Menu
EUR

New Holland TD5.85 tractor parts & technical data

Brakes, transmission, electrics or a trailer coupling for the New Holland TD5.85? You will find it among the more than 180 parts for this model.

184 parts found for New Holland TD5.85
Show:
LUK Clutch kit double plate connection without release bearing, 30,50 kg
LUK
Contents: Pressure plate 458228007714, clutch plate 458328018616 | Supplementary set: Without release bearing | Connection: For vehicles with double-d... More
Contents: Pressure plate 458228007714, clutch plate 458328018616 | Sup...
€761,39 €629,25 €723,30 €597,77
You save 5%
LUK Thrust bearing PTO clutch 75 x 115 x 20 mm
LUK
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€175,89 €145,36 €167,00 €138,02
You save 5%
LUK Thrust bearing PTO shaft 70 x 110 x 20 mm
LUK
Dimensions (mm): 70 x 110 x 20 More
Dimensions (mm): 70 x 110 x 20
€120,88 €99,90 €114,80 €94,88
You save 5%
GRANIT Track rod M20 x 1, 1460 mm, taper 18 - 20,2 mm Case IH, New Holland
GRANIT
G (mm): 18 - 20,2 | C (mm): 18 - 20,2 | D (mm): M20 x 1 | E (mm): 35 | A (mm): 1460 | B (mm): M20 x 1 More
G (mm): 18 - 20,2 | C (mm): 18 - 20,2 | D (mm): M20 x 1 | E (mm): 35 |...
€262,52 €216,96 €249,35 €206,07
You save 5%
HELLA Alternator 14 V / 120 A, pulley Ø 55 mm, 8 grooves
HELLA
Additional information: With V-ribbed belt pulley | Pulley Ø (mm): 55 | Nominal values (V / A): 14 / 120 | No. of grooves: 8 | Charging current (A): ... More
Additional information: With V-ribbed belt pulley | Pulley Ø (mm): 55...
€604,38 €499,49 €485,90 €401,57
You save 20%
GRANIT Airco compressor 12 V, R 134a, pulley Ø 112 mm, PV4, 190 ccm oil
GRANIT
Nominal voltage (V): 12 | Refrigerant: R 134a | Suitable oil: PAG 46 | No. of grooves: PV4 | Cylinder capacity (cm³): 154,8 | Fixing: DM | Oil quanti... More
Nominal voltage (V): 12 | Refrigerant: R 134a | Suitable oil: PAG 46 |...
€424,92 €351,17 €403,65 €333,60
You save 5%
FEBI Powerband multi-rib belt 8 ribs Case IH, Steyr, New Holland
FEBI
To fit as: New Holland More
To fit as: New Holland
€32,86 €27,16 €12,02 €9,93
You save 63%
FEBI Engine oil filter LF16117
€32,61 €26,95 €20,58 €17,01
You save 37%
MAHLE Starter motor with reduction 12 V, 3,2 kW, 10 teeth, mounting length 215,8 mm
€449,03 €371,10 €280,60 €231,90
You save 38%
GRANIT Ball head 80 mm, M20 x 1, taper 18,2 - 20,2 mm
GRANIT
A: 80 mm. D: M20 x 1 mm. E: 18,2 mm. F: 20,2 mm. Taper: 18,2 - 20,2 mm. More
A: 80 mm. D: M20 x 1 mm. E: 18,2 mm. F: 20,2 mm. Taper: 18,2 - 20,2 mm...
€31,86 €26,33 €30,25 €25,00
You save 5%
Master brake cylinder mineral oil piston Ø 38,3 mm Case IH, New Holland
€171,34 €141,60 €162,75 €134,50
You save 5%
As transmission New Holland TD 4020F-5030, 60D-95D
€214,90 €177,60 €204,15 €168,72
You save 5%
GRANIT Planetary gear transmission 19 / 14 teeth New Holland
GRANIT
Number of teeth: 19/14. More
Number of teeth: 19/14.
€79,84 €65,98 €75,80 €62,64
You save 5%
Planetary gear transmission 19 / 14 teeth New Holland
Number of teeth: 19/14. More
Number of teeth: 19/14.
€56,60 €46,78 €53,75 €44,42
You save 5%
GRANIT Gear wheel transmission New Holland TD55D-TD5050
€966,26 €798,56 €917,90 €758,60
You save 5%
GRANIT Sleeve for transmission Fiat, New Holland
€242,29 €200,24 €230,15 €190,21
You save 5%
GRANIT Intermediate gear reversing clutch 28/38 teeth New Holland, Fiat
GRANIT
Number of teeth: 28/38. More
Number of teeth: 28/38.
€299,26 €247,32 €284,25 €234,92
You save 5%
Radiator Case IH Farmall 85A, 95A, New Holland TD5.85, TD5.95
To fit as: New Holland Series TD5: TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, TD5.115; Case IH Series Farmall: Farmall 65A, 75A, 85A, 95A, 105A, 115A Ti... More
To fit as: New Holland Series TD5: TD5.65, TD5.75, TD5.85, TD5.95, TD5...
€505,26 €417,57 €479,95 €396,65
You save 5%
GRAMMER Seat Compacto COMFORT W MSG93/721, air suspended, PVC, 482 mm
GRAMMER
Suspension: Air suspension. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 227 mm. Seat width: 482 mm. Fore/aft isolator: Yes. Rest... More
Suspension: Air suspension. Upholstery type: PVC. Seat contact switch:...
€1.364,09 €1.127,35 €1.295,85 €1.070,95
You save 5%
GRANIT Sealing ring piston 110 x 114 x 4 mm Fiat, Ford, New Holland
GRANIT
Dimensions: 110 x 114 x 4 mm. More
Dimensions: 110 x 114 x 4 mm.
€17,45 €14,42
Aircon compressor 12 V, pulley Ø 112 mm, 4 grooves, 190 ccm oil
No. of grooves: 4 | Oil quantity (ccm): 190 | Suitable oil: PAG 46 | Nominal voltage (V): 12 | Pulley Ø (mm): 112 | Refrigerant: R 134a | Fixing: DM More
No. of grooves: 4 | Oil quantity (ccm): 190 | Suitable oil: PAG 46 | N...
€475,11 €392,65 €451,35 €373,02
You save 5%
GRANIT Thrust bearing single PTO clutch 70 x 110 x 20 mm
GRANIT
Dimensions (mm): 70 x 110 x 20 More
Dimensions (mm): 70 x 110 x 20
€34,61 €28,60 €32,85 €27,15
You save 5%
Showing 145 - 168 of 184

New Holland TD5.85 parts

Play in the steering, an engine that runs hot or a PTO that no longer engages cleanly are complaints most TD5.85 owners meet sooner or later. This page holds more than 180 parts that fit the tractor, from GRANIT, ROCKINGER, LUK, GRAMMER and Eaton.

Driveline, PTO and clutch

For the driveline there are gear wheels for the gearbox, shafts such as the PTO input shaft, sealing rings and thrust bearings. Clutch plates and complete clutch kits cover the clutch itself.

Steering and front axle

Ball joints and track rods are the steering parts that wear first. Have someone turn the wheel back and forth while you watch each joint. If the housing moves relative to the pin, the joint is due. After replacing a track rod or ball joint, always reset the toe-in, or the front tyres will wear out quickly.

Cooling and charging

Radiators and cooling fans keep engine temperature in check. A radiator clogged on the outside with chaff and dust cools poorly, so blow it out regularly from the inside outwards. Alternators are available too.

Hitch and seat

At the rear there are automatic drawbars and Piton Fix parts. In the cab, seats such as the Compacto and gas struts look after comfort.

Replacing gears and shafts

When a gear in the gearbox has to be replaced, inspect the gear it meshes with as well. Damaged teeth on one side nearly always leave marks on the other. While the box is open, clean the magnetic drain plug and look at what it has collected. Fine paste is normal, but larger flakes of metal point to a problem that has not been found yet. Renew any sealing rings and thrust bearings you come across on the way, so a minor leak never forces you to strip the box a second time.

Making sure it fits your TD5.85

Read the type plate first so you know for certain the tractor is a TD5.85. For gear wheels and shafts, the reference number on the old part is the safest point of comparison. If it can no longer be read, count the teeth and check them against the product details.

Within the New Holland range, this tractor belongs to the TD5 line-up. The other models in that series have pages of their own:

For tractors from other New Holland ranges, go to the overview of all New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart