Menu
EUR

John Deere 7530 tractor parts & technical data

John Deere 7530 owners can pick from more than 500 parts here. Trailer couplings, lighting and electrics lead the range for the 7030 and 7030PR series.

538 parts found for John Deere 7530
Show:
BOSCH Wiper blade left / center / right 600 mm, 24 inch
BOSCH
Length: 600 mm. Length: 24 inches. Version: Left/centre/right. Part no.: N 63. Reference no.: 3397018966. OEM no.: 3397018966. More
Length: 600 mm. Length: 24 inches. Version: Left/centre/right. Part no...
€27,95 €23,10
GRANIT Button fastening side panel John Deere
GRANIT Sensor hijsbediening John Deere Series 5M-7530 PR, Se 6010-6930 PR
GRANIT
Version: Hubwerksregelung. More
Version: Hubwerksregelung.
€105,90 €87,52
Sealing strip - 6,5 meter John Deere Series 6M-7530 PR
€64,54 €53,34 €58,35 €48,22
You save 10%
Scharmüller Pick-Up Hitch einsätze 80 shank 45 x 70 mm, bore 25 mm John Deere
Scharmüller
Shaft cross section W x H: 45 x 70 mm. Overhang: 390 mm. D-value: 86,1 kN. Hole spacing: 150 mm. Load capacity: 3000 kg. Hole: 25 mm. Length: 469 mm. ... More
Shaft cross section W x H: 45 x 70 mm. Overhang: 390 mm. D-value: 86,1...
€1.602,71 €1.324,55 €1.349,90 €1.115,62
You save 16%
Bush John Deere 6830 PR - 7530 PR
Reference no.: L165873. More
Reference no.: L165873.
€34,00 €28,10
Radial gasket clamp position sensor linkage John Deere
Version: Position sensor, power lift. More
Version: Position sensor, power lift.
€22,50 €18,60
GRANIT Plug hood John Deere
€5,50 €4,55
Sauermann Forced steering left cranked downwards, ball-Ø 50 mm
Sauermann
Assembly notes: Anticlockwise. Hole Ø: 25 mm. Colour: Green. Hole pattern: 110 x 65 mm. Ball Ø: 50 mm. More
Assembly notes: Anticlockwise. Hole Ø: 25 mm. Colour: Green. Hole pat...
€1.101,87 €910,64 €1.046,75 €865,08
You save 5%
GRANIT Sensor speed PTO shaft front and rear
GRANIT
Version: For front and rear PTO shaft. More
Version: For front and rear PTO shaft.
€90,56 €74,84 €81,90 €67,69
You save 10%
GRANIT Oil pressure switch transmission oil pressure
GRANIT
Version: Transmission oil pressure. More
Version: Transmission oil pressure.
€173,63 €143,50 €164,90 €136,28
You save 5%
GRANIT Oil pressure switch transmission oil pressure
GRANIT
Version: Transmission oil pressure. More
Version: Transmission oil pressure.
€138,06 €114,10 €131,15 €108,39
You save 5%
GRANIT Start switch without key and nut, blade connection
GRANIT
Version: With blade terminal Circuit:, 0: off, 1: consumer, 2: preheat, 3: start, Key 640RE183935, nut 640R44342. More
Version: With blade terminal Circuit:, 0: off, 1: consumer, 2: preheat...
€77,00 €63,64 €69,65 €57,56
You save 10%
HELLA Replacement cover orange with optics, test mark E4 6509 ECE
HELLA
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional information: • With pattern. More
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional informati...
€42,40 €35,04
HELLA Work lamp flood beam H3 55 W, 110 x 120 x 103 mm, 12 / 24 V, hanging
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installation location: Universal. Dimensions W x H x D: 110 x 120 x 103 mm. Mo... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€63,96 €52,86
HELLA Step tread light LED 12 / 24 V, 2 LEDs white, 150 mm cable
HELLA
Connection: 2-pin Packard connection. Form: Rectangular, short sides rounded. Protection class: 6K6 / 6K9K. Nominal voltage: 12 / 24 V. No. of LEDs: 2... More
Connection: 2-pin Packard connection. Form: Rectangular, short sides r...
€30,30 €25,04
GRANIT Micro relays changeover contact 12 V / 15 - 25 A, 5-pin, without bracket
GRANIT
Version: 12 V / 15 - 25 A, Without bracket, 5-pin, blade terminal. More
Version: 12 V / 15 - 25 A, Without bracket, 5-pin, blade terminal.
€7,40 €6,12
Cobo Micro relays changeover contact 12 V / 20 A, 5-pin, without bracket
Cobo
Version: 12 V / 20 A, Without bracket, 5-pin,. More
Version: 12 V / 20 A, Without bracket, 5-pin,.
€16,90 €13,97
HELLA Relays changeover contact 12 V, 30 - 40 A, 5-pin, 6,3 mm
HELLA
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 ...
€13,45 €11,12
Sensor air conditioning temperature sensor
Version: Temperature sensor. More
Version: Temperature sensor.
€104,30 €86,20 €99,00 €81,82
You save 5%
Showing 337 - 360 of 538

John Deere 7530 parts: electrics, engine and cab

An oil pressure warning on a John Deere 7530 should never be ignored, but it is not always the engine. The sender can fail too. This page lists more than 500 parts for the 7530, including engine oil pressure sensors, alternators, micro relays and work lamps from HELLA among other brands.

Check before you change the sensor

When the oil pressure light comes on, stop the engine and check the oil level first. If that is fine, fit a mechanical test gauge in place of the sensor and start the engine briefly. Good pressure on the gauge means the sensor or its wiring is at fault. Low pressure means the problem is inside the engine, and a new sensor will only hide it. Clean the connector and check the earth before you blame the part.

Seals, cab and transmission

  • O-rings for the oil pump and other O-rings
  • Gaskets, including one for the exhaust gas recirculation valve
  • Seals for door hinges and pull handles
  • Gas struts for the door and cab hinges
  • Internal and external plates and bushes

At the back of the tractor

For towing there are ball drawbars, drawbar frames in John Deere green and forced steering for trailers with a steered axle. Sauermann, Walterscheid and Scharmüller are among the makers here, next to GRANIT.

Finding the part that fits

The type plate on your tractor shows the model and serial number, which is the first thing to check. Read the reference number off the part you are replacing and compare it with the number listed for each product. When rebuilding a clutch pack, count the internal and external plates as you take them out so you can order the right quantity.

Rebuilding a clutch pack

Soak new friction plates in the oil the transmission will run on before fitting them, so the lining is fully wet. Renew internal and external plates as a set, keep them in the same order as the old pack and check the steel plates for heat marks or distortion. A blued or warped steel plate will spoil a new set quickly. If draughts or a door that will not stay open are bothering you, the cab door gas strut, the hinges and the hinge seals are covered as well.

Other tractors in the 7030 series

The 7530 shares its series with other models, each on a page of its own: the John Deere 7430 and the John Deere 7730. The 7830 also belongs to this series. Check each tractor on its own page before ordering. Parts for the rest of the Deere line-up sit under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart