Menu
EUR

John Deere 8420 tractor parts & technical data

Need parts for a John Deere 8420? This 8020 series tractor is covered here with more than 200 items, among them trailer couplings, lighting and electrics.

228 parts found for John Deere 8420
Show:
GRANIT Thermostat Ø 54 mm, 85 °C John Deere
GRANIT Gasket John Deere 4040-4960, 7700-9120
GRANIT Sealing washer fuel line Ø 12,17 x 17,72 x 9,3 mm John Deere
GRANIT
Dimensions: Ø 12.17 x 17.72 x 9.3 mm. Description: For fuel line. More
Dimensions: Ø 12.17 x 17.72 x 9.3 mm. Description: For fuel line.
€5,15 €4,26
Radiator cap grommet-Ø 57 mm, height 25 mm, for expansion tank
Version: For expansion tank. Neck Ø: 57 mm. Height: 25 mm. More
Version: For expansion tank. Neck Ø: 57 mm. Height: 25 mm.
€15,30 €12,64
Water pump with gasket John Deere
€228,07 €188,49 €216,65 €179,05
You save 5%
Optibelt Powerband V-belt 8 grooves fan drive John Deere
Optibelt
Description: For fan drive. More
Description: For fan drive.
€60,14 €49,70 €57,10 €47,19
You save 5%
GRANIT O-ring cylinder head Ø 18,72 x 2,61 mm John Deere
GRANIT
Description: Ø 18.72 x 2.61 mm. More
Description: Ø 18.72 x 2.61 mm.
€2,71 €2,24
GRANIT Thrust bearing standard John Deere
€111,07 €91,79 €105,50 €87,19
You save 5%
GRANIT Crankshaft seal rear Ø 123 x 146 x 17 mm John Deere
€65,10 €53,80 €61,80 €51,07
You save 5%
GRANIT Seal rear cover engine John Deere
Exhaust gasket John Deere
GRANIT Exhaust gasket John Deere
€6,25 €5,17
GRANIT Sealing washer return line outer-Ø 10,5 mm, inner-Ø 5,6 mm
GRANIT
Dimensions: Height 5.4 <lt>br<gt> Outer Ø 10.5 <lt>br<gt> Inner Ø 5.6</gt></lt></gt></lt> mm. Outer Ø: 10,5 mm. Height: 5,4 mm. Inner Ø: 5,6 mm. M... More
Dimensions: Height 5.4 <lt>br<gt> Outer Ø 10.5 <lt>br<gt> Inner Ø 5....
€2,40 €1,98
Silencer John Deere 8120-8530
€741,73 €613,00 €704,60 €582,31
You save 5%
GRANIT Oil cooler John Deere 4240, 4055-4455
€283,95 €234,67 €269,75 €222,93
You save 5%
GRAMMER Tractor seat Maximo Comfort Plus MSG95A/731 John Deere
GRAMMER
To fit: John Deere. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 mm. Joystick c... More
To fit: John Deere. Suspension: Air suspension. Upholstery type: Fabri...
€2.331,20 €1.926,61
GRANIT Gas strut 125 N, 385 mm, stroke 154 mm John Deere Series 7020-9630T
GRANIT
Newtons: 125. A: 385 mm. B: 190 mm. C: 10 mm. D: 10 mm. Stroke: 154 mm. d1: 6 mm. d2: 15 mm. Form: 6. Menke no.: 221635. More
Newtons: 125. A: 385 mm. B: 190 mm. C: 10 mm. D: 10 mm. Stroke: 154 mm...
€75,75 €62,60 €71,95 €59,46
You save 5%
GRANIT Handle right and left John Deere SE6100-6930 PR
€89,54 €74,00 €85,00 €70,25
You save 5%
Pick-up hitch hook ISO 60 x 60 mm, 280 mm, bore Ø 22,5 mm
Hole Ø: 22.5 mm. Width x height: 60 x 60 mm. Length: 280 mm. Hole spacing: 115 mm. More
Hole Ø: 22.5 mm. Width x height: 60 x 60 mm. Length: 280 mm. Hole spa...
€323,72 €267,54 €307,50 €254,13
You save 5%
Scharmüller Pick-Up Hitch einsätze 80 shank 45 x 70 mm, bore 25 mm John Deere
Scharmüller
Shaft cross section W x H: 45 x 70 mm. Overhang: 390 mm. D-value: 86,1 kN. Hole spacing: 150 mm. Load capacity: 3000 kg. Hole: 25 mm. Length: 469 mm. ... More
Shaft cross section W x H: 45 x 70 mm. Overhang: 390 mm. D-value: 86,1...
€1.602,71 €1.324,55 €1.349,90 €1.115,62
You save 16%
Showing 145 - 168 of 228

John Deere 8420 parts

An 8420 often works from first light until well after dark, which makes good lighting and a decent seat part of the toolkit rather than a luxury. This page brings together more than 200 John Deere 8420 parts covering lights and seating, hitching, cooling and engine wear parts. They come from GRANIT, ROCKINGER, GRAMMER, Walterscheid and HELLA.

Lights and the driver's seat

LED work lights with a wide flood beam light up the headland when you are ploughing or mowing at night. For the cab there are air suspended tractor seats, including a GRAMMER Maximo Professional.

If an air seat keeps sinking, check the air hoses and the compressor connection before replacing the bellows. A small leak at a fitting or a split hose is a common cause, and with the engine off you can usually hear it hiss.

Hitching and PTO

At the back of the tractor you can pick from ball drawbars, drawbar frames and connector heads for the trailer air brake. If you pull a trailer with forced steering, the matching ROCKINGER parts for the drawbar frame are here as well. PTO shaft ends complete this group. Replace a stub whose splines are worn or damaged in good time, otherwise it also wears the hub of every driveshaft you slide onto it.

If the alternator charges weakly, check belt tension before condemning it. A worn V-belt tensioner lets the belt slip, and even a healthy alternator then cannot keep the battery topped up.

Cooling and engine

Thermostats, gaskets, seals and sealing rings keep the engine tight and at the right temperature. Whenever you fit a new thermostat, renew the gasket or O-ring of the housing too and bleed the cooling system properly afterwards, otherwise an air pocket can make the gauge jump around. You will also find alternators, V-belt tensioners, engine sensors and a gasket for the turbocharger oil return line.

Ordering for the right 8420

Read the model and serial number from the rating plate and compare them with whatever is marked on the part you are replacing. Seals and gaskets rarely carry anything legible, so make a note of exactly where the old one sat. On alternators and other electrical parts the reference number is normally on a sticker or plate on the housing.

The 8420 belongs to the 8020 series. Its sister models each have a dedicated page: John Deere 8220, John Deere 8320 and John Deere 8520. For any other tractor from the brand, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart