Menu
EUR

New Holland TD5.85 tractor parts & technical data

Brakes, transmission, electrics or a trailer coupling for the New Holland TD5.85? You will find it among the more than 180 parts for this model.

184 parts found for New Holland TD5.85
Show:
Thrust washer Ø 171,1 x 94,3 mm, thickness 2,65 mm
Thickness: 2,65 mm. Outer Ø: 171,1 mm. Inner Ø: 94,3 mm. More
Thickness: 2,65 mm. Outer Ø: 171,1 mm. Inner Ø: 94,3 mm.
€22,60 €18,68
As transmission New Holland TD 4.70F-5.110, 65F-85F
€232,56 €192,20 €220,90 €182,56
You save 5%
GRANIT Half shaft right rear axle New Holland TD55-TD95, TD5010-TD5050
€618,61 €511,25 €587,65 €485,66
You save 5%
Control gear transmission 50 teeth Fiat, New Holland
Number of teeth: 50. More
Number of teeth: 50.
€652,46 €539,22 €619,80 €512,23
You save 5%
GRANIT Shift ring transmission Fiat, New Holland
€107,73 €89,03 €102,30 €84,55
You save 5%
Gear wheel gears 23 teeth Fiat, New Holland
Number of teeth: 23. More
Number of teeth: 23.
€164,77 €136,17 €156,50 €129,34
You save 5%
Bowden cable 658 mm Case IH, New Holland
€14,10 €11,65
Borg Warner Cooling fan electric Ø 450 mm, thread M24 x 1,5 L
Borg Warner
Ø: 450 mm. Thread: M24 x 1.5 L. More
Ø: 450 mm. Thread: M24 x 1.5 L.
€406,75 €336,16 €357,00 €295,04
You save 12%
Intercooler Case IH, New Holland Series TD5-TD4000F, TD4.70F-TD5.95
€231,18 €191,06 €219,60 €181,49
You save 5%
Borg Warner Cooling fan Ø 450 mm New Holland, Steyr, Case IH
€250,95 €207,40 €220,25 €182,02
You save 12%
GRANIT Heating flange Case IH, Steyr, New Holland
€127,79 €105,61 €121,40 €100,33
You save 5%
Gas strut rear window 320 N, 460 mm, stroke 182 mm Case IH, New Holland
suitable for: Heckscheibe. Newtons: 320. A: 460 mm. B: 245 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 8 mm. d2: 18 mm. Stroke: 182 mm. To fit: rear screen. More
suitable for: Heckscheibe. Newtons: 320. A: 460 mm. B: 245 mm. C: 8 mm...
€36,00 €29,75
Rear-view mirror tractor, construction machinery, forklifts
€68,12 €56,30 €64,70 €53,47
You save 5%
GRANIT Clutch shaft transmission Fiat, IHC, New Holland
€643,01 €531,41 €610,85 €504,83
You save 5%
GRANIT Shim brake Ø 171,1 x 94,3 mm, thickness 3 mm Case IH, New Holland
GRANIT
Inner Ø (mm): 94,3 | Outer Ø (mm): 171,1 | Thickness (mm): 3 More
Inner Ø (mm): 94,3 | Outer Ø (mm): 171,1 | Thickness (mm): 3
€15,73 €13,00 €14,90 €12,31
You save 5%
SACHS Thrust bearing 50 x 80 mm, 89 x 22 mm
SACHS
Dimensions (mm): 50 x 80 89 x 22 More
Dimensions (mm): 50 x 80 89 x 22
€84,70 €70,00 €72,85 €60,21
You save 14%
LUK Clutch kit without bearing Case IH, New Holland, Steyr
LUK
Contents: Pressure plate 458128043410, clutch plate 458328033210 More
Contents: Pressure plate 458128043410, clutch plate 458328033210
€666,41 €550,75 €633,00 €523,14
You save 5%
LUK Clutch kit double plate connection without release bearing, 30,50 kg
LUK
Contents: Pressure plate 458228007714, clutch plate 458328018616 | Supplementary set: Without release bearing | Connection: For vehicles with double-d... More
Contents: Pressure plate 458228007714, clutch plate 458328018616 | Sup...
€761,39 €629,25 €723,30 €597,77
You save 5%
LUK Thrust bearing PTO clutch 75 x 115 x 20 mm
LUK
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€175,89 €145,36 €167,00 €138,02
You save 5%
LUK Thrust bearing PTO shaft 70 x 110 x 20 mm
LUK
Dimensions (mm): 70 x 110 x 20 More
Dimensions (mm): 70 x 110 x 20
€120,88 €99,90 €114,80 €94,88
You save 5%
Showing 121 - 144 of 184

New Holland TD5.85 parts

Play in the steering, an engine that runs hot or a PTO that no longer engages cleanly are complaints most TD5.85 owners meet sooner or later. This page holds more than 180 parts that fit the tractor, from GRANIT, ROCKINGER, LUK, GRAMMER and Eaton.

Driveline, PTO and clutch

For the driveline there are gear wheels for the gearbox, shafts such as the PTO input shaft, sealing rings and thrust bearings. Clutch plates and complete clutch kits cover the clutch itself.

Steering and front axle

Ball joints and track rods are the steering parts that wear first. Have someone turn the wheel back and forth while you watch each joint. If the housing moves relative to the pin, the joint is due. After replacing a track rod or ball joint, always reset the toe-in, or the front tyres will wear out quickly.

Cooling and charging

Radiators and cooling fans keep engine temperature in check. A radiator clogged on the outside with chaff and dust cools poorly, so blow it out regularly from the inside outwards. Alternators are available too.

Hitch and seat

At the rear there are automatic drawbars and Piton Fix parts. In the cab, seats such as the Compacto and gas struts look after comfort.

Replacing gears and shafts

When a gear in the gearbox has to be replaced, inspect the gear it meshes with as well. Damaged teeth on one side nearly always leave marks on the other. While the box is open, clean the magnetic drain plug and look at what it has collected. Fine paste is normal, but larger flakes of metal point to a problem that has not been found yet. Renew any sealing rings and thrust bearings you come across on the way, so a minor leak never forces you to strip the box a second time.

Making sure it fits your TD5.85

Read the type plate first so you know for certain the tractor is a TD5.85. For gear wheels and shafts, the reference number on the old part is the safest point of comparison. If it can no longer be read, count the teeth and check them against the product details.

Within the New Holland range, this tractor belongs to the TD5 line-up. The other models in that series have pages of their own:

For tractors from other New Holland ranges, go to the overview of all New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart