Menu
EUR

John Deere 8100 tractor parts & technical data

With more than 350 parts, the John Deere 8100 is well covered. Lighting, trailer couplings and electrics for the 8000/8000T series are gathered on this page.

343 parts found for John Deere 8100
Show:
HELLA Lens yellow / red P21/5W, P21W, 12 V left / right
HELLA
Bulb: P21/5W / P21W. Colour: Yellow, red. Installation location: Right, left. Nominal voltage: 12 V. Test mark: E1 02350 / E1 63255. Light function: W... More
Bulb: P21/5W / P21W. Colour: Yellow, red. Installation location: Right...
€49,62 €41,01 €38,01 €31,41
You save 23%
GRANIT Work lamp halogen 50 W, 12 V, square, open cable ends
GRANIT
Bulb: Halogen. Form: Rectangular. Power consumption: 50 W. Bulbs included: -. More
Bulb: Halogen. Form: Rectangular. Power consumption: 50 W. Bulbs inclu...
€92,34 €76,31 €83,50 €69,01
You save 10%
Bracket
€118,53 €97,96 €107,20 €88,60
You save 10%
Work lamp angular front 12 V, bulbs included
Form: Rectangular. Installation location: Front. Nominal voltage: 12 V. Additional information: Bulbs not interchangeable. Bulbs included: Yes. More
Form: Rectangular. Installation location: Front. Nominal voltage: 12 V...
€37,13 €30,69 €33,55 €27,73
You save 10%
GRANIT Temperature sensor thermostat housing M14 x 1,5, 40-100 °C
GRANIT
Version: Thermostat housing M14 x 1.5 | Max. 100. Thread: M14 x 1.5. Temperature: 40 - 100 °C. More
Version: Thermostat housing M14 x 1.5 | Max. 100. Thread: M14 x 1.5. T...
€56,53 €46,72 €53,70 €44,38
You save 5%
Temperature sensor inlet manifold, thread M10 x 1, 40-100 °C
Version: Intake manifold M10 x 1 | Up to max. 100. Connection: -. Thread: M10 x 1. Temperature: 40 - 100 °C. More
Version: Intake manifold M10 x 1 | Up to max. 100. Connection: -. Thre...
€138,86 €114,76 €125,60 €103,80
You save 10%
GRANIT Sensor engine speed 12 volt
GRANIT
Version: 12 V. More
Version: 12 V.
€68,81 €56,87 €62,25 €51,45
You save 10%
Sensor fuel pressure engine
Version: Fuel pressure sensor. More
Version: Fuel pressure sensor.
€145,51 €120,26 €131,65 €108,80
You save 10%
LED work lights spotlight 19 W, 952 lm, 110 x 80 x 50 mm, 12 / 24 V
Nominal voltage (V): 12 / 24 | Voltage range (V): 9 - 36 | Bulb: LED | Bulbs included: Yes | Light function: Far-reaching illumination | Dimensions W ... More
Nominal voltage (V): 12 / 24 | Voltage range (V): 9 - 36 | Bulb: LED |...
€65,10 €53,80 €58,90 €48,68
You save 10%
External plate thickness 3 mm, inner 120 mm, outer 194,7 mm, 6 teeth
Version: Thickness: 3 mm Inner: 120 mm Outer: 194.7 mm 6 teeth More
Version: Thickness: 3 mm Inner: 120 mm Outer: 194.7 mm 6 teeth
€53,66 €44,35 €50,95 €42,11
You save 5%
Window rubber clamping range 4 - 6 mm, h 14,5 x b 23,2 mm - 1 meter
Length (m): 1 | Clamping range (mm): 4 - 6 | H (mm): 14,5 | B (mm): 23,2 More
Length (m): 1 | Clamping range (mm): 4 - 6 | H (mm): 14,5 | B (mm): 23...
€10,70 €8,84
Wabco Silencer Ø 57 mm, height 107 mm, clamp
Wabco
Version: Mounting with clamp Ø 57 mm, height 107 mm More
Version: Mounting with clamp Ø 57 mm, height 107 mm
€120,88 €99,90 €114,80 €94,88
You save 5%
Wabco Pressure relief valve 20 bar, inschakeldruk 16 bar, M16 x 1,5
Wabco
Operating pressure max. (bar): 20 | Fixing: Hole Ø 8.2 x 57 mm | Opening pressure (bar): p2 + 2,5 | Output pressure (bar): 7,4 + 0,2 | Inlet connecti... More
Operating pressure max. (bar): 20 | Fixing: Hole Ø 8.2 x 57 mm | Open...
€252,65 €208,80 €240,00 €198,35
You save 5%
GRANIT PTO shaft end piece 1 3/8 inch, 6 splines, 540/1000 rpm. John Deere
GRANIT
Version: 1 3/8”, 6 grooves, 540/1000 rpm More
Version: 1 3/8”, 6 grooves, 540/1000 rpm
€827,20 €683,64 €785,80 €649,42
You save 5%
GRANIT External plate thickness 3 mm, inner 138 mm, outer 215 mm
GRANIT
Version: thickness = 3 mm inner = 138 mm outer = 215 mm More
Version: thickness = 3 mm inner = 138 mm outer = 215 mm
€66,94 €55,32 €63,55 €52,52
You save 5%
Internal plate Hi-Lo 2,3 mm, inner 152,3 mm, outer 191,9 mm, 6 teeth
Version: thickness = 2,3 mm inner = 152,3 mm outer = 191,9 mm 6 teeth More
Version: thickness = 2,3 mm inner = 152,3 mm outer = 191,9 mm 6 teeth
€47,66 €39,39 €45,25 €37,40
You save 5%
External plate 1,5 mm, inner 99 mm, outer 152 mm, 6 teeth John Deere
Version: thickness = 1,5 mm inner = 99 mm outer = 152 mm 6 teeth More
Version: thickness = 1,5 mm inner = 99 mm outer = 152 mm 6 teeth
€38,82 €32,08 €36,85 €30,45
You save 5%
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer = 177,8 mm 6 teeth More
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer...
€47,77 €39,48 €45,35 €37,48
You save 5%
Pilot bearing 17 x 40 x 12 mm
Dimensions (mm): 17 x 40 x 12 More
Dimensions (mm): 17 x 40 x 12
€6,40 €5,29
LED work lights floodlight 3000 lm, 40 W, 9 - 32 V, 142 x 97,5 x 54 mm
Effective luminous flux (lm): 3000 | Light colour (K): 6000 | Bulb: LED | No. of LEDs: 8 | Dimensions W x H x D (mm): 142 x 97,5 x 54 | Height (mm): 9... More
Effective luminous flux (lm): 3000 | Light colour (K): 6000 | Bulb: LE...
€87,94 €72,68 €83,50 €69,01
You save 5%
GRANIT Aircon compressor 12 V, R134a, pulley Ø 120 mm, PV8 John Deere
GRANIT
Fixing: DM | Nominal voltage (V): 12 | Refrigerant: R 134a | Oil quantity (ccm): 150 | Suitable oil: PAG 46 | Pulley Ø (mm): 120 | No. of grooves: PV... More
Fixing: DM | Nominal voltage (V): 12 | Refrigerant: R 134a | Oil quant...
€459,27 €379,56 €415,50 €343,39
You save 10%
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise, oil-tight
€618,13 €510,85 €386,30 €319,26
You save 38%
GRANIT PTO shaft end piece 540 rpm., 1 3/8 inch 21 splines John Deere
GRANIT
Version: 540 rpm, length 244,5 mm, 1 3/8", 21 splines, 33 teeth, Ø 51,5 mm. More
Version: 540 rpm, length 244,5 mm, 1 3/8", 21 splines, 33 teeth, Ø 51...
€182,23 €150,60 €173,10 €143,06
You save 5%
Showing 241 - 264 of 343

John Deere 8100 parts

The John Deere 8100 from the 8000 series is a tractor many owners keep running for years, and the cooling system is usually the first area to struggle. A fan clutch that no longer grips, a sticking thermostat or an air conditioning compressor that quits. This page carries more than 350 parts for the John Deere 8100, with plenty for cooling and the engine plus cab and trailer parts.

Cooling, engine and air conditioning

For the cooling side there are fan clutches and thermostats, with gaskets to match. Engine parts include gaskets for the turbocharger oil return line, seals, sealing rings, hand pumps and sensors for engine oil pressure and fuel. There are air conditioning compressors too.

Not sure whether the fan clutch is still working? Shut the engine down after a warm run and give the fan a push by hand. If it keeps spinning for a long time, the clutch is no longer gripping and the radiator is not getting enough air. If it feels stiff, the clutch is probably fine. When you replace the thermostat, always use a new gasket, as the old one has been compressed and will not seal properly again.

Cab, lights and hitch

  • Tractor seats, including the Maximo Professional
  • LED work lights
  • Drawbars with inner part and drawbar frames
  • Connector heads for the trailer air brakes
  • PTO shaft end pieces

The parts come from GRANIT, Wabco, HELLA, ROCKINGER and GRAMMER.

The PTO shaft end piece takes a knock every time you hook up. Check the splines for burrs or distortion and give them a light coat of grease before sliding a driveshaft on. A damaged end piece also chews up the yoke of your driveshaft, so do not leave it too long.

On the air brake connector heads, the rubber ring is the weak point. If air hisses as soon as the trailer is hooked up, replace that seal or the whole head. Keep the flap shut when nothing is coupled so mud cannot settle inside.

Matching your tractor

Check the type plate to confirm it is an 8100. For seals and sensors, the reference number on the old part is the surest way to match a replacement. If it has become unreadable, measure the part and compare it with the details given for the product.

The 8000 series family

The other tractors in the same series each have their own page, so you can see what fits model by model: John Deere 8400, John Deere 8300 and John Deere 8200. For every other John Deere, from the 8R to older ranges, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart