Menu
EUR

John Deere 6630 tractor parts & technical data

With more than 650 matching parts, this is the overview for the John Deere 6630 from the 6030/6030PR series, covering trailer couplings, lighting and electrics.

684 parts found for John Deere 6630
Show:
AKS-Dasis Magnetic coupling airco 12 V, Ø 125 mm, poly-V 8 John Deere
AKS-Dasis
12 V Ø 125 mm Poly-V8 More
12 V Ø 125 mm Poly-V8
€389,21 €321,66 €358,07 €295,93
You save 8%
LUK Pilot bearing PTO shaft 45 x 75 x 16 mm Fendt, John Deere
€90,40 €74,71 €83,17 €68,73
You save 8%
Oil sump gasket John Deere engine 6068 Powertech 6.8 L
€31,75 €26,24
MAHLE Alternator 14 V, 90 A, fastening 56 / 10,2 / 90 mm Fendt, John Deere
MAHLE
Installation angle (°): l 60 | Mounting L / d / R (mm): 56,0 / 10,2 / 90,0 | Flange size (mm): 56,0 | Charging current (A): 90 | Form: B | Pulley Ø ... More
Installation angle (°): l 60 | Mounting L / d / R (mm): 56,0 / 10,2 /...
€472,24 €390,28 €282,84 €233,75
You save 40%
Alternator 14 V / 90 A, flange 2 x 56 mm
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | Pulley Ø (mm): - | Nominal voltage (V): 14 | Additional information: Compact al... More
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | ...
€255,27 €210,97 €234,85 €194,09
You save 8%
Alternator 14 V / 150 A, flange 56 mm
Nominal voltage (V): 14 | Flange size (mm): 56.0 | Form: B | Direction of rotation: ↻ | Mounting hole Ø / R (mm): 10.3 / 90.0 | Nominal values (V /... More
Nominal voltage (V): 14 | Flange size (mm): 56.0 | Form: B | Direction...
€293,13 €242,26 €269,68 €222,88
You save 8%
Alternator 14 V, 150 A, flange 55,8 mm
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (mm): 55,8 | Nominal voltage (V): 14 | Form: B | Pulley Ø (mm): - | Nominal value... More
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (m...
€215,54 €178,13 €198,30 €163,88
You save 8%
DANA Spicer King pin final drive front axle 740 John Deere 6020 - 6630
€112,98 €93,37 €103,94 €85,90
You save 8%
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 11,45 kg
Scharmüller
Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Co... More
Assembly notes: Anticlockwise | Description: Approved for steering for...
€636,37 €525,93 €585,46 €483,85
You save 8%
LED work lights floodlight 40 W, 108 x 77 mm
No. of LEDs: 4 x 10W | Form: Round | Menke no.: 228512 | Width (mm): 108 | Dimensions W x H x D (mm): 108 x 77 | Fixing: Screw fixing | Nominal voltag... More
No. of LEDs: 4 x 10W | Form: Round | Menke no.: 228512 | Width (mm): 1...
€66,47 €54,93 €61,15 €50,54
You save 8%
GRAMMER Tractor seat Maximo Dynamic Plus air suspended, 565 mm, John Deere
GRAMMER
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board voltage (V): 12 | Seat heater: Yes | Upholstery type: Fabric / new design | Fore/af... More
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board vol...
€5.303,07 €4.382,70 €4.928,82 €4.073,41
You save 7%
FEBI Hydraulic oil filter HF35474
€59,76 €49,39 €39,31 €32,49
You save 34%
Scharmüller Drawbar bracket 200 x 120 mm, bore M18, inner width 120 mm, black
Scharmüller
Hole pattern: 200 x 120 mm. Hole: M18 mm. Colour: Black. Internal width: 120 mm. Version: Brackets. Category: Drawbar. More
Hole pattern: 200 x 120 mm. Hole: M18 mm. Colour: Black. Internal widt...
€322,05 €266,16 €296,29 €244,86
You save 8%
Scharmüller Drawbar frame long 330/25/32, 2000 kg John Deere
Scharmüller
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Long. Colour: JD green. D-value: 91,3 kN. Guide width: 32 mm. Rail width:... More
suitable for: John Deere. Series: 6000. Category: Bearing supports. Ve...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Optibelt Multi-rib belt 8 ribs John Deere, Case IH, New Holland
€114,23 €94,41 €105,09 €86,85
You save 8%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€36,91 €30,50 €33,96 €28,06
You save 8%
GRAMMER Tractor seat Maximo Professional MSG95AL/731 air suspended
GRAMMER
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 530 mm. Joystick console: Optiona... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€3.917,46 €3.237,57
Sauermann Drawbar 38 mm, 330 / 25 / 32 mm, 2500 kg, 97,1 kN
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 97,1 kN. Colour: Black. Referenc... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.018,93 €842,09 €937,42 €774,72
You save 8%
GRAMMER Compressor 12 V MSG93, MSG95, MSG97 John Deere, Fendt, Massey Ferguson
GRAMMER
suitable for: MSG93, MSG95, MSG97. More
suitable for: MSG93, MSG95, MSG97.
€353,37 €292,04 €325,10 €268,68
You save 8%
GRAMMER Tractor seat air suspended Maximo COMFORT fabric, seat width 520 mm
GRAMMER
Comfort seat with air suspension and 12V compressor. Armrests height adjustable and folding. Mechanical lumbar support. Backrest tilt adjustment. Fore... More
Comfort seat with air suspension and 12V compressor. Armrests height a...
€1.234,76 €1.020,46
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustment, longitudinal adjustment and backrest tilt adjustment. Mechanical ... More
Air suspension with 12V compressor. Fore/aft isolator. Continuous heig...
€842,55 €696,32
Walterscheid Drawbar support M20, black, John Deere
Walterscheid
Colour: black | Description: Drawbar support that can be mounted securely in the direction of travel at the rear below the gearbox. More
Colour: black | Description: Drawbar support that can be mounted secur...
€638,58 €527,75 €504,86 €417,24
You save 21%
Plate Hi-Lo vane connection 4 mm, Ø 295 mm John Deere
Version: 4 mm, Ø 295 mm More
Version: 4 mm, Ø 295 mm
€70,35 €58,14 €64,72 €53,49
You save 8%
External plate thickness 2,2 mm, inner 100 mm, outer 146 mm
Version: Thickness: 2.2 mm Inner: 100 mm Outer: 146 mm More
Version: Thickness: 2.2 mm Inner: 100 mm Outer: 146 mm
€56,53 €46,72 €52,01 €42,98
You save 8%
Work lamp round H4, 12 V John Deere 6230 - 7530 PR
Bulb: H4 | Nominal voltage (V): 12 | Form: Round More
Bulb: H4 | Nominal voltage (V): 12 | Form: Round
€459,35 €379,63 €422,60 €349,26
You save 8%
Scharmüller Forced steering K50, 250 mm, both sides, black, 20,06 kg
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Both ends | Description: Approved for steering forces up to 20 kN (2 t) | Connecti... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Bo...
€1.222,48 €1.010,31 €1.124,68 €929,49
You save 8%
Scharmüller Forced steering K50, 250 mm, left, black, 12 kg John Deere
Scharmüller
Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm ... More
Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Descriptio...
€636,37 €525,93 €585,46 €483,85
You save 8%
Scharmüller Drawbar frame prepared for drawbar 89,3 kN, 3000 kg, rail 330 mm
Scharmüller
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Category: Bearing supports | Load capacity (kg): 3000 | Version: Prepared for drawba... More
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Cate...
€1.754,76 €1.450,21 €1.664,38 €1.375,52
You save 5%
O-ring 34,5 x 3,5 mm John Deere 5080 - 8530
Version: Ø 34,5 x 3,5 mm More
Version: Ø 34,5 x 3,5 mm
€6,79 €5,61
Piston Hi-Lo clutch 246 x 292 mm John Deere
Version: 246 x 292 mm More
Version: 246 x 292 mm
€127,79 €105,61
Internal plate Hi-Lo 3,3 mm, inner 113 mm, outer 285 mm, 54 teeth
Version: 285 x 113 x 3.3 mm, 54 splines More
Version: 285 x 113 x 3.3 mm, 54 splines
€124,79 €103,13 €114,81 €94,88
You save 8%
Internal plate Hi-Lo 5,16 mm, inner 219 mm, outer 292 mm, 87 teeth
Version: 292 x 219 x 5,16 mm 87 teeth More
Version: 292 x 219 x 5,16 mm 87 teeth
€97,35 €80,45 €89,56 €74,02
You save 8%
Sauermann Bolt lock with release John Deere 5070M - 8530
Sauermann
Description: With release More
Description: With release
€298,23 €246,47 €274,37 €226,75
You save 8%
Sauermann Coupling pin Ø 32 mm, geleidehuls 87 mm John Deere 6020 - 7530 PR
€325,63 €269,12 €299,58 €247,59
You save 8%
Sauermann Cast lid Ø 8,2 mm John Deere
€203,66 €168,31 €187,37 €154,85
You save 8%
External plate thickness 3,2 mm, inner 238 mm, outer 334 mm, 4 teeth
Version: Thickness: 3.2 mm Inner: 238 mm Outer: 334 mm 4 teeth More
Version: Thickness: 3.2 mm Inner: 238 mm Outer: 334 mm 4 teeth
€65,27 €53,94 €60,05 €49,63
You save 8%
Bearing torsion damper outer-Ø 34 mm, inner-Ø 30 mm John Deere
Outer Ø (mm): 34 | Hole Ø (mm): 12 | Inner Ø (mm): 30 More
Outer Ø (mm): 34 | Hole Ø (mm): 12 | Inner Ø (mm): 30
€93,64 €77,39 €86,15 €71,20
You save 8%
External plate thickness 3 mm, inner 138 mm, outer 215 mm
Version: thickness = 3 mm inner = 138 mm outer = 215 mm More
Version: thickness = 3 mm inner = 138 mm outer = 215 mm
€69,85 €57,73 €64,26 €53,11
You save 8%
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm More
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm
€113,18 €93,54 €104,13 €86,05
You save 8%
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer = 177,8 mm 6 teeth More
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer...
€49,85 €41,20 €45,86 €37,90
You save 8%
Aircon compressor 10PA15C 12 V, pulley Ø 120 mm, 8 grooves
No. of grooves: 8 | For compressor: 10PA15C | Nominal voltage (V): 12 | Suitable oil: PAG 46 | Refrigerant: R 134a | Oil quantity (ccm): 160 | Referen... More
No. of grooves: 8 | For compressor: 10PA15C | Nominal voltage (V): 12 ...
€647,38 €535,02 €595,59 €492,22
You save 8%
Exhaust pipe John Deere 6530 - 7530 PR
€123,50 €102,07 €113,62 €93,90
You save 8%
HELLA Alternator 14 V / 150 A, without belt pulley, 7,33 kg
HELLA
Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 150 | Charging current (A): 150 More
Nominal voltage (V): 14 | Additional information: Without pulley | Nom...
€749,79 €619,66 €577,70 €477,44
You save 23%
FEBI Engine oil filter Ø 92,96 mm, height 150,88 mm, thread M92 x 2,5
€29,97 €24,77 €19,21 €15,88
You save 36%
FEBI Alternator 14 V / 150 A, form B, flange 56,0 mm
FEBI
To fit as: Fendt, Hürlimann, Lamborghini, Same More
To fit as: Fendt, Hürlimann, Lamborghini, Same
€435,60 €360,00 €247,81 €204,80
You save 43%
Scharmüller Hitch support 330/25/32, 2000 kg, John Deere 6000-7000
Scharmüller
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Short. Colour: JD green. D-value: 91,3 kN. Guide width: 32 mm. Rail width... More
suitable for: John Deere. Series: 6000. Category: Bearing supports. Ve...
€664,98 €549,57
EGR valve John Deere 6230PR-6930PR, 7430PR, 7530PR
Reference no.: RE543308, RE537142, RE528473, RE532849, RE535293. More
Reference no.: RE543308, RE537142, RE528473, RE532849, RE535293.
€851,27 €703,53 €783,17 €647,25
You save 8%
Showing 97 - 144 of 684

John Deere 6630 parts for cooling, lighting and electrics

A John Deere 6630 that runs hot, or heads out at dusk with half its lights working, costs you time. For both problems this page has thermostats, headlights, work lamps and micro relays, as part of more than 650 parts for this tractor from the 6030 series.

When the temperature gauge misbehaves

If the gauge creeps up under heavy load, or the engine barely warms up at all, the thermostat is the first suspect. Replace it together with the housing gasket or seal, then top up the coolant slowly with the engine idling and the heater open, so no air stays trapped in the system. Gaskets are available for other points on the 6630 too, including the exhaust gas recirculation valve, and there are O-rings for the oil pump among others.

Lights and relays

When a whole group of lamps goes out at once, check the relay before the lamps. A micro relay swaps in seconds, and with a new one in your hand you know straight away if that was the fault. If the relay is fine, follow the wire to the lamp and look for a plug that has gone green with corrosion. Work lamps on the cab roof take a lot of rain and vibration, and that is where connections fail first. The headlights for left and right have dipped and main beam, and the work lamps include oval spotlights. A sensor for engine oil pressure belongs to the electrical parts on this page as well.

Rear end and cab

  • Drawbars, including ball hitches, and drawbar frames in John Deere green
  • Ball pieces for trailers with forced steering
  • Multi-rib belts and alternators for the charging circuit
  • Gas struts and tractor seats
  • Seals for door hinges and pull handles

The brands behind these parts are GRANIT, Sauermann, HELLA, Scharmüller and MAHLE. Every part is new and comes from these manufacturers, nothing used or reconditioned.

Check before you order

The data plate confirms that you have a 6630 in front of you. After that, the reference number on the old part is the safest comparison, especially with thermostats and sensors, which often look identical from the outside. The other models in the 6030 series each have a page of their own: John Deere 6230, John Deere 6430, John Deere 6830, John Deere 6930, John Deere 6130 and John Deere 6530. The 6534 is part of the series too. For everything from the brand, see John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart