Menu
EUR

John Deere 8420 tractor parts & technical data

Need parts for a John Deere 8420? This 8020 series tractor is covered here with more than 200 items, among them trailer couplings, lighting and electrics.

228 parts found for John Deere 8420
Show:
Dayco V-belt Powerband 2065 mm, 8 ribs heavy duty
Dayco
Length: 2065 mm. Ribs: 8 n. Version: Heavy Duty. More
Length: 2065 mm. Ribs: 8 n. Version: Heavy Duty.
€63,89 €52,80 €60,65 €50,12
You save 5%
Injector John Deere series 8020, CTS 9650, STS 9760, WTS 9680
€599,19 €495,20 €569,20 €470,41
You save 5%
Vibration damper John Deere 8225R-8360RT, Series 7020-8530
€66,89 €55,28 €63,50 €52,48
You save 5%
GRANIT Tensioning pulley Ø 86,5 / 39,37 mm John Deere
GRANIT
Outer Ø: 86,5 mm. Width: 39,37 mm. More
Outer Ø: 86,5 mm. Width: 39,37 mm.
€96,97 €80,14 €92,10 €76,12
You save 5%
Piston set Ø 116 mm, piston pin 47,62 mm, engine 6081
€347,89 €287,51 €330,45 €273,10
You save 5%
GRANIT Tank cap tank collar Ø 82,4 mm
GRANIT
Filler neck Ø: 82,4 mm. More
Filler neck Ø: 82,4 mm.
€109,00 €90,08
Main bearing standard John Deere
€44,71 €36,95 €42,45 €35,08
You save 5%
GRANIT Outlet valve John Deere
€37,75 €31,20
GRANIT Oil sump gasket cast iron sump engine 6081 Powertech John Deere
€65,30 €53,97 €62,00 €51,24
You save 5%
GRANIT Cylinder head gasket engine 6081 Powertech 8,1 L John Deere
€68,18 €56,35 €64,75 €53,51
You save 5%
GRANIT O-ring Ø 9,2 x 2,6 mm
GRANIT
Dimensions: Ø 9.2 x 2.6 mm. More
Dimensions: Ø 9.2 x 2.6 mm.
€1,07 €0,88
GRAMMER Tractor seat Maximo Evolution Dynamic MSG95EL/741 John Deere
GRAMMER
To fit: John Deere. Suspension: Air suspension. Upholstery type: Fabric / new design. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 m... More
To fit: John Deere. Suspension: Air suspension. Upholstery type: Fabri...
€6.582,40 €5.440,00 €6.253,25 €5.167,98
You save 5%
GRANIT Wiper motor John Deere Series 7R-9630T, SE6010-6930 PR
€251,32 €207,70 €238,75 €197,31
You save 5%
GRANIT Rear-view mirror glass 299,5 x 215 mm, unheated John Deere
GRANIT
Dimensions: 299.5 x 215 mm. Version: Unheated. Installation location: Right/left. Radius of curvature: 2100 mm. More
Dimensions: 299.5 x 215 mm. Version: Unheated. Installation location: ...
€76,23 €63,00 €72,40 €59,83
You save 5%
Gas strut door or rear window 150 N, 505 mm Fendt, John Deere
suitable for: Tür- oder Heckscheibe. Newtons: 150. A: 505 mm. B: 255 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: door or rear screen. More
suitable for: Tür- oder Heckscheibe. Newtons: 150. A: 505 mm. B: 255 ...
€32,90 €27,19
GRANIT Lock pin John Deere 6105R-6125R
GRANIT Seal John Deere 7R, 8R/8RT, 8000-8030
€33,93 €28,04 €32,20 €26,61
You save 5%
Showing 97 - 120 of 228

John Deere 8420 parts

An 8420 often works from first light until well after dark, which makes good lighting and a decent seat part of the toolkit rather than a luxury. This page brings together more than 200 John Deere 8420 parts covering lights and seating, hitching, cooling and engine wear parts. They come from GRANIT, ROCKINGER, GRAMMER, Walterscheid and HELLA.

Lights and the driver's seat

LED work lights with a wide flood beam light up the headland when you are ploughing or mowing at night. For the cab there are air suspended tractor seats, including a GRAMMER Maximo Professional.

If an air seat keeps sinking, check the air hoses and the compressor connection before replacing the bellows. A small leak at a fitting or a split hose is a common cause, and with the engine off you can usually hear it hiss.

Hitching and PTO

At the back of the tractor you can pick from ball drawbars, drawbar frames and connector heads for the trailer air brake. If you pull a trailer with forced steering, the matching ROCKINGER parts for the drawbar frame are here as well. PTO shaft ends complete this group. Replace a stub whose splines are worn or damaged in good time, otherwise it also wears the hub of every driveshaft you slide onto it.

If the alternator charges weakly, check belt tension before condemning it. A worn V-belt tensioner lets the belt slip, and even a healthy alternator then cannot keep the battery topped up.

Cooling and engine

Thermostats, gaskets, seals and sealing rings keep the engine tight and at the right temperature. Whenever you fit a new thermostat, renew the gasket or O-ring of the housing too and bleed the cooling system properly afterwards, otherwise an air pocket can make the gauge jump around. You will also find alternators, V-belt tensioners, engine sensors and a gasket for the turbocharger oil return line.

Ordering for the right 8420

Read the model and serial number from the rating plate and compare them with whatever is marked on the part you are replacing. Seals and gaskets rarely carry anything legible, so make a note of exactly where the old one sat. On alternators and other electrical parts the reference number is normally on a sticker or plate on the housing.

The 8420 belongs to the 8020 series. Its sister models each have a dedicated page: John Deere 8220, John Deere 8320 and John Deere 8520. For any other tractor from the brand, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart