Menu
EUR

John Deere 8335R tractor parts & technical data

Need a trailer coupling, a lamp or a part from the electrics for the John Deere 8335R? This page groups more than 200 parts for the 8R/8RT series by model.

215 parts found for John Deere 8335R
Show:
Internal plate PTO shaft 2,9 mm, inner 112,8 mm, outer 177,8 mm, 6 teeth
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer = 177,8 mm 6 teeth More
Menke no.: 221680 | Version: thickness = 2,9 mm inner = 112,8 mm outer...
€47,77 €39,48 €45,35 €37,48
You save 5%
Pilot bearing 17 x 40 x 12 mm
Dimensions (mm): 17 x 40 x 12 More
Dimensions (mm): 17 x 40 x 12
€6,40 €5,29
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 4,86 kg
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Conn... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: An...
€472,38 €390,40 €417,75 €345,25
You save 12%
FEBI AdBlue Dosing Module John Deere 8R (Tier 4F) 8245R, 8270R, 8295R
FEBI
AdBlue Dosing Module John Deere 8R (Tier 4F) 8245R, 8270R, 8295R More
AdBlue Dosing Module John Deere 8R (Tier 4F) 8245R, 8270R, 8295R
€477,95 €395,00 €323,22 €267,12
You save 32%
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise, oil-tight
€618,13 €510,85 €386,30 €319,26
You save 38%
GRANIT Brake disc Ø 427 x 10,5 mm, 14 teeth John Deere
€418,66 €346,00 €397,70 €328,68
You save 5%
Rail pressure sensor John Deere
€294,03 €243,00 €279,30 €230,83
You save 5%
Water pump John Deere 8130-8530, 8225R-8345RT
€316,80 €261,82 €300,95 €248,72
You save 5%
GRANIT Filler cap for expansion tank, opening pressure 1,13 bar
GRANIT
Version: for expansion tank. Opening pressure: 1,13 bar. More
Version: for expansion tank. Opening pressure: 1,13 bar.
€55,85 €46,16
GRANIT Air hose intercooler Ø 76 mm, 152,5 mm John Deere
GRANIT
Inner Ø: 76 mm. Length: 152,5 mm. Reference no.: R210097. More
Inner Ø: 76 mm. Length: 152,5 mm. Reference no.: R210097.
€131,12 €108,36 €124,55 €102,93
You save 5%
GRANIT Cylinder head bolt special 9/16" x 186 mm John Deere
GRANIT
Dimensions: 9/16" x 186 mm. More
Dimensions: 9/16" x 186 mm.
€23,00 €19,01
GRANIT Cylinder head gasket John Deere 8245R-8360R, 8320RT-8360RT
€105,85 €87,48 €100,55 €83,10
You save 5%
GRANIT Injector John Deere 8310R-8370R, 9360R
Sleeve John Deere 7200R-8530
Sauermann Forced steering left ball-Ø 50 mm, 69 x 50/80 mm John Deere
Sauermann
Assembly notes: Anticlockwise. Colour: Green. Hole pattern: 69 x 50/80 mm. Ball Ø: 50 mm. More
Assembly notes: Anticlockwise. Colour: Green. Hole pattern: 69 x 50/80...
€913,55 €755,00 €867,85 €717,23
You save 5%
GRANIT Sensor air temperature
GRANIT
Version: For air temperature. More
Version: For air temperature.
€46,11 €38,11 €43,80 €36,20
You save 5%
GRANIT Magnetic sensor engine speed thread Ø 20 mm, length 36 mm
GRANIT
Thread: Ø 20 mm. Length: 36 mm. More
Thread: Ø 20 mm. Length: 36 mm.
€36,20 €29,92
Boost pressure sensor
€212,68 €175,77 €192,40 €159,01
You save 10%
GRANIT Rail pressure sensor pressure control valve fuel injectors rail
GRANIT
Version: Pressure control valve - fuel (common rail). More
Version: Pressure control valve - fuel (common rail).
€157,66 €130,30 €149,75 €123,76
You save 5%
Showing 169 - 192 of 215

John Deere 8335R parts for the hitch, electrics and engine

This page collects more than 200 replacement parts that fit the John Deere 8335R, made by GRANIT, Sauermann, HELLA, ROCKINGER, Scharmüller and others. A tractor of this size spends much of its life pulling heavy trailers and implements, so the hitch area is a good place to start.

Hitch and trailer brakes

For coupling up you will find drawbars with a ball, separate drawbar frames and adapter plates. Owners running a trailer with forced steering can replace the inner parts of that steering system, which takes the play out of the link between tractor and trailer. Connector heads for the supply and brake lines and trailer control valves complete the picture for air braked trailers.

A workshop tip on those connector heads: keep the dust caps closed whenever nothing is hooked up. Grit and water wear out the rubber seal quickly, and a leaking coupling usually shows itself as trailer brakes that respond late. If a head looks worn, replace it as a whole rather than just the seal.

With forced steering, check the ball mounting on the tractor before each season. If the ball moves in its holder, the trailer no longer tracks cleanly through bends and pushes its rear outward, which also scrubs the trailer tyres.

Engine sensors and starting

In the engine bay there are oil pressure sensors, temperature sensors for the inlet manifold, fuel line O-rings and a gear reduction starter. A faulty sensor can push the tractor into a limp mode even though the part itself is small and quick to change. An aircon compressor for the cab and seals for the door hinges and pull handles are here too.

When the evenings draw in, LED work lights, halogen work lamps and beacons keep the yard and the field lit.

Getting the right part for your 8335R

Check the type plate first so you know for certain you are working on an 8335R. Once the old part is off, look for a stamped or printed reference number and compare it with the parts on this page. That small step avoids ordering a sensor with the wrong thread.

The 8335R belongs to the John Deere 8R/8RT series. Each of the other tractors in that series has its own page with the parts that fit it:

For any other model of the brand, start from the John Deere parts overview, which lists every type with its own page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart