Menu
EUR

John Deere 7250R tractor parts & technical data

Your John Deere 7250R from the 7R series has its own page here with more than 120 parts, including trailer couplings, lighting and electrics.

129 parts found for John Deere 7250R
Show:
Thrust bearing standard John Deere
€115,90 €95,79 €106,63 €88,12
You save 8%
ROCKINGER Ball hitch rail width 390 mm, 4000 kg, 100 kN, John Deere green
ROCKINGER
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. Colour: JD green. D-value: 100 kN. More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.539,15 €1.272,02 €1.235,89 €1.021,40
You save 20%
ROCKINGER Clutch carrier 390 mm, 2000 kg, black
ROCKINGER
Colour: Black. Load capacity: 2000 kg. More
Colour: Black. Load capacity: 2000 kg.
€782,96 €647,07 €754,06 €623,19
You save 4%
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 70 mm, 500 mm, bore 25 mm
Scharmüller
suitable for: John Deere. Series: 7R (Tier 3). Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Dimensions: shaft height x width: 60... More
suitable for: John Deere. Series: 7R (Tier 3). Category: Pick-up hitch...
€1.858,60 €1.536,03 €1.532,25 €1.266,32
You save 18%
HELLA Work lamp flood beam HB3 60 W, 174 x 122 x 120 mm, 12 V, upright
HELLA
Bulb: HB3. Bulbs included: Yes. Light function: Close-range illumination. Installation location: Universal. Dimensions W x H x D: 174 x 122 x 120 mm. ... More
Bulb: HB3. Bulbs included: Yes. Light function: Close-range illuminati...
€86,49 €71,48 €83,29 €68,84
You save 4%
LED work lights spotlight 6000 lm, 70 W, 173 x 129 x 56 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€67,93 €56,14 €62,50 €51,65
You save 8%
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€37,38 €30,89
Rail pressure sensor John Deere
€306,82 €253,57 €282,27 €233,28
You save 8%
Bush camshaft Ø 55,88 x 59,87 x 38,9 mm John Deere
€47,11 €38,93 €43,34 €35,82
You save 8%
Gasket AdBlue injection unit John Deere 6MC, 6RC
Description: for AdBlue injection unit. More
Description: for AdBlue injection unit.
€13,96 €11,54
V-belt tensioner Ø 75 mm, 40 mm wide, 24,5 Nm John Deere
€272,97 €225,60 €251,13 €207,55
You save 8%
Sauermann Drawbar ball 80 sliding bolt, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Sauermann
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 31,4 mm. Load capacity: 4000 kg. Colour: Black. D-value: 120 kN. Version: Sliding bolt. Lock: b... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 31,4 mm. Load c...
€1.648,88 €1.362,71 €1.566,97 €1.295,02
You save 5%
ROCKINGER Support plate System 80 forced steering, ball K50, 930 x 180 mm
ROCKINGER
Lock: ball 80. Load capacity: 4500 kg. D-value: 100 kN. Length: 930 mm. Width: 180 mm. Thickness: 50 mm. Number of heart pins: 1. Heart pin Ø: 32,5 m... More
Lock: ball 80. Load capacity: 4500 kg. D-value: 100 kN. Length: 930 mm...
€2.815,68 €2.327,01 €2.219,43 €1.834,24
You save 21%
ROCKINGER Forced steering right K50
ROCKINGER
Lock: K50. Assembly notes: Right. To fit: For hitch support with lateral preparation for forced steering. More
Lock: K50. Assembly notes: Right. To fit: For hitch support with later...
€419,19 €346,44 €322,98 €266,93
You save 23%
AdBlue injection unit John Deere 6M, 6R, 7R, 6MC, 6RC
€740,66 €612,12 €681,41 €563,15
You save 8%
Filler cap for expansion tank, opening pressure 1,13 bar
Version: for expansion tank. Opening pressure: 1,13 bar. More
Version: for expansion tank. Opening pressure: 1,13 bar.
€55,86 €46,16
Main bearing standard John Deere
€46,65 €38,55 €42,92 €35,47
You save 8%
Injector John Deere 7210R-7290R, 8235R-8295R
€748,43 €618,54 €688,56 €569,05
You save 8%
GRANIT rear-view mirror, interior John Deere Series 6M-9620RX
€39,65 €32,77 €36,48 €30,15
You save 8%
Mirror 305 x 215 mm, heated, 12 V, electric adjustment
Dimensions: 305 x 215 mm. Height: 305 mm. Width: 215 mm. Version: Heated. Operating voltage: 12 V. Notes: Electric adjustment. More
Dimensions: 305 x 215 mm. Height: 305 mm. Width: 215 mm. Version: Heat...
€217,87 €180,06 €200,44 €165,65
You save 8%
Sauermann Forced steering left ball-Ø 50 mm, 69 x 50/80 mm John Deere
Sauermann
Assembly notes: Anticlockwise. Colour: Green. Hole pattern: 69 x 50/80 mm. Ball Ø: 50 mm. More
Assembly notes: Anticlockwise. Colour: Green. Hole pattern: 69 x 50/80...
€953,29 €787,84 €877,03 €724,82
You save 8%
Sauermann Forced steering right ball-Ø 50 mm, 69 x 50/80 mm John Deere
Sauermann
Assembly notes: Right. Colour: Green. Hole pattern: 69 x 50/80 mm. Ball Ø: 50 mm. More
Assembly notes: Right. Colour: Green. Hole pattern: 69 x 50/80 mm. Bal...
€946,52 €782,25 €870,80 €719,67
You save 8%
Scharmüller Drawbar frame HVLB K80 W390 S32, 120,2 kN, 4000 kg
Scharmüller
suitable for: John Deere. Series: 7R (Tier 3). Category: Bearing supports. Version: Standard. Colour: JD green. D-value: 120,2 kN. Guide width: 32 mm.... More
suitable for: John Deere. Series: 7R (Tier 3). Category: Bearing suppo...
€3.816,95 €3.154,50 €3.561,59 €2.943,46
You save 7%
Oil pressure switch transmission oil pressure
Version: Transmission oil pressure. More
Version: Transmission oil pressure.
€181,19 €149,74 €166,69 €137,76
You save 8%
ROCKINGER Drawbar automatic 48,7 mm, 390 / 25 / 32 mm, 2000 kg, 93,6 kN
€3.095,11 €2.557,94 €2.434,74 €2.012,18
You save 21%
LED work lights floodlight 3480 lm, 25 W, 12 / 24 V John Deere
Light colour (K): 5.700 - 6.500 | Current (A): 2,08A@12V; 1,04A@24V | Dimensions W x H x D (mm): 178 x 87 x 86 | Voltage range (V): 10 - 30 | EMC: CIS... More
Light colour (K): 5.700 - 6.500 | Current (A): 2,08A@12V; 1,04A@24V | ...
€83,08 €68,66 €76,43 €63,17
You save 8%
Universal joint 35 x 96,8 mm, maintenance-free
A: 35 mm. B: 96,8 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 35 mm. B: 96,8 mm. Universal joint size: . Lubrication system: Main...
€117,48 €97,09 €108,08 €89,32
You save 8%
Single-cylinder compressor John Deere 7200R-7310R
€1.737,87 €1.436,26 €1.598,84 €1.321,36
You save 8%
ROCKINGER Drawbar nose weight 1000 / 3000 kg, D-value 89,3 kN, John Deere green
ROCKINGER
Load capacity: 1000 / 3000 kg. D-value: 89,3 kN. Colour: John Deere green. More
Load capacity: 1000 / 3000 kg. D-value: 89,3 kN. Colour: John Deere gr...
€1.450,40 €1.198,68
Borg Warner Fan clutch John Deere 7250R-7310R, 7R250-7R350
€1.414,78 €1.169,24 €1.352,41 €1.117,69
You save 4%
Tensioning pulley Ø 75 mm, width 40 mm John Deere
€83,36 €68,89 €76,69 €63,38
You save 8%
NOX sensor after SCR catalytic converter 915 mm John Deere
To fit: John Deere. Installation location: After SCR catalytic converter. Cable length: 915 mm. More
To fit: John Deere. Installation location: After SCR catalytic convert...
€537,48 €444,20 €494,48 €408,66
You save 8%
AdBlue-filter Fendt, John Deere, Massey Ferguson
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no.: P956170. Fleetguard no.: UF101. Hifi no.: SD70380. Hengst no.: E103UD295. More
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no....
€59,17 €48,90 €54,44 €44,99
You save 8%
Showing 49 - 96 of 129

John Deere 7250R parts from the engine to the hitch

Hitches are only part of the story on the 7250R. Among the more than 120 parts that fit the John Deere 7250R you will also find components from deep inside the engine, such as injectors, sleeves, main bearings and thrust bearings. You will find parts made by GRANIT, Scharmüller, ROCKINGER, Sauermann and Walterscheid on this page.

Engine work

When replacing an injector, always fit a new copper sealing washer and new O-rings, even if the old ones still look fine. Clean the injector seat in the cylinder head thoroughly before the new injector goes in, or compression will leak past it. Fuel system O-rings for the 7250R are available separately.

Main bearings and thrust bearings come into play during an overhaul. The thrust bearings set how far the crankshaft can move lengthways, so measure that end float before stripping the engine and again after assembly. Temperature sensors and radiator hoses, such as the top hose, complete the engine side. Replace the hose clamps at the same time, and only open the cooling system once the engine has cooled down.

Work lights

LED work lights, including an oval floodlight, make night work far easier. Mount them on a rigid bracket, because a lamp that shakes with the cab ends up lighting the sky.

Hitching up at the rear

For the back of the tractor there are drawbar frames, support plates, drawbars, adapter plates and connector heads for the air brakes. Forced steering, for example an insert for the pick-up hitch, is what you need for trailers with steered axles. Check the support plate and the lock every time you change trailers.

A connector head that is stiff to turn or sticks when you uncouple is usually dirty or dry inside. Blow it out with compressed air, check the rubber seal and replace the head if the rubber has split. On the road, a leaking head only shows itself when the trailer starts braking poorly.

Choosing the right part

Read the type plate first so you know for sure it is a 7250R. Then look for the reference number on the old part. With injectors and bearings, that number is the only reliable way to pick the correct replacement.

The 7250R is part of the John Deere 7R series. The other models in that range each have their own page, handy for contractors running several 7R tractors:

The whole brand is under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart