Menu
EUR

John Deere 8400 tractor parts & technical data

In the parts catalogue the John Deere 8400 belongs to the 8000/8000T range. Here you get more than 300 matching parts, including lighting and electrics.

332 parts found for John Deere 8400
Show:
Sensor warning buzzer with adjustable geluidsniveau
Sensor warning buzzer with adjustable geluidsniveau
Version: Warning buzzer, Adjustable volume.
€47,65 €39,38
 
HELLA Rubber plugs push-on pin DIN/ISO 14620
HELLA
Rubber plugs push-on pin DIN/ISO 14620
Material: Rubber. To fit: Socket pipes. Additional information: • To protect the...
€8,55 €7,07
 
Relays changeover contact 12 V / 30 - 40 A, 5-pin, without bracket
Relays changeover contact 12 V / 30 - 40 A, 5-pin, without bracket
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal.
€14,15 €11,69
 
GRANIT Solenoid switch starter motor 12 V, 80 A, with screw connection
10%
GRANIT
Solenoid switch starter motor 12 V, 80 A, with screw connection
Version: 12 V / 80 A With screw connections.
€68,83 €56,88 €62,25 €51,45
 
LED work lights spotlight 60 W, 5830 lm, 110 x 85 mm, 12 / 24 V
10%
LED work lights spotlight 60 W, 5830 lm, 110 x 85 mm, 12 / 24 V
Nominal voltage (V): 12 / 24 | Voltage range (V): 11 - 32 | Bulb: LED | Bulbs in...
€207,84 €171,77 €188,00 €155,37
 
Centa Elastic clutch size 25 John Deere 1750-8400
5%
Centa
Elastic clutch size 25 John Deere 1750-8400
To fit as: John Deere 3640, 1550, 1750, 1850, 1950, 2250, 2450, 2650, 2850, 3050...
€404,97 €334,69 €384,70 €317,93
 
Scharmüller Hitch automatic 82,4 kN, rail 311 mm, locking pin Ø 22 mm
Scharmüller
Hitch automatic 82,4 kN, rail 311 mm, locking pin Ø 22 mm
Plate height (mm): 120 | Detent pin Ø (mm): 22 | D-value (kN): 82,4 | Rail width...
€1.128,50 €932,64
 
Scharmüller PUH-Einsatz Ball 80 K80, 60 x 90 mm, 450 mm, bore 32,3 mm
Scharmüller
PUH-Einsatz Ball 80 K80, 60 x 90 mm, 450 mm, bore 32,3 mm
Load capacity (t): 2.5 | Hole Ø (mm): 32.3 | Version: Inserts K80 | Category: Pi...
€1.375,55 €1.136,82
 
Wabco Barb female thread M22 x 1,5, SW 27, 42 mm
Wabco
Barb female thread M22 x 1,5, SW 27, 42 mm
G (mm): M22 x 1,5 | SW: 27
€16,10 €13,31
 
Stabilus Gas strut 240 N, 232 mm, stroke 46 mm John Deere
5%
Stabilus
Gas strut 240 N, 232 mm, stroke 46 mm John Deere
Newtons: 240 | d1 (mm): 8 | Stroke (mm): 46 | A (mm): 232 | D (mm): 10 | B (mm):...
€187,79 €155,20 €178,40 €147,44
 
Wabco Pressure regulator afblaasdruk 8,1 bar, safety valve 12 bar, M22 x 1,5
5%
Wabco
Pressure regulator afblaasdruk 8,1 bar, safety valve 12 bar, M22 x 1,5
Control range: 0,6 +0,4 | Safety valve opening pressure (bar): 12 +2 | Pressure ...
€525,14 €434,00 €498,85 €412,27
 
Wabco Pressure regulator afblaasdruk 7,3 bar, safety valve 12 bar, M22 x 1,5
10%
Wabco
Pressure regulator afblaasdruk 7,3 bar, safety valve 12 bar, M22 x 1,5
Control range: 0,6 +0,4 | Safety valve opening pressure (bar): 12 +2 | Pressure ...
€666,37 €550,72 €602,90 €498,26
 
Wabco Trailer control valve with drukbegrenzing 8 bar, M22 x 1,5, NW 10 mm
10%
Wabco
Trailer control valve with drukbegrenzing 8 bar, M22 x 1,5, NW 10 mm
Connection: M22 x 1.5 | To fit: Mercedes and others | Nominal width (mm): 10 | W...
€585,42 €483,82 €529,65 €437,73
 
Connector head M16 x 1,5 yellow, brake line, vehicle
Connector head M16 x 1,5 yellow, brake line, vehicle
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no.: 55929
€22,55 €18,64
 
MAHLE Aircon compressor 10PA17C 24 V, pulley Ø 146 mm, 8 grooves John Deere
38%
MAHLE
Aircon compressor 10PA17C 24 V, pulley Ø 146 mm, 8 grooves John Deere
Suitable oil: PAG 46 | For compressor: 10PA17C | Reference no.: ACP 776 000S | N...
€616,87 €509,81 €385,50 €318,60
 
HELLA Interior lights 12 V with switch John Deere 3320 - 8360RT
HELLA
Interior lights 12 V with switch John Deere 3320 - 8360RT
Switches: Yes | Type: Bulb | Mounting type: Flush mounting | Bulb: K (10W) | Int...
€38,91 €32,16
 
Alternator 14 V / 140 A, flange 57 mm John Deere
5%
Alternator 14 V / 140 A, flange 57 mm John Deere
Mounting hole Ø / R (mm): 10,5 / 86,0 | Installation angle (°): 0 | Nominal volt...
€246,84 €204,00 €234,45 €193,76
 
Denso Alternator 14 V / 140 A, flange 58 mm, pulley Ø 62,5 mm John Deere
5%
Denso
Alternator 14 V / 140 A, flange 58 mm, pulley Ø 62,5 mm John Deere
Charging current (A): 140 | Flange size (mm): 58 | Mounting hole Ø / R (mm): 1x ...
€753,15 €622,44 €715,45 €591,28
 
GRANIT Ball joint 680 mm, M27 x 1,5, M28 x 1,5, taper 32 - 37 mm
5%
GRANIT
Ball joint 680 mm, M27 x 1,5, M28 x 1,5, taper 32 - 37 mm
A: 680 mm. C: M27 x 1,5 mm. D: M28 x 1,5 mm. E: 32 mm. F: 37 mm. Taper: 32 - 37 ...
€275,93 €228,04 €262,10 €216,61
 
GRANIT Hand pump M16 x 1,5 Fendt, John Deere, Case IH, Fiat, Deutz-Fahr, Linde
GRANIT
Hand pump M16 x 1,5 Fendt, John Deere, Case IH, Fiat, Deutz-Fahr, Linde
Version: M16 x 1.5. Thread: M16 x 1.5.
€13,80 €11,41
 
GRANIT EGR valve John Deere 6150M, 6170M, 6140R-6210R
GRANIT
EGR valve John Deere 6150M, 6170M, 6140R-6210R
€1.314,90 €1.086,69
 
GRANIT Thermostat Ø 54 mm, 82 °C John Deere
GRANIT
Thermostat Ø 54 mm, 82 °C John Deere
Ø: 54 mm. Temperature: 82 °C.
€25,95 €21,45
 
Showing 97 - 120 of 332

John Deere 8400 parts for cooling, cab comfort and hitching

The John Deere 8400 spends its working life on heavy draft jobs, and the parts that wear are the ones that keep it cool, keep the driver comfortable and keep implements attached. This page brings together more than 300 parts that fit the 8400, supplied by GRANIT alongside HELLA, Wabco, ROCKINGER and GRAMMER.

What fits the 8400

On the engine side there are fan clutches, thermostats, engine sensors and a hand pump for bleeding the fuel system. Seals, sealing rings and gaskets come in many forms, including a gasket for the exhaust gas recirculation valve. For the cab you will find air conditioning compressors and tractor seats such as the air suspended GRAMMER Maximo Professional, plus LED work lights from HELLA and others. At the rear there are drawbars and drawbar frames from ROCKINGER, Wabco connector heads for trailer air brakes and PTO shaft ends.

Checking a tired fan clutch

If your 8400 runs hot in summer even with a clean radiator, the fan clutch is a likely suspect. With the engine cold, turn the fan by hand. It should move with light resistance. After a run, with the engine at working temperature, that resistance should be clearly higher. If the fan spins just as easily hot as cold, or there is oil around the hub, the clutch is no longer engaging properly and replacing it is the only real cure. Since the thermostat sits in the same cooling circuit, it makes sense to change it at the same time.

Matching the right part

Start with the serial plate to confirm you are working on an 8400. After that, the quickest route is the reference number on the old part, moulded into a gasket or printed on the housing of a sensor or compressor. Some items fit several John Deere tractors and say so, such as sealing rings listed for the 7R, the 8R and the 8000 range. When in doubt, hold the old part next to the photo and description before you order.

Other tractors in the 8000 range

If you also look after another model from this range, it has its own page showing only the parts listed for that tractor, which keeps you from ordering for the wrong machine.

Every other model from the brand is listed under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart