Menu
EUR

John Deere 6620 tractor parts & technical data

This page brings together more than 700 parts for the John Deere 6620 from the 6020/6020SE series, such as trailer couplings, lighting and electrics.

745 parts found for John Deere 6620
Show:
GRANIT Strainer airconditioningkoeler John Deere
GRANIT
Strainer airconditioningkoeler John Deere
€80,15 €66,24
 
Cooling fan Ø 600 mm John Deere 6020-7530
5%
Cooling fan Ø 600 mm John Deere 6020-7530
€285,49 €235,94 €271,20 €224,13
 
V-belt tensioner Ø 78 mm, width 31 mm John Deere
5%
V-belt tensioner Ø 78 mm, width 31 mm John Deere
€158,38 €130,89 €150,45 €124,34
 
Borg Warner Fan clutch John Deere 6020-6920
12%
Borg Warner
Fan clutch John Deere 6020-6920
€461,11 €381,08 €404,75 €334,50
 
Shim rocker arm shaft Ø 20,65 x 29,46 x 0,5 mm John Deere
Shim rocker arm shaft Ø 20,65 x 29,46 x 0,5 mm John Deere
Dimensions: Ø 20.65 x 29.46 x 0.5 mm.
€11,15 €9,21
 
GRANIT Pressure pipe 61 mm John Deere
5%
GRANIT
Pressure pipe 61 mm John Deere
Length: 61 mm. Description: To the injector.
€94,89 €78,42 €90,10 €74,46
 
Fuel hose of filter to fuel pump 1/2" UNF John Deere
Fuel hose of filter to fuel pump 1/2" UNF John Deere
Dimensions: Thread: 1/2" UNF mm. Description: From the filter to the injection p...
€19,95 €16,49
 
Spacer cylinder liner Ø 120,8 x 125,3 x 0,10 mm John Deere
Spacer cylinder liner Ø 120,8 x 125,3 x 0,10 mm John Deere
Ø: 120,8 x 125,3 x 0,10 mm.
€26,95 €22,27
 
Gasket oil cooler housing John Deere
Gasket oil cooler housing John Deere
€18,15 €15,00
 
GRANIT Sealing washer filler neck Ø 70 x 4,5 mm John Deere
GRANIT
Sealing washer filler neck Ø 70 x 4,5 mm John Deere
Dimensions: Ø 70 x 4.5 mm. Description: For filler neck.
€12,90 €10,66
 
Ball bearing fan drive Ø 25,4 x 47,6 x 70 mm John Deere
5%
Ball bearing fan drive Ø 25,4 x 47,6 x 70 mm John Deere
Ø: 25,4 x 47,6 x 70 mm. Shaft length: 123,5 mm. Description: For fan drive.
€91,51 €75,63 €86,90 €71,82
 
GRANIT Tensioning pulley Ø 78 / 31 mm John Deere 5070M-5100M, 6010-6920
5%
GRANIT
Tensioning pulley Ø 78 / 31 mm John Deere 5070M-5100M, 6010-6920
Outer Ø: 78 mm. Width: 31 mm. Menke no.: 221661.
€64,87 €53,61 €61,60 €50,91
 
Thermostat Ø 54 mm, 78 °C John Deere Series 5M-7405, SE6010-SE6920
Thermostat Ø 54 mm, 78 °C John Deere Series 5M-7405, SE6010-SE6920
Ø: 54 mm. Temperature: 78 °C.
€34,55 €28,55
 
GRANIT Radiator aluminum John Deere 6515, 6715, 6520-6920S
5%
GRANIT
Radiator aluminum John Deere 6515, 6715, 6520-6920S
To fit as: John Deere Series 6015: 6515, 6715; Series 6020/6020SE: 6520–6920S; S...
€1.442,11 €1.191,83 €1.370,00 €1.132,23
 
Showing 361 - 384 of 745

John Deere 6620 parts for the cooling system and beyond

By now most John Deere 6620 tractors have plenty of hours on the clock, and the jobs that come up reflect that: a sticking thermostat, a tired belt, a hose that has gone soft, a seal that weeps. This page lists more than 700 replacement parts that fit the 6620, from GRANIT, HELLA, ROCKINGER, Wabco and Sauermann.

Engine, cooling and belts

For the cooling system there are thermostats with the matching regulator housing gasket, radiator hoses and hose sold by the metre. The belt drive is covered by multi-rib belts and complete belt kits including a pulley. Alternators, an engine oil pressure sensor, O-rings for the oil pump and other seals are here too.

Replacing the thermostat properly

Fit a new gasket on the thermostat housing every time and never reuse the old one. Clean both mating faces thoroughly, since a scrap of old gasket left behind is enough to cause a slow drip. While the system is open, squeeze each radiator hose. If one feels hard and cracked, or soft and swollen, replace it in the same job. Bleed the cooling system after refilling and check the level again once the engine has cooled down.

Hitch, lights and clutch

At the rear there are automatic drawbars, drawbar frames and forced steering parts with a ball at both ends for steered trailers. Work lamps and external clutch plates complete the selection.

Belts and tensioners

A multi-rib belt that squeals on a cold start is either glazed or no longer properly tensioned. When you change it, spin the tensioner by hand, and if it feels rough, replace it at the same time. Whether the tractor has air conditioning or an air compressor decides which belt kit fits, so count the pulleys first.

Making sure it fits

The type plate on your 6620 gives the model and serial number. Engine parts such as the thermostat housing or alternator often carry a reference number as well, and that is what you compare with the product details. For O-rings and hoses, measuring the old part gives extra certainty.

The 6620 sits in the John Deere 6020 series. Each model in that range has a page of its own, handy if a second tractor on the farm needs parts: John Deere 6120, John Deere 6220, John Deere 6320, John Deere 6420, John Deere 6520 and John Deere 6820. Other Deere models on the farm can be found via John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart