Menu
EUR

John Deere 6820 tractor parts & technical data

Replacement parts for the John Deere 6820 from the 6020/6020SE series: more than 700 items for this model, including trailer couplings, lighting and electrics.

711 parts found for John Deere 6820
Show:
GRAMMER Tractor seat Maximo Dynamic Plus air suspended, 565 mm, John Deere
GRAMMER
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board voltage (V): 12 | Seat heater: Yes | Upholstery type: Fabric / new design | Fore/af... More
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board vol...
€5.303,07 €4.382,70 €4.928,82 €4.073,41
You save 7%
FEBI Hydraulic oil filter HF35474
€59,76 €49,39 €39,31 €32,49
You save 34%
Scharmüller Drawbar frame long 330/25/32, 2000 kg John Deere
Scharmüller
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Long. Colour: JD green. D-value: 91,3 kN. Guide width: 32 mm. Rail width:... More
suitable for: John Deere. Series: 6000. Category: Bearing supports. Ve...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€36,91 €30,50 €33,96 €28,06
You save 8%
GRAMMER Tractor seat Maximo Professional MSG95AL/731 air suspended
GRAMMER
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 530 mm. Joystick console: Optiona... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€3.917,46 €3.237,57
Sauermann Drawbar 38 mm, 330 / 25 / 32 mm, 2500 kg, 97,1 kN
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 97,1 kN. Colour: Black. Referenc... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.018,93 €842,09 €937,42 €774,72
You save 8%
Walterscheid Drawbar support M20, black, John Deere
Walterscheid
Colour: black | Description: Drawbar support that can be mounted securely in the direction of travel at the rear below the gearbox. More
Colour: black | Description: Drawbar support that can be mounted secur...
€638,58 €527,75 €504,86 €417,24
You save 21%
Expander Repair bolt front axle suspension Ø 30 mm, 138 mm, M16 x 1,5 John Deere
Expander
H (mm): 19 | To fit: John Deere | Splayed dimensions (mm): 0 - 2 | A (mm): 138 | C (mm): 47,02 | Ø F (mm): M16 x 1,5 | Type: Special version | G (mm)... More
H (mm): 19 | To fit: John Deere | Splayed dimensions (mm): 0 - 2 | A (...
€575,31 €475,46
Plate Hi-Lo vane connection 4 mm, Ø 295 mm John Deere
Version: 4 mm, Ø 295 mm More
Version: 4 mm, Ø 295 mm
€70,35 €58,14 €64,72 €53,49
You save 8%
ZF Pivot pin front axle 4475006011 Fendt, John Deere
€153,31 €126,70 €141,05 €116,57
You save 8%
Scharmüller Drawbar frame prepared for drawbar 89,3 kN, 3000 kg, rail 330 mm
Scharmüller
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Category: Bearing supports | Load capacity (kg): 3000 | Version: Prepared for drawba... More
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Cate...
€1.754,76 €1.450,21 €1.664,38 €1.375,52
You save 5%
Wabco Pressure regulator afblaasdruk 7,3 bar, safety valve 12 bar, M22 x 1,5
Wabco
Control range: 0,6 +0,4 | Safety valve opening pressure (bar): 12 +2 | Pressure regulator cut-off pressure (bar): 7,3 ±0,2 | Connection: M22 x 1,5 More
Control range: 0,6 +0,4 | Safety valve opening pressure (bar): 12 +2 |...
€625,38 €516,84 €575,35 €475,50
You save 8%
Wabco Quick exhaust valve M22 x 1,5, 12 bar, with double non-return valve
Wabco
Operating pressure max. (bar): 12 | Fixing: 2 holes Ø 9.5 mm | To fit: Including - EVOBUS - MERCEDES-BENZ | Inlet connection: 1: M22 x 1,5 | Version:... More
Operating pressure max. (bar): 12 | Fixing: 2 holes Ø 9.5 mm | To fit...
€65,78 €54,36 €60,52 €50,01
You save 8%
Wabco Pressure relief valve 20 bar, inschakeldruk 16 bar, M16 x 1,5
Wabco
Operating pressure max. (bar): 20 | Fixing: Hole Ø 8.2 x 57 mm | Opening pressure (bar): p2 + 2,5 | Output pressure (bar): 7,4 + 0,2 | Inlet connecti... More
Operating pressure max. (bar): 20 | Fixing: Hole Ø 8.2 x 57 mm | Open...
€257,83 €213,08 €237,20 €196,04
You save 8%
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M12 x 1,5, standard open
€353,16 €291,87 €324,91 €268,52
You save 8%
Wabco Trailer control valve mineral oil 0-1 bar, final pressure 20 bar, 2 m³
Wabco
End pressure (bar): 20 | Set pressure (bar): 0-1 | Displacement (m³): 2 More
End pressure (bar): 20 | Set pressure (bar): 0-1 | Displacement (m³):...
€1.905,32 €1.574,64 €1.752,89 €1.448,67
You save 8%
O-ring 34,5 x 3,5 mm John Deere 5080 - 8530
Version: Ø 34,5 x 3,5 mm More
Version: Ø 34,5 x 3,5 mm
€6,79 €5,61
Piston Hi-Lo clutch 246 x 292 mm John Deere
Version: 246 x 292 mm More
Version: 246 x 292 mm
€127,79 €105,61
Internal plate Hi-Lo 3,3 mm, inner 113 mm, outer 285 mm, 54 teeth
Version: 285 x 113 x 3.3 mm, 54 splines More
Version: 285 x 113 x 3.3 mm, 54 splines
€124,79 €103,13 €114,81 €94,88
You save 8%
Internal plate Hi-Lo 5,16 mm, inner 219 mm, outer 292 mm, 87 teeth
Version: 292 x 219 x 5,16 mm 87 teeth More
Version: 292 x 219 x 5,16 mm 87 teeth
€97,35 €80,45 €89,56 €74,02
You save 8%
Sauermann Bolt lock with release John Deere 5070M - 8530
Sauermann
Description: With release More
Description: With release
€298,23 €246,47 €274,37 €226,75
You save 8%
Sauermann Coupling pin Ø 32 mm, geleidehuls 87 mm John Deere 6020 - 7530 PR
€325,63 €269,12 €299,58 €247,59
You save 8%
Sauermann Cast lid Ø 8,2 mm John Deere
€203,66 €168,31 €187,37 €154,85
You save 8%
DANA Spicer Synchro unit, complete main shaft Powr- / Command quad John Deere
DANA Spicer
Reference no.: RE286934 More
Reference no.: RE286934
€656,10 €542,23 €603,61 €498,85
You save 8%
External plate thickness 2 mm, inner 134 mm, outer 184 mm, 4 teeth
Version: Thickness: 2 mm Inner: 134 mm Outer: 184 mm 4 teeth More
Version: Thickness: 2 mm Inner: 134 mm Outer: 184 mm 4 teeth
€43,75 €36,16 €40,25 €33,26
You save 8%
External plate thickness 3,2 mm, inner 238 mm, outer 334 mm, 4 teeth
Version: Thickness: 3.2 mm Inner: 238 mm Outer: 334 mm 4 teeth More
Version: Thickness: 3.2 mm Inner: 238 mm Outer: 334 mm 4 teeth
€65,27 €53,94 €60,05 €49,63
You save 8%
External plate thickness 10 mm, inner 238 mm, outer 347 mm, 4 teeth
Version: Thickness: 10 mm Inner: 238 mm Outer: 347 mm 4 teeth More
Version: Thickness: 10 mm Inner: 238 mm Outer: 347 mm 4 teeth
€128,47 €106,17 €118,19 €97,68
You save 8%
Bearing torsion damper outer-Ø 34 mm, inner-Ø 30 mm John Deere
Outer Ø (mm): 34 | Hole Ø (mm): 12 | Inner Ø (mm): 30 More
Outer Ø (mm): 34 | Hole Ø (mm): 12 | Inner Ø (mm): 30
€93,64 €77,39 €86,15 €71,20
You save 8%
External plate thickness 3 mm, inner 138 mm, outer 215 mm
Version: thickness = 3 mm inner = 138 mm outer = 215 mm More
Version: thickness = 3 mm inner = 138 mm outer = 215 mm
€69,85 €57,73 €64,26 €53,11
You save 8%
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm More
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm
€113,18 €93,54 €104,13 €86,05
You save 8%
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer = 177,8 mm 6 teeth More
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer...
€49,85 €41,20 €45,86 €37,90
You save 8%
Aircon compressor 10PA15C 12 V, pulley Ø 120 mm, 8 grooves
No. of grooves: 8 | For compressor: 10PA15C | Nominal voltage (V): 12 | Suitable oil: PAG 46 | Refrigerant: R 134a | Oil quantity (ccm): 160 | Referen... More
No. of grooves: 8 | For compressor: 10PA15C | Nominal voltage (V): 12 ...
€647,38 €535,02 €595,59 €492,22
You save 8%
Valve cover gasket John Deere 6505 - 7810, WTS 9540 - 9580
€51,06 €42,20 €46,98 €38,82
You save 8%
Getriebegeschwindigkeitssensor Hall sensor John Deere 6150M - 8410T
€176,90 €146,20 €162,75 €134,50
You save 8%
Speed sensor John Deere 6150M, 6820 - 6920S, SE6920
Version: Geschwindigkeitssensor More
Version: Geschwindigkeitssensor
€181,95 €150,37 €167,39 €138,34
You save 8%
HELLA Alternator 14 V / 150 A, without belt pulley, 7,33 kg
HELLA
Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 150 | Charging current (A): 150 More
Nominal voltage (V): 14 | Additional information: Without pulley | Nom...
€749,79 €619,66 €577,70 €477,44
You save 23%
DANA Spicer King pin final drive front axle 755
€114,51 €94,64 €105,35 €87,07
You save 8%
FEBI Ribbed V-belt John Deere 6820, 6920, 6920S, 6325, 6425, 6330
FEBI
Ribbed V-belt John Deere 6820, 6920, 6920S, 6325, 6425, 6330 More
Ribbed V-belt John Deere 6820, 6920, 6920S, 6325, 6425, 6330
€52,97 €43,78 €18,97 €15,68
You save 64%
FEBI Thermostat Ø 54 mm, 82 °C John Deere, Sabre
FEBI
To fit as: John Deere, Sabre. Tractor types: 4520, 4620, 3030, 3130 (from 235170), 4430, 4630, 3040, 3140, 3640, 4040S, 4240, 4240S, 4440, 4640, 4840,... More
To fit as: John Deere, Sabre. Tractor types: 4520, 4620, 3030, 3130 (f...
€24,08 €19,90 €11,17 €9,23
You save 54%
FEBI Engine oil filter Ø 92,96 mm, height 150,88 mm, thread M92 x 2,5
€29,97 €24,77 €19,21 €15,88
You save 36%
FEBI Alternator 14 V / 150 A, form B, flange 56,0 mm
FEBI
To fit as: Fendt, Hürlimann, Lamborghini, Same More
To fit as: Fendt, Hürlimann, Lamborghini, Same
€435,60 €360,00 €247,81 €204,80
You save 43%
Axial joint A 208 mm, C M22 x 1,5, D M24 x 1,5, Ø B 56 mm, Ø E 50 mm
A: 208 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 38 °. Ø B: 56 mm. Ø E: 50 mm. More
A: 208 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 38 °. Ø B: 56 mm. Ø...
€57,44 €47,47 €52,84 €43,67
You save 8%
Brake disc outer-Ø 179 mm, inner-Ø 103 mm, 3,5 mm thick, 35 teeth
Hollow shaft PTO shaft 540 / 540E / 1.000 rpm. John Deere 6820-6920S
Version: Can be switched between 540/540E/1000 rpm. More
Version: Can be switched between 540/540E/1000 rpm.
€433,46 €358,23 €398,78 €329,57
You save 8%
Scharmüller Drawbar frame standard 330/25/32 mm, 2000 kg, JD green John Deere
Scharmüller
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Standard. Colour: JD green. D-value: 91,3 kN. Guide width: 32 mm. Rail wi... More
suitable for: John Deere. Series: 6000. Category: Bearing supports. Ve...
€1.074,22 €887,79 €1.038,28 €858,08
You save 3%
Scharmüller Hitch support 330/25/32, 2000 kg, John Deere 6000-7000
Scharmüller
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Short. Colour: JD green. D-value: 91,3 kN. Guide width: 32 mm. Rail width... More
suitable for: John Deere. Series: 6000. Category: Bearing supports. Ve...
€664,98 €549,57
Top link bracket John Deere
Brand: John Deere. More
Brand: John Deere.
€33,12 €27,37 €30,47 €25,18
You save 8%
Showing 97 - 144 of 711

John Deere 6820 parts for the engine, cooling system and hitch

Coolant temperature creeping up or oil weeping from the thermostat housing are typical jobs on a 6820 that has done its hours. This page lists more than 700 John Deere 6820 parts, and a good share of them sit in or around the engine: thermostats, radiator hoses, the gasket for the regulator housing and O-rings such as the one for the oil pump. Alternators and engine sensors, including the oil pressure sensor, cover the electrical side.

Getting the diagnosis right first

If the oil pressure warning comes on while the engine sounds healthy, check the actual pressure with a mechanical gauge before replacing anything. When the reading is fine, the sender or its wiring is at fault. When fitting a new thermostat, always use a fresh housing gasket and bleed the cooling system properly afterwards. An air pocket at the thermostat produces exactly the same symptoms as a stuck one, so a careful bleed saves you a second strip-down.

The external plates for the ZF front axle are easy to overlook. When the front axle judders or clicks on tight turns, worn plates are a common cause. Replace them as a complete set and refill with the oil specified for that axle, or the noises will come back.

Hitching, cab and driveline

At the rear of the 6820, the parts cover drawbar balls, drawbar frames in John Deere green and forced steering parts for steered trailers, from ROCKINGER and Sauermann as well as GRANIT. For the cab there are gas struts and HELLA work lamps, and for the driveline universal joints and hose sold by the metre. Wabco is one of the brands too.

A universal joint on its way out usually announces itself with a clunk when pulling away. Grip the shaft with both hands and twist the halves against each other. Any play in the cross means it is time for a new one, before the bearing cups wear the yoke.

Matching the part to your tractor

Start with the type plate to confirm you are working on a 6820 and not a neighbouring model from the same series. If the old part is still fitted, look for a reference number stamped or printed on it. On alternators compare the flange and mounting, on sensors the connector and thread.

Each of the other models in the 6020 series has its own page listing the parts assigned to that model: the John Deere 6620, John Deere 6520, John Deere 6420, John Deere 6320, John Deere 6220 and John Deere 6120. For everything across the brand, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart