €37,90
You save 8%
Aircon compressor 10PA15C 12 V, pulley Ø 120 mm, 8 grooves
No. of grooves: 8 | For compressor: 10PA15C | Nominal voltage (V): 12 | Suitable oil: PAG 46 | Refrigerant: R 134a | Oil quantity (ccm): 160 | Referen... More
No. of grooves: 8 | For compressor: 10PA15C | Nominal voltage (V): 12 ...
€647,38 €535,02 €595,59 €492,22
You save 8%
Valve cover gasket John Deere 6505 - 7810, WTS 9540 - 9580
€51,06 €42,20 €46,98 €38,82
You save 8%
HELLA Alternator 14 V / 150 A, without belt pulley, 7,33 kg
HELLA
Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 150 | Charging current (A): 150 More
Nominal voltage (V): 14 | Additional information: Without pulley | Nom...
€749,79 €619,66 €577,70 €477,44
You save 23%
DANA Spicer King pin final drive front axle 755
€114,51 €94,64 €105,35 €87,07
You save 8%
FEBI Thermostat Ø 54 mm, 82 °C John Deere, Sabre
FEBI
To fit as: John Deere, Sabre. Tractor types: 4520, 4620, 3030, 3130 (from 235170), 4430, 4630, 3040, 3140, 3640, 4040S, 4240, 4240S, 4440, 4640, 4840,... More
To fit as: John Deere, Sabre. Tractor types: 4520, 4620, 3030, 3130 (f...
€24,08 €19,90 €11,17 €9,23
You save 54%
FEBI Engine oil filter Ø 92,96 mm, height 150,88 mm, thread M92 x 2,5
€29,97 €24,77 €19,21 €15,88
You save 36%
FEBI Multi-rib belt with air conditioning system 8 ribs John Deere 5070M
€71,01 €58,69 €21,50 €17,77
You save 70%
Showing 97 - 144 of 758

John Deere 6520 parts for the hitch, steering and hydraulics

The John Deere 6520 earns its keep at the back end, so that is where this page starts. Of the more than 750 parts listed for this tractor, many concern coupling and towing: drawbars with ball or automatic hitch, drawbar frames from ROCKINGER and Sauermann, and forced steering rods for trailers with a steered axle. Lift arms for the three point linkage are here too.

Looking after forced steering

Forced steering links the trailer axle to the tractor through a rod with a ball at each end. Those balls and their sockets take every turn on the headland, so check them for play whenever the trailer is unhitched. A joint that clicks or moves in its cup will make the trailer track badly and wear tyres. Keep the balls greased, fit the protective caps where they exist and replace both ends together if one is worn, so the steering stays even.

Engine, electrics and seals

Under the bonnet the 6520 needs the usual care, and this page covers it with:

  • Alternators and multi-rib belts, as well as belt kits
  • Thermostats with the matching regulator housing gasket
  • Hoses and sensors, including the engine oil pressure sensor
  • O-rings for the oil pump, gaskets and seals
  • External clutch plates for transmission work
  • Work lamps, with HELLA among the brands

Wabco is also represented among the makers of these parts.

Getting the right fit

The type plate tells you the model and serial number of your tractor, which is your starting point for any order. For belt kits, look at the equipment on your engine first: a kit meant for a tractor without air compressor and air conditioning follows a different belt path from one for a fully equipped machine. For seals and sensors, read the reference number off the old part and compare it with the number shown with each item.

A thermostat that sticks shows up as an engine that never reaches working temperature or one that runs hot under load. When you change it, fit a new regulator housing gasket and make sure the small bleed hole sits at the top so trapped air can escape.

The rest of the 6020 series

The 6520 sits in a family of tractors that look alike from the outside, but each has its own page so you only see parts that fit: the John Deere 6120, John Deere 6220, John Deere 6320, John Deere 6420, John Deere 6620 and John Deere 6820. The 6020 and 6420S belong to the same series. For the whole brand, see John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart