Menu
EUR

John Deere 8230 tractor parts & technical data

View more than 250 parts for the John Deere 8230 from the 8030/8030T series. Trailer couplings, lighting, and steering and front axle parts stand out.

240 parts found for John Deere 8230
Show:
Scharmüller Forced steering inner part left Ball 80 to K50 250 mm, 2 ton
12%
Scharmüller
Forced steering inner part left Ball 80 to K50 250 mm, 2 ton
Assembly notes: Anticlockwise. Steering power: 2 t. Lock: K50. Description: Appr...
€472,38 €390,40 €417,75 €345,25
 
Scharmüller Pick-Up Hitch einsätze 80 shank 45 x 70 mm, bore 25 mm John Deere
16%
Scharmüller
Pick-Up Hitch einsätze 80 shank 45 x 70 mm, bore 25 mm John Deere
Shaft cross section W x H: 45 x 70 mm. Overhang: 390 mm. D-value: 86,1 kN. Hole ...
€1.602,71 €1.324,55 €1.349,90 €1.115,62
 
GRANIT Oil pressure switch transmission oil pressure
5%
GRANIT
Oil pressure switch transmission oil pressure
Version: Transmission oil pressure.
€173,63 €143,50 €164,90 €136,28
 
GRANIT Start switch without key and nut, blade connection
10%
GRANIT
Start switch without key and nut, blade connection
Version: With blade terminal Circuit:, 0: off, 1: consumer, 2: preheat, 3: start...
€77,00 €63,64 €69,65 €57,56
 
HELLA Beacon H1 KL Rota Compact 12 V, 55 W, Ø 133 mm, 217 mm, push-on pin
HELLA
Beacon H1 KL Rota Compact 12 V, 55 W, Ø 133 mm, 217 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: ...
€80,21 €66,29
 
Headlight left / right 12 V, H4 60/55 W, built-in, screw mounting
Headlight left / right 12 V, H4 60/55 W, built-in, screw mounting
Bulb: 12V60/55W / H4. Installation location: left / right. Nominal voltage: 12 V...
€126,35 €104,42
 
GRANIT Gaiter
GRANIT
Gaiter
€14,20 €11,74
 
GRANIT Temperature sensor thermostat housing M14 x 1,5, 40-100 °C
5%
GRANIT
Temperature sensor thermostat housing M14 x 1,5, 40-100 °C
Version: Thermostat housing M14 x 1.5 | Max. 100. Thread: M14 x 1.5. Temperature...
€56,53 €46,72 €53,70 €44,38
 
Temperature sensor inlet manifold, thread M10 x 1, 40-100 °C
10%
Temperature sensor inlet manifold, thread M10 x 1, 40-100 °C
Version: Intake manifold M10 x 1 | Up to max. 100. Connection: -. Thread: M10 x ...
€138,86 €114,76 €125,60 €103,80
 
GRANIT Sensor engine speed 12 volt
10%
GRANIT
Sensor engine speed 12 volt
Version: 12 V.
€68,81 €56,87 €62,25 €51,45
 
Sensor fuel pressure engine
10%
Sensor fuel pressure engine
Version: Fuel pressure sensor.
€145,51 €120,26 €131,65 €108,80
 
External plate thickness 5,9 mm, inner 144 mm, outer 250 mm, 8 teeth
5%
External plate thickness 5,9 mm, inner 144 mm, outer 250 mm, 8 teeth
Thickness (mm): 5,9 | Version: Inner: 144 mm Outer: 250 mm | Teeth: 8
€74,49 €61,56 €70,75 €58,47
 
External plate thickness 3 mm, inner 120 mm, outer 194,7 mm, 6 teeth
5%
External plate thickness 3 mm, inner 120 mm, outer 194,7 mm, 6 teeth
Version: Thickness: 3 mm Inner: 120 mm Outer: 194.7 mm 6 teeth
€53,66 €44,35 €50,95 €42,11
 
Window rubber clamping range 4 - 6 mm, h 14,5 x b 23,2 mm - 1 meter
Window rubber clamping range 4 - 6 mm, h 14,5 x b 23,2 mm - 1 meter
Length (m): 1 | Clamping range (mm): 4 - 6 | H (mm): 14,5 | B (mm): 23,2
€10,70 €8,84
 
Sauermann Cover trailer coupling Ø 8,2 mm HS 1700-1KUD / 3KUD 330 mm
5%
Sauermann
Cover trailer coupling Ø 8,2 mm HS 1700-1KUD / 3KUD 330 mm
Description: Ø 8.2 mm
€91,02 €75,22 €86,45 €71,45
 
GRANIT PTO shaft end piece 1 3/8 inch, 6 splines, 540/1000 rpm. John Deere
5%
GRANIT
PTO shaft end piece 1 3/8 inch, 6 splines, 540/1000 rpm. John Deere
Version: 1 3/8”, 6 grooves, 540/1000 rpm
€827,20 €683,64 €785,80 €649,42
 
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
5%
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer = 177,8 m...
€47,77 €39,48 €45,35 €37,48
 
Pilot bearing 17 x 40 x 12 mm
Pilot bearing 17 x 40 x 12 mm
Dimensions (mm): 17 x 40 x 12
€6,40 €5,29
 
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 4,86 kg
12%
Scharmüller
Forced steering 250 mm, K50, left, 2 ton, black, 4,86 kg
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Anticlockwis...
€472,38 €390,40 €417,75 €345,25
 
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise, oil-tight
38%
MAHLE
Gear reduction starter 12V 3,2 kW, 10 teeth clockwise, oil-tight
€618,13 €510,85 €386,30 €319,26
 
GRANIT Brake disc Ø 427 x 10,5 mm, 14 teeth John Deere
5%
GRANIT
Brake disc Ø 427 x 10,5 mm, 14 teeth John Deere
€418,66 €346,00 €397,70 €328,68
 
GRANIT PTO shaft end piece 540 rpm., 1 3/8 inch 21 splines John Deere
5%
GRANIT
PTO shaft end piece 540 rpm., 1 3/8 inch 21 splines John Deere
Version: 540 rpm, length 244,5 mm, 1 3/8", 21 splines, 33 teeth, Ø 51,5 mm.
€182,23 €150,60 €173,10 €143,06
 
Showing 169 - 192 of 240

John Deere 8230 parts for heavy towing and long days

A John Deere 8230 often pulls the heaviest trailers on the farm, such as an air braked tipper or a semi trailer with forced steering. This page lists more than 250 John Deere 8230 parts from GRANIT, Scharmüller, Sauermann, GRAMMER and ROCKINGER, with a good deal of attention for what sits between tractor and trailer.

Between tractor and trailer

  • Drawbars with ball and drawbar frames
  • Forced steering parts, including the inner part
  • Connector heads for the air supply line
  • Trailer control valves
  • PTO shaft ends

If the trailer brakes more slowly than usual, start with the connector heads. A damaged sealing ring or dirt in the coupling lets air escape. If they are tight, the trailer control valve may be the cause. After any repair, test the trailer brakes at low speed in the yard first.

Engine and sensors

On the engine side you will find sensors such as the oil pressure sensor, O-rings for the EGR valve, seals, gear reduction starters and aircon compressors. If the oil pressure light comes on, check the oil level first and, if needed, measure the pressure with a separate gauge. If the pressure is fine, the sensor is the likely culprit.

Cab and front axle

For the cab there are tractor seats, among them air suspended Maximo seats, and LED work lights with a flood beam. Ball joints are available for the front axle.

A PTO shaft end with play or worn splines makes the driveshaft knock and wears out the implement's coupling faster. Check that the driveshaft lock clicks home every time you hitch up, and keep the stub clean and lightly greased. Always renew the EGR valve O-ring when the valve comes off, even if the old one looks fine. LED work lights need little care, but a loose plug or a damaged cable at the cab is a common reason for flickering. On forced steering, grease the joints regularly so the trailer tracks cleanly in tight turns.

The right part for your 8230

Model and serial number are on the type plate. Sensors, starters and trailer control valves often carry a reference number on the old part, which you can compare with the item on this page.

The 8230 belongs to the John Deere 8030 series, and its siblings each have a page of their own:

Other John Deere tractors, including older series, are on the John Deere parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart