Menu
EUR

John Deere 6530 tractor parts & technical data

A wide choice for the John Deere 6530 from the 6030/6030PR range, with more than 700 parts covering trailer couplings, lighting and electrics, among others.

704 parts found for John Deere 6530
Show:
FEBI Multi-rib belt Powerband John Deere, Case IH, New Holland
FEBI
To fit as: John Deere More
To fit as: John Deere
€45,25 €37,40 €27,36 €22,61
You save 40%
FEBI Ribbed V-belt John Deere 5070M, 5080M, 5080R, 5090R, 5620
FEBI
Ribbed V-belt John Deere 5070M, 5080M, 5080R, 5090R, 5620 More
Ribbed V-belt John Deere 5070M, 5080M, 5080R, 5090R, 5620
€71,58 €59,16 €30,43 €25,15
You save 57%
FEBI Ribbed V-belt John Deere 5070M, 5080M, 5080R, 5090M, 5090R
FEBI
Ribbed V-belt John Deere 5070M, 5080M, 5080R, 5090M, 5090R More
Ribbed V-belt John Deere 5070M, 5080M, 5080R, 5090M, 5090R
€79,98 €66,10 €25,44 €21,02
You save 68%
FEBI Multi-rib belt with air conditioning system 8 ribs John Deere 5070M
€71,01 €58,69 €21,50 €17,77
You save 70%
Gear reduction starter 12 V, 3,2 kW, 10 teeth, Ø 82,5 mm, flange 32 mm
HELLA Starter motor 12 V, 3,0 kW, 11 teeth, clockwise, mounting Ø 89 mm
€533,07 €440,55 €428,55 €354,17
You save 20%
GRANIT Ball joint 145 mm, M22 x 1,5, M24 x 1,5, taper 24,65 - 28,53 mm
GRANIT
A: 145 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,65 mm. F: 28,53 mm. Taper: 24,65 - 28,53 mm. Tube Ø: 36 mm. More
A: 145 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,65 mm. F: 28,53 mm....
€60,06 €49,64 €57,00 €47,11
You save 5%
Ball joint 230 mm, taper 29 - 31 mm, M28 x 1,5 / M28 x 1,5
A: 230 mm. C: M28 x 1,5 mm. D: M28 x 1,5 mm. E: 29 mm. F: 31 mm. Taper: 29 - 31 mm. More
A: 230 mm. C: M28 x 1,5 mm. D: M28 x 1,5 mm. E: 29 mm. F: 31 mm. Taper...
€124,17 €102,62 €117,95 €97,48
You save 5%
GRANIT Seal cover brake cylinder John Deere
GRANIT Brake disc Ø 313 x 5,9 mm, 14 teeth Heavy Duty John Deere
€271,87 €224,69 €258,25 €213,43
You save 5%
GRANIT Brake disc Ø 313 x 4,9 mm, 14 teeth John Deere
€199,25 €164,67 €189,25 €156,41
You save 5%
Torsion damper John Deere 6130-6930PR with crawler gear
€1.166,97 €964,44 €1.108,60 €916,20
You save 5%
GRANIT Plain bearing bush torsion damper 30 x 34 x 16 mm John Deere
GRANIT
Inner Ø: 30 mm. Outer Ø: 34 mm. Length: 16 mm. More
Inner Ø: 30 mm. Outer Ø: 34 mm. Length: 16 mm.
€4,05 €3,35
GRANIT PTO shaft end piece 1 3/8 inch 6 and 21 splines, 540-540E-1000 rpm.
GRANIT
Version: 1 3/8", 6 grooves, 1 3/8", 21 grooves, 14 splines, Can be switched between 540/540E/1000 rpm. Reference no.: L173241. More
Version: 1 3/8", 6 grooves, 1 3/8", 21 grooves, 14 splines, Can be swi...
€194,40 €160,66 €184,65 €152,60
You save 5%
GRANIT Window rubber clamping range 4 - 6 mm, 23,2 x 14,5 mm - 25 meter
GRANIT
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm. More
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm.
€216,46 €178,89 €205,60 €169,92
You save 5%
Scharmüller Drawbar frame prepared draw pendulum 390/25/32 mm, 4000 kg, black
Scharmüller
suitable for: Fendt. Series: Favorit-Vario 900. Category: Bearing supports. Version: Prepared for drawbar. Colour: Black. D-value: 97,1 kN. Guide widt... More
suitable for: Fendt. Series: Favorit-Vario 900. Category: Bearing supp...
€1.586,80 €1.311,41
Dayco Powerband PK 8 ribs, 28,48 x 4,6 mm, 2523 mm heavy duty John Deere
Dayco
Width: 28,48 mm. Height: 4,6 mm. Length: 2523 mm. Profile: PK. Ribs: 8 n. Version: Heavy Duty. Additional information: For compressed air and air cond... More
Width: 28,48 mm. Height: 4,6 mm. Length: 2523 mm. Profile: PK. Ribs: 8...
€86,44 €71,44 €82,10 €67,85
You save 5%
GRANIT Belt kit air conditioning, belt tensioner and idler pulley, belt 2475 mm, 8 ribs
GRANIT
Version: With air conditioning but without compressed air system. Contents: Belt tensioner, idler pulley, belt. Belt length: 2475 mm. Ribs: 8 n. More
Version: With air conditioning but without compressed air system. Cont...
€475,93 €393,33 €452,10 €373,64
You save 5%
GRANIT Belt kit pulley and tensioning pulley with compressed air, without air conditioning, 2385 mm
GRANIT
Version: With compressed air but without air conditioning system (only with 90A, 115A and 120A alternator). Contents: Grooved pulley, belt tensioner, ... More
Version: With compressed air but without air conditioning system (only...
€653,02 €539,69 €620,35 €512,69
You save 5%
Borg Warner Cooling fan Ø 600 mm John Deere Series 6M-6920S, SE6020-7530 PR
€346,63 €286,47 €304,25 €251,45
You save 12%
VICTOR REINZ Cylinder head gasket engine 4039D/T, 4045D/T, 4202D, 4219D, 4239D/T, 4276
€57,35 €47,40 €54,45 €45,00
You save 5%
Showing 457 - 480 of 704

John Deere 6530 parts for engine servicing and work lights

More than 700 John Deere 6530 parts are listed on this page, which is a lot to scroll through, so here is where to start. On a tractor that clocks up long hours, the jobs tend to be routine engine work: belts, thermostat, sensors, gaskets and O-rings. Work lights, headlights and the hitch gear at the back come up regularly as well.

Around the engine

For the 6530 there are thermostats for the cooling system, sensors such as the engine oil pressure sender, gaskets including the one for the exhaust gas recirculation valve, and O-rings, for example for the oil pump. Alternators and micro relays complete the electrical side. A thermostat that sticks open keeps the engine from ever reaching proper temperature. You will notice the gauge barely moving in winter and fuel use creeping up.

Belts with or without air conditioning

Multi-rib belts and complete belt kits drive the alternator, water pump and air conditioning compressor. Before you order, check whether your 6530 has air conditioning. Belts for tractors with air conditioning come in a different length and with a different number of ribs. A belt meant for a tractor without it will not go round the pulleys, or the other way round it will run slack. Count the ribs on the old belt and note which pulleys it drives. If the tensioner feels rough, replace it while the belt is off.

Lights and hitch

If you work after dark, decent work lights matter. This page has spotlights, including HELLA, and left and right headlights. At the rear there are drawbar frames, drawbar balls and forced steering parts, Scharmüller among the makers. Gas struts for the cab and seals for door hinges and handles round things off. Parts also come from GRANIT, Sauermann and MAHLE.

Finding the part that matches your 6530

Start with the rating plate. The 6530 belongs to the 6030 series, where the models look almost identical from outside but parts are matched per model. With the old part in hand, look for a reference number. It is often cast in or printed on the part. If nothing is legible any more, compare the shape, connections and mounting points of the old part with the description.

The sister models each have their own page:

The 6534 is part of the same series. Other models from the brand are on the John Deere parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart