Menu
EUR

John Deere 6530 tractor parts & technical data

A wide choice for the John Deere 6530 from the 6030/6030PR range, with more than 700 parts covering trailer couplings, lighting and electrics, among others.

704 parts found for John Deere 6530
Show:
Connector head M16 x 1,5 red, supply line, vehicle
Connector head M16 x 1,5 red, supply line, vehicle
Application: Vehicle | Connection thread: M16 x 1.5 | Version: Red, supply line ...
€23,80 €19,67
 
O-ring 12,3 x 3,5 mm John Deere 5080 - 7930
O-ring 12,3 x 3,5 mm John Deere 5080 - 7930
Version: Ø 12,3 x 3,5 mm
€2,95 €2,44
 
Sauermann Wear plate trailer coupling HS 1710-1KUD/3KUD
5%
Sauermann
Wear plate trailer coupling HS 1710-1KUD/3KUD
€172,30 €142,40 €163,65 €135,25
 
Sauermann Locking bolt set trailer coupling 330 mm rail width
5%
Sauermann
Locking bolt set trailer coupling 330 mm rail width
€205,09 €169,50 €194,80 €160,99
 
Sauermann Top pin kit trailer coupling Ø 25 x 107 mm John Deere
5%
Sauermann
Top pin kit trailer coupling Ø 25 x 107 mm John Deere
€109,14 €90,20 €103,65 €85,66
 
Sauermann Hold-down device trailer coupling 131 x 85,5 mm, Ø 25,5 mm John Deere
10%
Sauermann
Hold-down device trailer coupling 131 x 85,5 mm, Ø 25,5 mm John Deere
€455,98 €376,84 €412,55 €340,95
 
Bearing torsion damper outer-Ø 34 mm, inner-Ø 30 mm John Deere
5%
Bearing torsion damper outer-Ø 34 mm, inner-Ø 30 mm John Deere
Outer Ø (mm): 34 | Hole Ø (mm): 12 | Inner Ø (mm): 30
€89,73 €74,16 €85,20 €70,41
 
Internal plate PTO shaft 3,5 mm, inner 130,5 mm, outer 197,2 mm
5%
Internal plate PTO shaft 3,5 mm, inner 130,5 mm, outer 197,2 mm
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines
€76,58 €63,29 €72,75 €60,12
 
External plate thickness 6 mm, inner 247 mm, outer 329 mm
5%
External plate thickness 6 mm, inner 247 mm, outer 329 mm
Version: thickness = 6 mm inner = 247 mm outer = 329 mm
€130,93 €108,21 €124,35 €102,77
 
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
5%
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm
€108,46 €89,64 €103,00 €85,12
 
GRANIT Filter dryer 190 mm, #6 o-ring John Deere 6020 - 6920
5%
GRANIT
Filter dryer 190 mm, #6 o-ring John Deere 6020 - 6920
Weight (g): 400 | Length (mm): 190 | Connection thread: F/M | Thread: #6 O-ring
€52,79 €43,63 €50,15 €41,45
 
LUK Pilot bearing PTO shaft 45 x 75 x 16 mm Fendt, John Deere
5%
LUK
Pilot bearing PTO shaft 45 x 75 x 16 mm Fendt, John Deere
€86,64 €71,60 €82,30 €68,02
 
MAHLE Alternator 14 V, 200 A, flange 56 mm, John Deere
38%
MAHLE
Alternator 14 V, 200 A, flange 56 mm, John Deere
Belt width (mm) / type: - | Flange size (mm): 56,0 | Additional information: Com...
€673,37 €556,50 €420,85 €347,81
 
MAHLE Alternator 14 V, 120 A, fastening 56 / 10,2 / 90 mm John Deere
38%
MAHLE
Alternator 14 V, 120 A, fastening 56 / 10,2 / 90 mm John Deere
Direction of rotation: ↻ | Charging current (A): 120 | Flange size (mm): 56,0 | ...
€498,83 €412,26 €311,75 €257,64
 
Alternator 14 V / 90 A, flange 2 x 56 mm
5%
Alternator 14 V / 90 A, flange 2 x 56 mm
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | Pulley Ø (m...
€244,63 €202,17 €232,35 €192,02
 
Alternator 14 V, 150 A, flange 55,8 mm
5%
Alternator 14 V, 150 A, flange 55,8 mm
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (mm): 55,8 |...
€206,56 €170,71 €196,20 €162,15
 
Cobo Reflector John Deere 5085M - 7530 PR
Cobo
Reflector John Deere 5085M - 7530 PR
€6,80 €5,62
 
GRANIT Hubspindel John Deere 6010 - 6620
5%
GRANIT
Hubspindel John Deere 6010 - 6620
€158,15 €130,70 €150,20 €124,13
 
LED work lights floodlight left 20 W, 121,4 x 116,5 x 111,2 mm
5%
LED work lights floodlight left 20 W, 121,4 x 116,5 x 111,2 mm
Light function: Floodlight | Light colour (K): 5500-5700 | Form: Rectangular | C...
€95,37 €78,82 €90,60 €74,88
 
HELLA Alternator 14 V / 85 A, without belt pulley, Fendt, John Deere
20%
HELLA
Alternator 14 V / 85 A, without belt pulley, Fendt, John Deere
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal voltage (V)...
€411,92 €340,43 €331,15 €273,68
 
HELLA Alternator 14 V / 150 A, without belt pulley, 7,25 kg
20%
HELLA
Alternator 14 V / 150 A, without belt pulley, 7,25 kg
Nominal values (V / A): 14 / 150 | Charging current (A): 150 | Nominal voltage (...
€622,63 €514,57 €500,55 €413,68
 
HELLA Alternator 14 V / 150 A, without belt pulley, 7,33 kg
20%
HELLA
Alternator 14 V / 150 A, without belt pulley, 7,33 kg
Nominal voltage (V): 14 | Additional information: Without pulley | Nominal value...
€718,53 €593,83 €577,70 €477,44
 
DANA Spicer Seal kit steering front axle 745
5%
DANA Spicer
Seal kit steering front axle 745
€345,89 €285,86 €328,55 €271,53
 
DANA Spicer King pin final drive front axle 740 John Deere 6020 - 6630
5%
DANA Spicer
King pin final drive front axle 740 John Deere 6020 - 6630
€108,27 €89,48 €102,85 €85,00
 
Showing 433 - 456 of 704

John Deere 6530 parts for engine servicing and work lights

More than 700 John Deere 6530 parts are listed on this page, which is a lot to scroll through, so here is where to start. On a tractor that clocks up long hours, the jobs tend to be routine engine work: belts, thermostat, sensors, gaskets and O-rings. Work lights, headlights and the hitch gear at the back come up regularly as well.

Around the engine

For the 6530 there are thermostats for the cooling system, sensors such as the engine oil pressure sender, gaskets including the one for the exhaust gas recirculation valve, and O-rings, for example for the oil pump. Alternators and micro relays complete the electrical side. A thermostat that sticks open keeps the engine from ever reaching proper temperature. You will notice the gauge barely moving in winter and fuel use creeping up.

Belts with or without air conditioning

Multi-rib belts and complete belt kits drive the alternator, water pump and air conditioning compressor. Before you order, check whether your 6530 has air conditioning. Belts for tractors with air conditioning come in a different length and with a different number of ribs. A belt meant for a tractor without it will not go round the pulleys, or the other way round it will run slack. Count the ribs on the old belt and note which pulleys it drives. If the tensioner feels rough, replace it while the belt is off.

Lights and hitch

If you work after dark, decent work lights matter. This page has spotlights, including HELLA, and left and right headlights. At the rear there are drawbar frames, drawbar balls and forced steering parts, Scharmüller among the makers. Gas struts for the cab and seals for door hinges and handles round things off. Parts also come from GRANIT, Sauermann and MAHLE.

Finding the part that matches your 6530

Start with the rating plate. The 6530 belongs to the 6030 series, where the models look almost identical from outside but parts are matched per model. With the old part in hand, look for a reference number. It is often cast in or printed on the part. If nothing is legible any more, compare the shape, connections and mounting points of the old part with the description.

The sister models each have their own page:

The 6534 is part of the same series. Other models from the brand are on the John Deere parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart